How do you replace a Kohler kitchen faucet cartridge?

Asked By: Nadezhda Pocovi | Last Updated: 24th April, 2020
Category: home and garden home appliances
4.9/5 (62 Views . 26 Votes)
Replace the Valve in a Single Handle Faucet
  1. Turn off the water to the faucet.
  2. Remove the plug button from the handle (Fig.
  3. Loosen the screw underneath the plug button to remove the handle (Fig.
  4. Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig.

Click to see full answer


Correspondingly, how do I know if my faucet cartridge is bad?

Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.

One may also ask, how do you remove a kitchen faucet handle without screws? Use an Allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet. The overall trick is how to remove tap handle without screw and find a good place to begin taking apart the faucet handle so you can get to where you need to be.

Herein, how do you remove an old Kohler kitchen faucet?

To remove a Kohler kitchen faucet completely, you'll need to disconnect the supply lines (with the water off, of course). Use an adjustable wrench to unscrew these, and then reach under and behind the sink basins to feel for the screws that hold the faucet to the counter via a large washer.

What is a kitchen faucet cartridge?

The cartridge faucet is a special type of washerless fixture commonly used in kitchens and bathrooms, and it's designed so that the cartridge insert is easy to replace when the faucet begins to drip and leak.

34 Related Question Answers Found

Can a bad faucet cartridge cause low water pressure?

Unfortunately, water line breaks and routine repairs can cause low pressure. If that's not the problem, your kitchen faucet either has a clogged aerator on the faucet's tip or it has a clogged cartridge. Both are easy to repair, and you don't need any special plumbing skills.

Can you fix a faucet cartridge?

If you have a two-handle faucet with handles that turn 90 degrees, you have either a cartridge or compression faucet. Leaks in cartridge faucets are usually caused by worn-out cartridges or worn rubber O-ring seals. These problems are easily fixed using repair kits that include both replacement cartridges and O-rings.

Can you clean a faucet cartridge?

Place the plastic bowl upside down over the faucet hole to direct water spray towards the drain. Have your extra set of hands turn on the hot water supply under the sink while you hold a bowl. Let the water run for 3 or 4 seconds. This will flush out any debris trapped in the faucet or in the water line.

Do all faucets have cartridges?


The first three (ball, disc, and cartridge) are all types of "washerless faucets" since they do not use rubber or neoprene washers. The latter (compression) is very much like your basic washer faucet. Take a look at each type and gain an overview of how they work and how they're different.

How does a kitchen faucet cartridge work?

How Does a Cartridge Faucet Work? It's a simple faucet, but instead of having two separate taps or knobs for both hot and cold water, there's simply a lever above the spigot. Raising the lever turns the water on, while pushing it down turns the water off.

Why is the faucet so close to the back of the sink?

ELI5: Why are many bathroom sink faucets so close to the back of the sink? The reason is probably cost reduction. The faucet is most likely a casting. A shorter faucet means less metal and a lower cost.

How do you lubricate a faucet cartridge?

For one-handle faucets with a 1225 cartridge, simply remove the cartridge and lubricate it both inside and out with a silicone-based grease (Moen part number 99915). Do not use plumber's grade faucet grease, silicon sprays or any lubricant that may contain petroleum.

Are hot and cold faucet cartridges different?

Although Kohler ceramic valve cartridges are available in hot (which means the water turns off by turning the handle clockwise) and cold (the water turns off counterclockwise), the only difference between the two is the way the valves turn. This will allow the valve to turn in the other direction.

Where do I find my faucet model number?


The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N."

Why does my faucet handle turn all the way around?

The faucet known as the seat-washer is typically the most common, and can be discovered by turning your handle. If the handle turns all the way around, then it is a seat-washer stem faucet. Other types will only turn around one quarter of the circle.

How do you remove a Kohler Revival faucet handle?

Remove the Handles for the Revival Faucet
  1. Hold on to the handle while turning the handle base counterclockwise by hand or with a strap wrench, taking care to protect the finish.
  2. Remove any remaining components to expose the valve. Set all parts aside for re-use.
  3. The valve can now be replaced or other repairs made.
  4. Reassemble handle parts in reverse order.

How do you remove the handle on a Kohler bathroom faucet?

Remove the Handles for the Finial Bathroom or Kitchen Faucet
  1. Hold on to the handle while turning the handle base counterclockwise by hand or with a strap wrench, taking care to protect the finish.
  2. Remove any remaining components to expose the valve. Set all parts aside for re-use.
  3. The valve can now be replaced or other repairs made.
  4. Reassemble handle parts in reverse order.

How do you remove an American standard faucet handle?

  1. Turn off the water supply at the main shutoff valve, which is typically located at the water meter.
  2. Loosen the set screw from the faucet's handle.
  3. Remove the faucet's handle by pulling the handle up.
  4. Remove the faucet cap with channel-lock pliers.