How do you measure the volume of a bathtub?

Multiply the width by the length. Multiply the result by the depth. Divide the result by 1,728 for the number of cubic feet of water the tub will hold. Multiply that result by 7.5 for the number of gallons of water held in the tub.

In respect to this, how do you calculate the volume of a bathtub?

Calculate the volume of a rectangular or square tub as the length multiplied by the width, multiplied by the depth and finally multiplied by 7.5 to equal the volume in gallons. Length times width gives the surface area of the pool in square feet. Multiplying that by the depth gives the volume in cubic feet.

Also Know, how can you measure volume? Units of Measure

Volume = length x width x height.
You only need to know one side to figure out the volume of a cube.
The units of measure for volume are cubic units.
Volume is in three-dimensions.
You can multiply the sides in any order.
Which side you call length, width, or height doesn't matter.

Moreover, what is the volume of an average bathtub?

Standard Tub Capacity The capacity of a standard tub is directly related to its size. According to Alliance For Water Efficiency, a standard non-jetted bathtub holds between 25 and 45 gallons of water approximately. The average rectangular bathtub is about 30 inches wide and 5 feet long, according to Plumbing-Basics.

How many cubic meters is a bathtub of water?

0.160 cubic meters

35 Related Question Answers Found

How is tank capacity measured?

To work out water tank capacity for a horizontal cylinder tank, measure the radius of the bottom of the cylinder and find the area of the circle. Next, multiply the area by the tank's length to determine the tank's total volume.

How do I calculate tank capacity?

Multiply this number by the height to determine the cubic volume in inches. For example, if you have a tank that is 12 inches in diameter and 20 inches high, the calculation looks like this: Divide the cubic volume in inches by 231 in order to find the number of gallons.

How many liters is a bathtub?

To start, the standard bathtub will hold roughly around 80 gallons (302 liters) of water. Much smaller bathtubs can only hold around 40 gallons (150 liters) of water, which typically are more suited for smaller children or function more as a shower space.

How many liters are in a volume?

You can use the conversion 1 liter = 1,000 cubic centimeters. To convert from liters to cubic centimeters, you would multiply by 1,000. For example, if a cube has a volume of 34 liters, to find the volume in cubic centimeters, multiply by 1,000: 34 x 1,000 = 34,000 cubic centimeters.

Whats is volume?

Volume is the quantity of three-dimensional space enclosed by a closed surface, for example, the space that a substance (solid, liquid, gas, or plasma) or shape occupies or contains. Volume is often quantified numerically using the SI derived unit, the cubic metre.

How do I calculate the volume of a pond?

How to Measure Your Pond

Square/ Rectangular (Gallons): Multiply length x width x average water depth (feet) x 7.5. Example: 8' x 4' x 2' x 7.5' = 480 gallons.
Square/Rectangular (Acres): Multiply length x width, then divide by 43,560 (square feet per acre)
Round (Gallons): Multiply diameter x itself x average water depth (feet) x 5.9.

How many cups are in a bathtub?

A standard bathtub will fit 80 gallons of water. 80 gallons = 1280 cups.

How do you find the volume of a container?

The volume of a container is the amount of space it encloses; or how much space is inside of it. For a box, the volume is determined simply by this formula: A box with height H, width W and length L, has volume V = L × W × H.

What uses more water a bath or shower?

According to the U.S. Environmental Protection Agency (EPA), a full bathtub requires about 70 gallons of water, while taking a five-minute shower uses 10 to 25 gallons. You might argue that very few people fill the tub to the top, but a simple calculation shows that either way, baths use more water.

How much does it cost to fill a bathtub?

The average American is about 75kg so they would displace roughly 75 liters or about 20 gallons. So you'd have to put about 40 gallons of water in a tub to fill it with a person. To heat 40 gallons of bath water would cost 40-80¢.

How much water does a 20 minute shower use?

Water used in a 20 minute shower depends on the shower head. If you are using a low flow showerhead, less water will be used, but the pressure will be less. If you use a rain type shower head, more water will be used. On an average, 5L of water is used per minute of shower.

How much water do you need for a bath?

The bath. A bath uses between 50 to 150 litres of water per fill, depending on the water level.

How much water is used in a bath?

50 gallons

How much does a full bathtub weigh?

Tub capacity ranges from 20 to 80 gallons per tub full. A 20-gallon tub weighs about 170 pounds full of water while the bigger tubs contain close to 650 lbs. of water. Along with the weight of the water, the cost of water and energy to heat the water should be considered.

How many Orbeez does it take to fill a bathtub?

bag will supply) and we get around 37. Meaning that you will need about 37 bags of orbeez to fill this pool to maximum fun potential. see less Approximately 59,733 orbeez.

How many gallons of water does it take to fill a walk in tub?

Most walk-in tubs hold between 40 and 80 gallons of water. A standard bathtub, by contrast, averages 25 to 45 gallons of water. When considering which bathtub model to purchase, be sure to understand your hot water heater's capacity as well.

How many people can fit in a bathtub?

The second way the term is used is for number of people. The typical bathtub has a capacity of one person (or perhaps a few more children if they are small and you have bubbles to entice them to take a bath!). A Double Slipper Bathtub has a capacity of two people normally.