How much does it cost to retile a bathtub surround?

Category: style and fashion bath and shower
4.5/5 (171 Views . 14 Votes)
The cost to retile a bathroom ranges between $1,000 and $10,000. The average cost to retile bathrooms is $12.50 per square foot. These prices include professional installation.

Consequently, how much does it cost to tile a bathtub surround?

For tile, materials and installation, a tub surround costs about $3,000 to $4,000, says Carlos Martinez, first officer of C-Bek Tile & Stone Design in North Hollywood, California. Floor tile adds another $3,000 to $4,500 or more, depending on the room's size.

Similarly, how much does it cost to install bathtub surround? Install a bathtub surround Costs. For your project in zip code 98104 with these options, the cost to install a bathtub surround starts at $933.63-$1,770.71 per surround. Your actual price will depend on job size, conditions, finish options you choose.

Moreover, how much does it cost to replace a tub and surround?

Cost to Install a Bathtub Surround

Item details Qty Low
Unused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. 0.0 h $0
Totals - Cost To Install Bathtub Surround 1 EA $807
Average Cost per Surround $806.57

How much tile is needed for a tub surround?

Measure the size of the tiles you want to use. A 3-by-3 inch tile is 9 square inches. Divide the area of the wall (2592 square inches) by the area of an individual tile (9 square inches) giving you the number of tiles required for that surface (288 tiles needed for the sample wall).

36 Related Question Answers Found

How much do tilers charge per hour?

How Much Do Tilers Charge per Hour? Tilers charge $45 to $60 per hour. However, the tiling hourly rates vary between $40 and $100, depending on whether the tiling is required indoors or outdoors.

What is the best material for a bathtub surround?

Bathtub surrounds are made of different man-made plastic composites. They can be cast or compression molded. Swanstone is a good example of a solid surface surround. Solid surface also includes engineered stones which are marble, granite, or quartz chips mixed with a resin (glue).

How long does it take to tile a bathtub surround?

Just the walls--2 days to tile 4 or 5 hours to grout.

Does Home Depot install bathtubs?

Home Depot can help ease accessibility in your bathroom by replacing your existing tub or shower with a walk-in tub. From in-home consultation to product selection to professional installation, we're with you every step of the way. Plus, you can rest easy knowing the installation is backed by a 1-year labor warranty.

How many square feet is a tub surround?

How many square feet is a standard tub surround? Your average bath surround will measure in around 1,920 square feet. This number will generally differ depending on the size of your bathtub and the space you have available in your bathroom.

How much does it cost to tile a 12x12 room?

Tile Installation Costs Per Square Foot
Item Per Square Foot
Tile $0.50-$15 indoor $1-$35 outdoor
Labor $4-$32
Other Materials $6-$9
Removal of Old Surface $2

How much should a small bathroom remodel cost?

The national average to remodel a small bathroom is typically $6,500, but it can range anywhere from $1,500 up to $15,000 or more. For a complete remodel, you will likely pay $70/sq. ft. for low-end fixtures with DIY labor, and up to $250/sq.

How long does it take to remodel a bathroom?

On average, a small complete bathroom remodel can be done in about 23 days under ideal circumstances. Assuming no work is done on weekends, this translates to about 4 1/2 weeks—slightly more than one month—if the work proceeds uniformly with no breaks.

Is it cheaper to install a shower or tub?

Tubs are often cheaper to install.
A tub will cost anywhere from $400 to $8,000, installed, whereas a shower ranges from $450 to $10,000. Standard bathtubs and shower stalls are at the low end, while whirlpool tubs and walk-in showers are pricier.

How do you replace a tub surround?

Install the large panel to the back wall of the tub first.
  1. Make a cardboard template. You'll need a template of the plumbing-end wall to locate the showerhead, tub spout and faucet.
  2. Apply Silicone Adhesive.
  3. Press Panel to the Wall.
  4. Drill Pilot Holes.
  5. Test Fit the End Panel.
  6. Apply Molding.
  7. Install Corner Trim.

How do you replace a shower tub combo?

Step 1: Demo the Old Tub Shower Combo
  1. And the shower head and tub spout.
  2. Then use a reciprocating saw to cut the fiberglass at each corner in the tub surround.
  3. This makes it easy to remove the plumbing wall, back wall and main wall.
  4. You'll have to disconnect all the pipes from the tub and then you can remove it as well.

How much does it cost to remove a bathtub and install a shower?

If you're replacing a tub with a tub or a shower with a shower and aren't adding new features, the typical cost is about $3,000 to $5,000.

Can you replace a bathtub without re tiling?

is possible but you would need to be very careful. You would need to break the silicone seal between the tiles and the bath, using a stanley knife of similar, and then ease the bath out very slowly.

How much does a bath wrap cost?

National statistics show that average costs for the liner itself (not including wall surround panels) range from $700 to $1400, but with with professional installation the costs of a tub liner with wall panels can go into the range of $4,000 to $7,000.

How do you install a tub surround?

  1. Lay a bead of caulk along the bottom edge of the back wall near the tub base.
  2. Apply the tub surround adhesive to the back wall, and use a trowel to spread it over the entire surface where the panel will go.

Is it worth it to refinish a bathtub?

If your existing bathtub is already in pretty good shape but is covered in minor stains, scratches or other surface imperfections, reglazing is a good option. It's also ideal for certain types bathtubs. Acrylic bathtubs can also be reglazed, as long as they don't have any significant issues.