What is the bathtub size?

In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

People also ask, what is the standard size of a bathtub?

Standard tubs with apron fronts are 60 inches (152 centimeters) long and 30 to 32 inches (76 to 81 centimeters) wide. The depth can be as little as 14 inches (35 centimeters) and as much as 20 inches (50 centimeters).

Secondly, how do you measure a bathtub? How to Measure the Dimensions of a Bathtub

Stand in front of the bathtub, like you were about to get in.
Measure the distance from the left side of the bathtub to the right.
Repeat the measuring process going from the back wall, or back of the tub, to the front.
Measure the height of the bath tub from the floor of your bathroom to the top of the bathtub.

Just so, what is the smallest bathtub size?

48 inches

How small can a tub be?

According to the National Kitchen & Bath Association, a standard bathtub is a minimum of 60 inches long and 30 to 32 inches wide. Within the scaled-down category, you'll come across 30-inch-wide tubs that are as short as 48 inches.

22 Related Question Answers Found

What is the deepest bathtub available?

american standard evolution bathtub at a glance

allows 3-inches more water than a traditional bathtub.
recessed tub with apron.
dual armrests.
backrest.
measures 5-feet by 32-inches.
requires deep soak max drain. (sold separately)

What is the average bathtub length and width?

For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

Are all bathtubs 60 inches?

Tubs are 60" long, so most bathrooms are framed at 60-1/4" so that the tub will fit in. Then you add 1/2" backer board on both sides, that adds one more inch, then tile over that, which depending on the tile may get you to 58" finished.

How much space is needed for a bathtub?

There should be at least 24 inches of clear space in front of a toilet or bidet. While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide.

How deep is a vanity?

21 inches

How many square feet is a bathtub?

And the one element that takes up the most space is the bathtub or bathtub/shower combination. A standard-sized bathtub displaces over 13 square feet of floor space.

How long is a small bath?

For a small bath, it is around 1400mm-1500mm long and 700mm wide, whereas a large bath will be roughly 1800mm long and around 800mm wide, these are often freestanding baths in larger bathrooms with plenty of space.

Do corner baths save space?

Corner baths

Unlike straight edge baths, the rounded corner doesn't protrude into the space. This subtle corner saves on precious floor space, providing extra space to walk around your bathroom. Corner baths come as left hand or right hand fittings, so you can fit into the best corner for your bathroom.

Are whirlpool baths worth it?

There is no doubt that a whirlpool tub is a pricier investment compared with a regular tub. You will also need to consider the additional power required to heat water. However, by examining the benefits of a whirlpool tub, the investment will be worth it in the long run.

Can you put a freestanding bath in a small bathroom?

Most freestanding tubs in small bathrooms are located against at least one wall. When you put a bath in this location you can have the taps on the wall to save space on the tub, or you can have the taps integrated into the tub as normal. Check the dimensions of your room and the dimensions of the bath carefully.

Can you put a soaking tub in a small bathroom?

Soaking tubs are part of the dream home and owning a small bathroom doesn't mean you can't enjoy the aroma, sensation and relaxation of a good soaker tub. The following deep bathtubs are designed for small bathrooms. What they lose in depth or width, they make up in both comfort and price.

What is an ofuro tub?

An ofuro is a bathtub. The concept began in Japan - a DEEP, hot soaking bathtub. Zen Bathworks customers appreciate the beautiful modern aesthetic of a hand-crafted, warm, natural wood tub. The simple beauty and traditional design combined with unusual depth offer the bather a bit of luxury that is easy to use.

Is a bathtub required in a home?

While you may not need or want a tub in your house, not having one will likely place a severe limit on the number of potential buyers and/or adversely affect the resale value. Depending upon your 'oldness' you may not want to sit in a tub, but you might want/need to sit in a shower at some point in the future.

How much does it cost to remove and install a bathtub?

Bathtub Installation or Replacement Costs

The average cost to install a bathtub is $3,399, but can range from $1,080 and $5,747, depending on the type of tub and modifications needed. The average cost of the tub itself ranges from $200 to $2,000 or more.

Does Home Depot install bathtubs?

Home Depot can help ease accessibility in your bathroom by replacing your existing tub or shower with a walk-in tub. From in-home consultation to product selection to professional installation, we're with you every step of the way. Plus, you can rest easy knowing the installation is backed by a 1-year labor warranty.

How do you install a bathtub over concrete?

How to Install a Bathtub on a Cement Floor

Apply self-leveling compound with a notched trowel on the concrete where the new acrylic tub will sit.
Set the new tub in place over the existing plumbing drain and line up with any tub spout plumbing, such as a copper water feed.