How do I adjust my Krain Pro S?

Asked By: Ayob Olaechea | Last Updated: 8th May, 2020
Category: home and garden smart home
4.8/5 (25 Views . 31 Votes)
Insert the tip of the key in the top of the screw directly across from the left start arrow on the top of the sprinkler head. While holding the turret with one hand, turn the screw to the left to reduce spray arc or to the right to increase spray arc.

Click to see full answer

Also question is, how do you adjust a pro plus sprinkler head?

270 - M 90 Insert the K-Key or a smal flat blade screwdriver into the Arc Set Adjustment slot. Turn clockwise to increase the arc or counter-clockwise to decrease the arc. sprays should not be installed on the same watering zone. Unscrew the top and lift the complete sprinkler assembly out of the housing can.

Also Know, how do I adjust the flow on my sprinkler head? With a screwdriver, adjust the radius screw located on top of the sprinkler head. Turn the radius screw clockwise to lessen the water flow. Turning the radius screw of your sprinkler will introduce friction to your sprinkler nozzle and reduce the amount of water coming into your sprinkler system.

Thereof, what is K rain?

Since 1974 K-Rain has been a family owned and operated irrigation engineering and manufacturing company. With our full line of commercial, residential and institutional sprinkler systems, rotors, sprinklers, sprays, valves and irrigation controllers, K-Rain is continually focused on customer satisfaction. “

How do I adjust my mini pro sprinkler system?

Insert the K-Key or a small flat blade screwdriver into the Arc Set Adjustment slot. Turn clockwise to increase the arc or counter-clockwise to decrease the arc. NOTE: The arc set arrow in the center of the nozzle turret rotates to show the current setting.

21 Related Question Answers Found

How do you adjust a Xbox 360 sprinkler?

To increase the arc of your Hunter rotor head, you'll want to insert the plastic key into the adjustment socket, which can be found on the top of each sprinkler head. Turn the adjustment wrench clockwise in a full 360-degree motion. This will increase your arc by 90 degrees each time you turn the wrench a full circle.

How do you adjust Rainbird sprinklers?

To adjust your Rainbird sprinklers, twist the spray head to the right or left if you want to change the water's direction. To reduce the spray distance, use a flat-bladed screwdriver to turn the screw on the nozzle clockwise.

Why is my sprinkler not rotating?

Age, excessive pressure, or poor water quality may eventually allow particles of contamination to enter the gear drive. If the sprinkler is no longer rotating and the water flow coming out of the sprinkler has decreased, you can first try cleaning out the filter by removing the pop-up assembly from the main body.

Why do sprinkler heads stop rotating?

Damaged Internal Components
These gears must be lubricated to move freely. In most cases, water is the lubricant. But some sprinkler heads contain a small amount of oil inside that lubricates the gears. If the oil dries out or leaks, it can cause damage to the internal gears, and the rotating motion will stop working.

How do you fix a sprinkler head that won't rotate?

How to Do It
  1. Disassemble the sprinkler head.
  2. Take off the filter at the bottom of the head.
  3. Rinse the filter in a bucket filled with clean water to wash out debris.
  4. If this doesn't work you'll need to have the sprinkler head replaced.
  5. If it does work, make sure the head is properly adjusted when you re-install it.

What is a pop up sprinkler?

Pop-up Spray and Rotor Heads
Designed to supply a continuous stream of water, pop-up spray sprinkler heads use a variety of nozzle patterns to distribute the stream of water to suit the contours of your landscape. This type of nozzle reduces precipitation rates, which improves soil infiltration and reduces runoff.

How do you change the spray pattern on a sprinkler head?

Gear-Driven Pop-Ups
Turn off the water, lift the gear-driven pop-up sprinkler out of the ground and rotate the head clockwise as far as it will go. Turn the adjustment screw on the sprinkler head counterclockwise as far as it will go with a flat-head screwdriver. This zeros the spray pattern.