How do you remove an empty cartridge from a grease gun?

To remove the cartridge, you'll basically just unscrew the cap that the cartridge is in by turning it clockwise while turning the dispenser nozzle counterclockwise. It might be screwed on kind of tight, so use some elbow grease. Pull back on the metal handle.

Beside this, how do you load and unload a grease gun?

How to Load a Grease Gun

The head needs to be packed with grease.
The plunger is usually dry in a new grease gun.
Remove both ends of the grease cartridge.
With the t-handle out, place the cartridge into the barrel.
Screw the barrel into the head of the gun.
Push the t-handle right down into the barrel.
Take out any possible air pockets.

Secondly, does Walmart sell grease guns? Lumax LX-1152 Black Heavy Duty Deluxe Pistol Grease Gun with 18" Flex Hose - Walmart.com.

Consequently, how do you know when a grease gun is empty?

Just pull out on the spring/charge handle. It will pull easy until you hit the face that is pushing on the grease. The amount the handle that sticks out, is what is left in the grease gun.

What's the best grease gun?

The Best Grease Gun

DEWALT DCGG571m1 Lithium Ion Grease Gun.
Lincoln 1162 Air Operate Grease Gun.
Lumax LX-1152 Black Heavy Duty Deluxe Pistol Grease Gun.
GreaseTek Premium Pistol Grip Grease Gun.
Workforce Mini Grease Gun L1305.
DEWALT DCGG570B 18V Cordless Grease Gun.
Lincoln Lubrication 18 Volt Cordless Grease Gun.

31 Related Question Answers Found

How do you keep a grease gun clean?

10 Tips for Maintaining Grease Guns and Fittings. Use grease gun nozzle caps to help keep contamination out. Wipe fitting before use to clear debris. Use clean shop rag or lint free cloth to clear debris.

Why does my grease gun not work?

Issue: The grease gun won't pump grease.

The most common cause is an air lock. This can be fixed by continuously pumping to see if the air will pump out. Secondly by unscrewing the barrel one turn and continuously pumping, then tightening the barrel when the grease pumps.

How do you store a grease gun?

Cartridge tubes of grease should be stored upright at all times. If a cartridge tube is left in a grease gun, the grease gun should be depressurized, wiped with a clean cloth to remove any contaminants and stored in a horizontal position inside a clean, cool, dry area to keep the oil from bleeding out of the grease.

How do grease guns work?

The lever is used in manual configurations of the grease gun for hand-pumping the grease from the barrel to the hose or tube. The air-release nipple allows air to escape after new grease has been added to the grease gun and pumped into the head. The spring provides the pressure onto the plunger.

What is the best grease for ball joints?

5 Best Grease for Ball Joints:

Lucas Oil 10301 Heavy Duty Grease, 14.5 oz.: Best o the best:
Lubrimatic 11404 Marine Wheel Bearing Grease: Editors Top Choice:
Valvoline SynPower Automotive Wheel Bearing Grease: The cheapest one:
Timken GR224C Wheel Bearing Grease: Significantly great for versatility:

How do you use a Zerk grease gun?

How to Use a Grease Gun Zerk Fitting

Purchase a grease gun with a zerk fitting on the end of it.
Press the end of the grease gun on the end of the zerk fitting.
Pump the grease gun.
Stop pumping when you see grease squeeze out the edges of the ball joint.
Pull the grease gun off of the ball joint and repeat this process until all ball joints are greased.

Is the m3 grease gun still used?

By many accounts, the M3 was still in use by the 1990s. Unlike many of its contemporary weapons, the Grease Gun did not have adjustable sights and was mainly intended for tank crews to use in close quarters so they could get back in the tank and continue firing the big gun.

How many tubes of grease are in a case?

10 Tubes

What is a grease gun used for?

A grease gun is a common workshop and garage tool used for lubrication. The purpose of the grease gun is to apply lubricant through an aperture to a specific point, usually on a grease fitting or 'nipple'. The channels behind the grease nipple lead to where the lubrication is needed.

Why is it called a grease gun?

Arsenal | M-3A1 Grease Gun. Commonly known as the “Grease Gun” because of its similarity in appearance to the mechanic's tool of the same name, the M-3 submachine gun was the simplest firearm issued to U.S. combat troops in the 20th century.

Do grease guns come in different sizes?

There are Metric grease zerks. Seems they come in sizes like M6, M8 and M10.

How many cc's are in a pump of grease gun?

The G. Gun grease gun dispenses a theoretical 3cc per stroke. Our tests confirm the actual volume dispensed is 2.7cc/stroke.

How much grease is in a pump?

Grease guns vary in the amount of grease pumped per stroke, from one to three grams of grease or higher. The actual output can vary depending on the age of the grease gun.

How often should you grease your truck?

A: It's extremely important. Grease is one of the least expensive investments you can make to protect your equipment. A $3 tube of grease every 12,000 miles is a small investment to protect your equipment.

What is a Zerk fitting?

A grease fitting, grease nipple, Zerk fitting, or Alemite fitting is a metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, into a bearing under moderate to high pressure using a grease gun.