How much does a treated 2x6x8 weight?

Kiln Dried Lumber Boards

Weight (lb)
Nominal Dimension (in x in)	Length (ft)
2 x 8	21	32
2 x 10	27	40
2 x 12	32	48

Also question is, how much does a treated 2x4x8 weigh?

A kiln dried 2x4x8 weighs in on the lighter end at around 9 lbs while the pressure treated 2×4 weighs in closer to the 17 lb range.

Similarly, how much does treated wood weigh? Treated Wood A 12-foot length of treated, yellow pine 5/4-by-6 decking will weigh an average of 13.87 pounds (within a range of 10.65 to 17.08 pounds). If not fully dry, treated wood can contain up to 4.5 gallons of water, adding as much as 17.4 pounds to the weight of the 12-foot board.

In this way, how much does a treated 4x6x16 weigh?

A dry, treated, 4x4 x 12' weighs just about 30 lbs (I have had occasion to weigh several). A wet (soggy) one can hit 40+ lbs, easy. 4x6 x 8' = 4x4 x 12' , so your 4x6 should weigh just about the same. Southern Yellow Pine weighs in at a little over 40 pounds per cubic foot.

How much does a pressure treated 6x6 weigh?

Weight of Pressure-Treated Lumber (Southern Yellow Pine, Longleaf)
4 x 16	3.5 x 15.25	15.35
6 x 6	5.5 x 5.5	8.69
6 x 8	5.5 x 7.25	11.46
6 x 10	5.5 x 9.25	14.62

39 Related Question Answers Found

How much weight can a 2x6x16 support?

The type of load in question will also determine how much weight a 2x6 can hold on edge. For example, a 2x4 lumber may hold a 4-cylinder engine comfortably but may not hold a bigger one. On the other end, a 2x6 can support a V8 engine of between 600 – 700 lbs.

How much does a 2 by 4 weigh?

The weight of a 2-inch by 4-inch lumber board depends on its length and the type of wood from which it is made. A green-lumber 2-by-4 with a length of 8 feet weighs 13 pounds. A green-lumber 2-by-4 with a length of 12 feet weighs 20 pounds. A pressure-treated 2-by-4 that is 8 feet long weighs 17 pounds.

How heavy is a 4x4?

Chart of Average Vehicle Curb Weight by Class

Vehicle Class	Curb Weight in Pounds	Curb Weight in Kilograms
Large car	3,882 pounds	1,760 kilograms
Compact truck or SUV	3,590 pounds	1,628 kilograms
Midsize truck or SUV	4,404 pounds	1,997 kilograms
Large truck or SUV	5,603 pounds	2,541 kilograms

How much weight can a 2x12 support horizontally?

One 2x12 can support about 180 lbs. per foot or about 2,100 lbs.

How heavy is a 6x6x12?

MicroPro technology offers many benefits including significantly improved corrosion performance. Product Length: 12', Product Weight : 144 lbs.

How much does a 2x4 weigh per foot?

Nominal Dimensions of Lumber	Actual Dimensions of Lumber	Air Dried Lumber Weight (12% Moisture Content) Southern Yellow Pine (Longleaf)
In Inches	In Inches	41 pounds per cubic foot
1 x 2	0.75 x 1.5	0.32 lbs per linear foot
1 x 3	0.75 x 2.5	0.53
1 x 4	0.75 x 3.5	0.75

How much weight can a 2x10 beam hold?

1,200 lbs.

How much do LVLS weigh?

Your 5.25x14x15' lvl beam will weigh 15x21 = 315lbs.

How heavy is a 6x6x16?

Re: Weight Of PT Wood

Dang Rowdy, if that's right then a 6x6x16' is going to be about 350lbs.

How much weight can a 6x6 support horizontally?

If you assume a conservative 1400psi allowable bending stress, a single 6x6 with 12' span can support about 2000 lbs. So your double 6x6 can support at least 4000 lbs (possibly more if you do a good job bonding the two members together so that there's no slip between the faces).

How much does a 16 foot 2x4 weigh?

x 16 ft.; Actual: 1.5 in. x 3.5 in. x 192 in. Weighs approximately 18 lbs.

How much does 3/4 pressure treated plywood weigh?

In it, they state that softwood plywood should weigh approximately 3 pounds per square foot, per inch of thickness. Actual plywood weight is slightly less, as the specification is for pre-sanded sheets.

Softwood Plywood weight chart:

Thickness	Actual Weight
5/8”	48 lbs
3/4”	60.8 lbs
1-1/8”	84.5 lbs