What is a standard bathtub size?

For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

Similarly, it is asked, what is the most common bathtub size?

The two most common tub sizes are 60 inches long by 30 inches wide and 60 inches long by 32 inches wide. A standard rectangular-shaped tub, however, will have a smaller dimensioned bathing well, measuring 55 inches by 24 inches at the top and narrowing to 45 inches by 22 inches at the very bottom.

Furthermore, what is a good size for a soaking tub? Typical soaking tubs range in length from 60 to 72 inches. It's common for the average soaking tub to hold around 250 gallons of water. Soaking tubs are available as single- or two-person bathtubs.

Regarding this, what is the standard shower size?

Typical Dimensions The typical shower stall is 36 inches wide by 36 inches deep. Other common dimensions are 36 inches by 42 inches and 36 inches by 48 inches. For smaller bathrooms, a shower stall measuring 30 inches by 30 inches combines function with space-saving design.

What is the size of an average bathtub?

In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

28 Related Question Answers Found

How are bathtubs measured?

How to Measure the Dimensions of a Bathtub

Stand in front of the bathtub, like you were about to get in.
Measure the distance from the left side of the bathtub to the right.
Repeat the measuring process going from the back wall, or back of the tub, to the front.
Measure the height of the bath tub from the floor of your bathroom to the top of the bathtub.

What is better porcelain or acrylic tubs?

Acrylic surfaces are less resistant to scratches than porcelain, and acrylic can be repaired much more easily than porcelain. Acrylic is warmer to the touch than porcelain, and acrylic tubs retain the heat of the bath water in them longer than iron or steel tubs do.

What is the deepest bathtub available?

american standard evolution bathtub at a glance

allows 3-inches more water than a traditional bathtub.
recessed tub with apron.
dual armrests.
backrest.
measures 5-feet by 32-inches.
requires deep soak max drain. (sold separately)

How deep should a bathtub be?

14 to 17 inches

What should I look for when buying a bathtub?

Bathtub Materials

Plastic: Made of either fiberglass or acrylic, plastic bathtubs offer the greatest design flexibility because they can be molded into many shapes.
Enameled steel: Formed steel bathtubs with a porcelain-enamel coating are the least expensive tubs.

How much does it cost to remove and install a bathtub?

Bathtub Installation or Replacement Costs

The average cost to install a bathtub is $3,399, but can range from $1,080 and $5,747, depending on the type of tub and modifications needed. The average cost of the tub itself ranges from $200 to $2,000 or more.

What is the smallest space for a toilet?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

What is minimum size for walk in shower?

36 inches by 36 inches

What is the minimum size for a bathroom with shower?

Showers and Bathtubs

Shower floor minimum size is usually mandated to be at least 30 inches square; that is, 30 inches by 30 inches. Because shower doors are usually glass and can break (and because of other access issues), bathroom code says that shower doors need to have at least 24 inches of opening clearance.

How do you design a bathroom layout?

As you plan your bathroom, here are some tips to create a layout that will work for you:

The toilet sets the tone.
Take a headcount.
Consider storage.
Give yourself space.
Overlap space.
Clear the air.

What is a comfortable size for a shower?

While you can see standard shower sizes as small as 32″ x 32″, most people would feel comfortable in a 48″ x 36″ size shower. If your home has a little more space available, a very common recommendation is to have a shower with minimum dimensions of 60'' x 36''.

Does a walk in shower add value?

In general, removing a tub and installing a well-appointed walk-in shower also increases the value of a home. That being said, if you have to choose between a bathtub and a walk-in shower, and most of us do, it's important to consider if you have another tub.

How deep is a vanity?

21 inches

Does a walk in shower need a door?

Walk-in showers without doors can be installed in a corner or can replace a bathtub and/or existing shower. Because there is an opening to the rest of the bathroom, the walls and flooring need to be designed to contain water. This no-threshold walk-in shower was designed for an individual with compromised mobility.

What size is a large shower?

Standard Shower Size

The standard walk in shower size is usually 170cm in length and 70cm in width, which is large enough to replace a standard sized bath. While this is the standard size for many showers, we suggest getting one as big as possible for your bathroom as the extra space is always beneficial.

What is the difference between a soaking tub and regular tub?

A standard tub is generally 2-1/2 by 5 feet and approximately 14 or 15 inches deep so the water will not completely cover an adult's body. In contrast, soaking tubs vary greatly in size. They are typically about 20 inches deep and allow water to cover most or all of the body.

How tall should a tub filler be?

By most codes, the proper height for the spout, where the water comes out of it, above the top edge of the tub is no less than 6 inches.