What is a return curtain rod?

Category: home and garden interior decorating
4.1/5 (139 Views . 17 Votes)
The return usually represents the amount of material that you will want to add to your drapery panel width so that it can bend back to meet the wall. One of the most important tasks when deciding on curtain rods is getting the sizes right. Or, more simply, how long a product sticks out from the wall.



Similarly one may ask, what is curtain rod projection?

Projection is the measurement of the full extension of the curtain rod bracket, front to back, from the mounting plate to the outer point/end. It is measured from the front of the bracket back to the wall. This is the overall extension of the bracket, front to back.

Furthermore, where do brackets go on curtain rod? Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.)

In this manner, what is a French return curtain rod?

French Return Curtain Rods French Rods are one of the most popular window treatments. Elegant and durable, bent French Returns add style while providing full fabric closure on both ends of your drapery treatment. And, completely functional for draperies with rings when using optional bypass brackets.

What type of curtain rod do I need?

Steps

  • Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy.
  • Measure 3–6 inches (7.6–15.2 cm) beyond the window frame for rod length.
  • Select a rod with support brackets at least every 50 inches (130 cm).

30 Related Question Answers Found

How many curtain rod brackets do I need?

Count how many brackets are included with the curtain rod. As a general rule, there should be at least one bracket for each outside corner of the window, and one bracket in the center. Add more brackets if the expanse between the middle and outer brackets is more than three feet.

How far should a curtain rod be from the wall?

Extending the rod three to six inches beyond the frame on each side makes a window feel grander and allows extra light to stream in when the curtains are open (the fabric hangs against the wall without blocking the glass).

What height should I hang my curtain rod?

A rule of thumb (from Architectural Digest) is that curtains should be hung between 4 to 6 inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

How do you extend a curtain rod from the wall?

  1. Find the studs along the outer edge of window frame with a stud finder and mark their location.
  2. Hold the curtain rod against the wall at the height you want to install it with the help of an assistant.
  3. Place and hold the brackets against the wall underneath the curtain rod to determine the proper spacing.

Does Bed Bath and Beyond sell curtain rods?


Curtain Rods & Hardware | Bed Bath & Beyond.

What is a double curtain rod?

A double curtain rod allows you to hang two sets of curtains and work them independently of each other. You have to move one to move the other, which defeats the purpose of having a curtain lining.

How far should drapery rod extend past window?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window's edges.

What is a French Rod?

French Rods (also called "French Poles") are one of the most popular drapery hardware styles right now. Instead of cutting off in midair, French style curtain rods return to the wall.

Does IKEA sell curtain rods?

Curtain rods & rails
Our curtain rails allow panel curtains to span any length and even go around corners. Our versatile curtain rods have a corner solution, too, and offer many choices of finial to complete the look. The hardware may be simple, but the possibilities are almost endless.

How do you hang a French curtain rod?


Ask an assistant to hold the brackets and curtain panels against the French door where you want them positioned. Use a small level to straighten the rod above the window. Mark the mounting bracket holes with a pencil on the door. Use the tape measure to double check that you centered the rod over the window.

How can I hang curtains without drilling holes?

Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side.

Do curtains need to touch the floor?

As a general decorating rule, drapes should be long enough to touch the floor. The amount of drapery material reaching the floor depends on the desired look of the curtains once they are hanging around the windows.

Do curtains have to hit the floor?

To finish off the illusion that your window is gigantic, your curtains must touch the ground. Because of the line the curtains make with your eye, they need to at least touch the floor. No more hang-man curtains, or short curtains, in your space.

Do curtain rods need to be hang on studs?

Wall studs are usually placed at 16 or 24 inches on-center. If no wall studs are available, install wall anchors in the drywall. Screw the curtain rod brackets into the wall anchors.

How much does it cost to put up a curtain rod?


Cost to Install a Curtain Rod
Item details Qty Low
Unused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. 0.0 h $0
Totals - Cost To Install Curtain Rod 6 EA $509
Average Cost per Rod $84.75

How do you fix a traverse curtain rod?

Replace broken slides so the rod continues to function as intended and the curtains do not sag.
  1. Unhook the curtains from the rod.
  2. Pull the string so that the slides move toward the ends of the rod.
  3. Lift the rod from the brackets.
  4. Pull the finial closest to the broken slide off the drapery rod.

How do you fix a stuck curtain rod?

With a few easy steps, however, you can troubleshoot and fix your stuck drapery rod.
  1. Open or close your draperies to the place where they are actually sticking.
  2. Set ladder at the base of your curtains, climb it and visually inspect your curtain rod.
  3. Examine the rod track of your drapery.