Why is my Indesit tumble dryer not drying?

If you find that your Indesit Condenser dryer is taking a long time to dry then this could be due to a build up of fluff in the condenser. The condenser is found at the bottom of your appliance. Simply take this out by grasping the bottom cover by the ides and pull it off gently towards you.

Just so, why is my tumble dryer not drying?

Reset your tumble dryer's thermal overload cut out In many cases, if your dryer is not heating it's because the heater fuse has tripped or the thermal overload has cut out. Some clothes dryers – particularly older models – have a red reset button on their back panel.

Subsequently, question is, why does my condenser tumble dryer take so long to dry? The drum seal is a common culprit if you're experiencing long drying times, the drum seal is a felt like material that cushions your dryer's drum they also stop excess air from entering the machine.

Also to know is, why is my Indesit washer dryer not drying?

We recommend the following: Ensure that the vent hose is not blocked or crushed. Ensure that your Indesit washer dryer is not being overfilled with clothing as this will impair the performance. Double check the heat switch on your dryer is set to the appropriate position.

How do I reset my dryer?

Many dryers are equipped with a reset button on the control panel. If the motor won't run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.

39 Related Question Answers Found

How do you fix a dryer?

Fix. Fortunately, replacing a heating element isn't a terribly difficult job. You can usually find a replacement heating element at a local hardware store or online by searching for your dryer model number. Once you have the part, unplug the dryer, remove the back panel, remove the connections and install the new one.

Do condenser tumble dryers take longer to dry clothes?

While conventional tumble dryers release the hot air used to dry to clothes, heat pump technology conserves and reuses it. It will take longer to dry clothing, this is due to the maximum temperature being reached is 50°C, in comparison to the full heat of a condenser dryer which is 70-75°C.

Do all tumble dryers have a reset button?

In some models this should be easily fixable – some tumble dryers have reset buttons on the back of the machine so all you will need to do is hold in the button and wait for it to click.

How do I clean the condenser in my tumble dryer?

How to Clean a Condenser Dryer: Step by Step

Step 0:Make sure the machine is turned off.
Step 1: Locate the Condenser.
Step 2: Remove the Access Panel.
Step 3: Remove the Condenser Door.
Step 4: Pull out the Condenser.
Step 5: Wash the Condenser.
Step 6: Dry the Condenser.
Step 7: Wipe off any remaining lint and put everything back together.

Does condenser tumble dryer need ventilation?

Condenser tumble dryers don't require an externally-vented hose, so you'll enjoy the freedom of installing them wherever you want, provided the room is well-ventilated. The water removed from your clothes is collected in a container underneath the machine, and needs to be regularly emptied.

How long should a tumble dryer last?

Around 10 to 15 Years

What does it mean when your dryer doesn't get hot?

With an electric clothes dryer, no heat often means that the circuit breaker or fuse that controls the power has blown; reset or replace it. Be aware that a dryer may have two breakers or fuses. The motor will run when one works, but the heating element requires both.

Can you run a dryer without a thermal fuse?

Operating a dryer with a bypassed thermal fuse is both unnecessary and unsafe, so a bypass should only be done long enough to troubleshoot a potential problem. Even short usage without a thermal fuse in place could result in irreparable damage to the appliance or injury to yourself.

Should the back of my dryer be hot?

It is not uncommon for the back of your model dryer to get hot and discolor overtime. The electric heating element is located just on the other side of the rear panel. The lack of air flow can be caused by a restricted venting system, or a bad felt drum seal or air duct seal in the dryer.

What is Loc on candy tumble dryer?

Thank you for your question and I understand your concern. The "LOC" indicates the (Control Lock). This means the control panel has been locked and it will have to be unlocked before you can use the dryer. To unlock the control panel; press and release the Option and Select buttons at the same time.

Where is the fuse on a Hotpoint Dryer?

The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer's heat source such as the heating element on electric drye rs or at the burner on gas models.

Why are my clothes still wet after drying?

A clogged dryer vent often is the reason for damp clothes at the end of a drying cycle. It's frustrating to toss a load of damp clothing into the dryer only to return to find them as wet as when you put them in. The reason clothes are still wet at the end of a drying cycle might be as simple as a clogged vent.

How do I turn off my Indesit dryer?

To switch off the washer-dryer during the wash cycle, press and hold the button for approximately 3 seconds; if the button is pressed briefly or accidentally the machine will not switch off. If the machine is switched off during a wash cycle, this wash cycle will be cancelled.

Why is my washing machine not drying?

Washing Machine Drain Hose – Clogged or Bent

If the washer is not spin drying your clothing, check the drain hose on the very back of your washing machine. Make sure the drain hose is not bent therefore restricting water to drain out and leaving your clothing wet even after spin dry mode is complete.

Which Indesit dryers have been recalled?

The issue relates to more than 600 models of vented and condenser tumble dryers made by Hotpoint, Indesit, Creda, Swan and Proline - all part of the Whirlpool brand - between 2004 and 2015.

The affected brands are:

Hotpoint.
Indesit.
Creda.
Swan.
Proline.

How do I reset my Indesit washing machine?

Each model will vary in the resetting procedure but a basic guide is shown below:

Turn the power off and the knob to reset.
Select the required programme.
Press the power button to restart the washing machine.
Press the Cancel button to clear the error.
Push Pause or Stop to reset.

Why is it taking longer for my dryer to dry clothes?

A dryer's drying time is largely related to the flow of air through the machine and the condition of the venting hose. If air is impeded in its pathway out of the dryer, or if there is a blockage in the venting hose, it could reduce the rate at which clothes are drying in your dryer.