What is the best brand of chainsaw chain?

The 10 Best Chainsaw Chains

Oregon S56 AdvanceCut Chainsaw Chain – Best Overall.
Oregon S52 AdvanceCut Chainsaw Chain.
Trilink 18″ S62 Chainsaw Chain – Best Value.
Oregon R34 AdvanceCut Chain-Saw Chain.
Oregon D72 AdvanceCut 20-Inch Chainsaw Chain.
Husqvarna 18″ Chainsaw Chain.
Husqvarna 24″ Chainsaw Replacement Chain.

In respect to this, what is the best chainsaw chain for cutting firewood?

Best Chainsaw Chains for Firewood Cutting 2019

Chainsaw Chain Model	Chain Pitch Size	Type
1. Husqvarna H30	0.325"	Micro-Chisel
2. Oregon ControlCut	0.325"	Semi-Chisel
3. Oregon SpeedCut (Very fast cutting speed and easy maintance! Very efficient chain.)	0.325"	Micro-Chisel / Narrow Kerf
4. Oregon 91VXL	3/8"	Semi-Chisel

Beside above, what is the best angle to sharpen a chainsaw chain? Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it's best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain.

Besides, are Oregon chains as good as Stihl?

The stihl chain is good but more $$$ and the Oregon is good chain but soft IMO.

Can you put a chainsaw chain on backwards?

Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut. Remember, when holding the chainsaw, the cutting portion of the blade should be facing away from you, traveling from the back of the chainsaw to the front tip of the chainsaw.

35 Related Question Answers Found

Do drive links matter on chainsaw?

Number of individual drive links must be counted. No exceptions. Simple length measurements (like "a 2 foot chain) are not helpful for correctly matching chains. Chain length is determined by a combination of distance between links (pitch) and the number of links.

When should I replace chainsaw chain?

When to Replace a Chainsaw Chain

Teeth are broken or worn unevenly.
Issues with Chain Tension.
Smoke is present when cutting.
Sawdust, rather than coarse chips are left behind.
Chainsaw feels unbalanced, cuts unevenly, or rattles when in use.

How many links does a 18 inch chainsaw have?

A 16" bar normally requires 66 drive links with . 325 chain, Stihl is 67 but they gotta be different. 72 indicates an 18" bar. The dealer is correct if you had 3/8" chain.

How do I know my chain size?

To determine the pitch (chain size), you'll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

What size file do I need for a 3/8 chain?

It is vital to use the right size file. In general, 1/4- and 3/8-inch-pitch, low-profile chains call for a 5/32-inch file; 0.325-inch-pitch chains require a 3/16-inch file; and standard 3/8-inch-pitch and 0.404-inch-pitch chains demand a 7/32-inch file.

What do the numbers on a chainsaw bar mean?

So, what do the numbers on a chainsaw chain mean? The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. Pitch and gauge are important dimensions which influence whether or not a chain is compatible with a chainsaw.

Why does my chainsaw chain dull so quickly?

You may be putting to steep of an angle on the cutters, which will dull quickly. You're rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.

What is the fastest cutting chainsaw chain?

Fastest cutting is Square ground chisel chain such as the Oregon CJ & CK. This chain is sharpened with a square, not round file and is not something most, non professional folks mess with.

How tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.

Do chainsaw sharpeners really work?

Chainsaw sharpeners work incredibly well and they come in a variety of different models. However, when using electrical sharpeners, you need to be careful to make sure that you don't overdo it – filing the cutters down too low can cause problems for you and your chainsaw later on.

What is a full chisel chain?

The full chisel chain has square-cornered teeth, splitting wood fibers easily in the cut for fast, efficient cutting in clean softwood. These chains are available for semi-pro (also called pro-sumer) and professional saws.

Who owns Stihl?

Stihl Holding AG & Co. KG

What is chainsaw kickback?

Chainsaw Kickback. Kickback is the most common cause of serious chainsaw injury accidents. It may occur when the moving chain at the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.

What is a ripping chain?

Ripping chain is a special chain designed for cutting parallel to the wood grain. This chain features a special factory grind for making boards and planks from larger timbers using chainsaw powered mills like the Alaskan Saw Mill. This blunter filing angle makes ripping cuts better than conventional saw chain.

How long should a chainsaw blade last?

That's an important question, and the condition of your chain has a big impact on the performance and safety of your chainsaw. So, how long does a chainsaw chain last? A chainsaw chain can last for 5+ years with frequent use.

Where are Stihl chains made?

STIHL is the only chainsaw manufacturer to produce its own guide bars and saw chain. The original guide bar facility is located in Waiblingen, Germany, and saw chain manufacturing is based in Switzerland.

Who makes Woodland Pro chain?

Today the big two sawchain companies Stihl and Oregon, have made their chain cut aggressively right out of the box . Carlton/Woodland Pro are still ground with angles we had 30 years ago.