What is the best chain for chainsaw?

The 10 Best Chainsaw Chains

Trilink 18″ S62 Chainsaw Chain – Best Value.
Oregon R34 AdvanceCut Chain-Saw Chain.
Oregon D72 AdvanceCut 20-Inch Chainsaw Chain.
Husqvarna 18″ Chainsaw Chain.
Husqvarna 24″ Chainsaw Replacement Chain.
Stihl 2-Pack 18″ Chainsaw Chains.
8TEN Chain Saw Chain (18-inch)
SUNGATOR 18-Inch Chain Saw Chain.

Consequently, what is the best chainsaw chain for cutting firewood?

Best Chainsaw Chains for Firewood Cutting 2019

Chainsaw Chain Model	Chain Pitch Size	Type
1. Husqvarna H30	0.325"	Micro-Chisel
2. Oregon ControlCut	0.325"	Semi-Chisel
3. Oregon SpeedCut (Very fast cutting speed and easy maintance! Very efficient chain.)	0.325"	Micro-Chisel / Narrow Kerf
4. Oregon 91VXL	3/8"	Semi-Chisel

Also Know, can I use any chain for my chainsaw? Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That's why electric saws use bars 18" and shorter. Similarly, chainsaw chains are measured to fit certain bars.

Considering this, what is the most aggressive chainsaw chain?

Stihl chain is a little more expensive but it's the most aggressive chain commonly available. It's also made from the hardest steel so it holds an edge better than any other brand I've tried (including Carlton, Saber and Bailey's Woodsman Pro).

Do drive links matter on chainsaw?

Number of individual drive links must be counted. No exceptions. Simple length measurements (like "a 2 foot chain) are not helpful for correctly matching chains. Chain length is determined by a combination of distance between links (pitch) and the number of links.

39 Related Question Answers Found

How many links does a 18 inch chainsaw have?

A 16" bar normally requires 66 drive links with . 325 chain, Stihl is 67 but they gotta be different. 72 indicates an 18" bar. The dealer is correct if you had 3/8" chain.

What size file do I need for a 3/8 chain?

It is vital to use the right size file. In general, 1/4- and 3/8-inch-pitch, low-profile chains call for a 5/32-inch file; 0.325-inch-pitch chains require a 3/16-inch file; and standard 3/8-inch-pitch and 0.404-inch-pitch chains demand a 7/32-inch file.

When should I replace chainsaw chain?

When to Replace a Chainsaw Chain

Teeth are broken or worn unevenly.
Issues with Chain Tension.
Smoke is present when cutting.
Sawdust, rather than coarse chips are left behind.
Chainsaw feels unbalanced, cuts unevenly, or rattles when in use.

What do the numbers mean on chainsaw chains?

The three numbers that you'll find on chain packaging are the pitch, gauge, and number of drive links. These numbers describe the various aspects of each chain and you need to ensure that they're compatible with your chainsaw if you want your tool to run safely and efficiently.

What is a 3/8 low profile chain?

While looking for a 3/8" chain with a . The low Profile chain is lighter in weight and size requiring less power to operate and is design was for both electric and gas powered chainsaws with engine sizes up to 42cc. A standard chain is designed for chainsaws with engine sizes 50cc and up.

How many drive links in a 36 chain?

114 Drive Links

Can you change the bar length on a chainsaw?

Can you put a longer bar on a chainsaw? The answer is yes and no. Many chainsaws are designed to take different size units. For example, the Husqvarna 460 Rancher is commonly sold with a 20 inch bar and chain.

How many times can a chainsaw chain be sharpened?

Depending on usage, a chain can usually be sharpened 3 to 5 times max.

What is the fastest cutting chainsaw chain?

Fastest cutting is Square ground chisel chain such as the Oregon CJ & CK. This chain is sharpened with a square, not round file and is not something most, non professional folks mess with.

Why does my chainsaw chain dull so quickly?

You may be putting to steep of an angle on the cutters, which will dull quickly. You're rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.

How tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.

Do chainsaw sharpeners really work?

Chainsaw sharpeners work incredibly well and they come in a variety of different models. However, when using electrical sharpeners, you need to be careful to make sure that you don't overdo it – filing the cutters down too low can cause problems for you and your chainsaw later on.

What is a full chisel chainsaw chain?

The full chisel chain has square-cornered teeth, splitting wood fibers easily in the cut for fast, efficient cutting in clean softwood. These chains are available for semi-pro (also called pro-sumer) and professional saws.

Does a ripping chain cut faster?

Ripping chains are slower as the finer cut and surface takes more time than regular cutting.

What is chainsaw kickback?

Chainsaw Kickback. Kickback is the most common cause of serious chainsaw injury accidents. It may occur when the moving chain at the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.

What is a ripping chain?

Ripping chain is a special chain designed for cutting parallel to the wood grain. This chain features a special factory grind for making boards and planks from larger timbers using chainsaw powered mills like the Alaskan Saw Mill. This blunter filing angle makes ripping cuts better than conventional saw chain.

What Chainsaw do professional loggers use?

Generally the Pro grade Stihls, Husquvarna (XP series), Johnserred (pretty much same as Huskys) with a smattering of Dolmars, Oleo Macs and a couple of others. Pro Mac 610 is a 60cc saw, so something like a Stihl MS 362 or a Husky 357XP would be the current replacement.