What is a fascia on House?

The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.

Also question is, what is the purpose of fascia on a house?

The primary function of the fascia is to protect the roof and the interior of the home from moisture by blocking its entrance. Fascias also play an aesthetic role, because they create a smooth, even appearance along the roof's edge. House fascia can be vulnerable to damage if water gets behind the board.

Furthermore, how much does it cost to replace soffits and fascia? Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.

Similarly one may ask, what is soffit and fascia on a house?

Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.

What is the difference between trim and fascia?

is that trim is (uncountable) decoration; especially, decoration placed along edges or borders while fascia is a wide band of material covering the ends of roof rafters, sometimes supporting a gutter in steep-slope roofing, but typically it is a border or trim in low-slope roofing.

37 Related Question Answers Found

How many layers of fascia are there?

There are three layers of fascia types. Each with its own distinct function and properties.

What exactly is fascia?

Fascia is a medical term for connective tissue that is a fluid, fibrous network covering all of the structures in our body like a spider web. Fascia covers nerves, muscles, bones, and organs down to the cellular level. Think of normal fascia as cooked spaghetti in a zip-lock bag filled with water.

Why is water dripping between gutter and fascia?

If water is dripping behind your gutter, it's probably because it was installed without any flashing over the back of the gutter. The gutter apron will prevent the dripping. A gutter apron is a bent piece of flashing that tucks up under the shingles and over the gutter.

How do you pronounce the word fascia?

noun, plural fas·ci·ae [fash-ee-ee] for 1, 3–5; fas·cias [fey-shuh z] for 2. a band or fillet, as for binding the hair. Also called fascia board. facia.

What size fascia do I need?

Replacement fascias do vary in thickness by manufacturer, but the rule of thumb is that to qualify structurally as a replacement board they should be somewhere between 16mm and 25mm thick - our most common range is the 18mm Replacement Fascia.

Do roofers replace fascia?

Soffit, Fascia, Gutter, and Eaves Replace & Repair Estimator

Most often, you'll want to replace your fascia when you replace or repair gutters. Most licensed contractors can typically repair or install all three. Contractors will typically charge by the project, ranging anywhere from a $600-$6,000.

How do you fix fascia behind gutters?

Remove the gutters from the areas where you are going to replace the fascia board. Common residential gutters are installed using long nails that secure the gutter to the facial board. To remove them, carefully pry the nails away from the gutter using the pry bar or hammer claw.

Are fascia boards necessary?

Fascia is meant to protect the roof and the interior of the home from moisture by blocking it from entry. It does have an aesthetic role as well; it creates an even appearance along the roof's edge. If water gets behind the fascia board, it is vulnerable to damage.

Is fascia part of roof?

Roofing Parts-The Purpose of the Fascia & Soffit. Every part of your roofing structure has a lot to do with keeping your home dry and comfortable. Fascia, on the other hand, is a part that can easily be damaged. It is the parallel edge that is connected to the ends of the trusses or rafters.

How do you cut fascia?

Cut aluminum fascia, soffit and drip edge to width by scoring it with a sharp utility knife. Guide the score with a straightedge for flat work. Then either peel back the material or bend it back and forth until it snaps off. You could use metal snips, but this method yields a cleaner, straighter cut.

How is fascia attached?

The fascia board is the vertical face that is attached to the ends of the rafters directly under the roof line. Fascia is typically made from 1-inch thick lumber. Use 1-inch lumber in the appropriate width for your joists to create fascia.

Where is fascia located on a house?

The fascia board is the long, straight board that runs along the lower edge of the roof. The fascia is fixed directly to the lower ends of the roof trusses and usually does all the work of supporting the lower edge of the bottom row of tiles.

What is the overhang on a house called?

eaves

What kind of wood to use for fascia?

Wood is the most common material used to make fascia. Typically, wood fascia boards are made of spruce, pine or fir. However, cedar fascia boards (same wood for decks) are gaining steam.

What is the best material for fascia boards?

Cedar is a popular fascia wood and redwood is another. That's because both species resist rot and moisture very well, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive. You construct fascia boards out of 1-inch lumber.

Is it OK to pressure wash soffits and fascia?

Although it's safe to pressure wash soffits, there are few important things to remember: One key point to keep in mind is the water pressure. A high-pressure water blasting can be dangerous for your attic. Be aware of the falling debris when you pressure wash.

What is the average cost to replace fascia boards?

Typical costs for vinyl or wood fascia boards and soffits range from $6 to $10 per linear foot, and the cost to fit out a simple single-level home is anything from $600 to $2,000. The price of aluminum fascia ranges from $8 to $20 or more, and the budget for a single-story home ranges from $800 to $6,000.