What is AdvanTech plywood?

With an industry-leading warranty and unmatched 500-day no-sanding guarantee, AdvanTech flooring is the flooring panel that more builders trust. It's engineered for superior strength, moisture resistance and quality so you can build the quiet, stiff floor your homeowners demand.

In this regard, is AdvanTech flooring waterproof?

AdvanTech flooring is a water resistant, dimensionally stable engineered strand product that was designed to withstand exposure to moisture during normal construction delays. In some areas, frequent and lengthy rain storms result in standing water on the floor systems of buildings under construction.

Similarly, what thickness does AdvanTech come in? AdvanTech sheathing panels are offered in three thicknesses (1/2", 5/8", 23/32") for a wide range of conditions. All panels are available in nominal 4 by 8 foot sheets†† with square edge profiles, and a tongue and groove edge profile is also available in the 5/8" thickness.

In respect to this, what is AdvanTech flooring made of?

AdvanTech Flooring and Sheathing panels are bonded with an advanced resin technology system. Wood strands are mixed with resin and wax and pressed under heat to produce the most stable engineered panel product available in the industry today.

What does AdvanTech plywood weigh?

AdvanTech Flooring Panels Thickness, Span Rating, Panel Weight, Panel Units by Mill Location
Panel Thickness	Approx Wt./Panel
19/32" 23/32" 7/8" 1" 1-1/8"	68 lbs 78 lbs 94 lbs 110 lbs 124 lbs

26 Related Question Answers Found

What is the best material for a subfloor?

Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.

Is it OK if OSB gets wet?

This is not to say that OSB has no problem whatsoever when exposed to excessive moisture. OSB's other moisture challenge has to do with dimensional stability - in other words, OSB can irreversibly swell, especially at the edges, when it gets too wet.

How thick should a subfloor be?

Typically made of plywood or OSB and ranging in thickness from 19/32" to 1 1/8" thick, the subfloor is truly structural, second only to joists in this respect. Subfloor holds up all of the above layers of flooring, as well as everything in your house—people, dogs, cats, pianos, furniture. All houses have subfloors.

How much does a 4x8 sheet of AdvanTech weigh?

AdvanTech Sheathing Mill Specifications (4' x 8' sheet)1, 2

Easton, ME 1/2 5/8 52 lbs. 64 lbs.

What is the best water resistant plywood?

While marine plywood is recommended for any plywood application where the timber will be directly immersed in water for a period of time as in boat building and other marine activities, MAXI Plywood advises that birch plywood offers a more functional alternative for design applications requiring general moisture

Can Plywood be waterproofed?

Plywood is a laminated material that accepts waterproofing easily. When plywood is used in any capacity outdoors, waterproofing prolongs its life. Since plywood is made by gluing layers of wood together and finishing it with a veneer, the layers are vulnerable to water damage.

What type of plywood is best for outdoor use?

Oriented strand board (OSB) is an engineered plywood substitute that many builders use for sheathing and roof decking. It's constructed with waterproof glue and performs best when only semi-exposed to the elements, as it is when covered with siding or roofing.

Is Advantech a OSB?

Advantech is still an OSB subfloor and is NOT recommended for use as a single layer solution under a tile installation according to Huber (Advantech's Company) or the TCNA.

Is OSB water resistant?

OSB is strong and water-resistant.

Every single fiber or piece of wood in an OSB is saturated with a cocktail of resins designed to provide superior strength and waterproofing to the finished product. This type of board is an excellent material for use in waterproofing systems, be they roof, sub-floor or wall.

Can you paint AdvanTech?

Can I paint AdvanTech panels? AdvanTech panels can be left natural, stained, varnished or painted with oil or epoxy based paints or oil based primer and latex paint. Water seal is not recommended. AdvanTech panels are not recommended for exterior siding or other applications that are permanently exposed to the weather.

What is sheathing for?

Sheathing is the board or panel material used in floor, wall and roof assemblies of both residential and commercial construction. The most basic function of sheathing, in any application, is to form a surface onto which other materials can be applied.

How long can zip system be exposed?

According to Huber, the tape can be applied to surfaces as cold as 20°F as long as they're dry to the touch and frost-free. The manufacturer warrants that taped and installed Zip panels can be left exposed to the weather and UV rays for up to 120 days.

Can I use OSB for flooring?

When used as flooring sub-floor or underlayment, OSB runs neck-and-neck with plywood, according to the opinion of contractors, tradespeople, and other industry influencers. Installers find OSB slightly more difficult to work with than plywood since OSB is heavier and more prone to breakage than plywood.

How much is tongue and groove plywood?

Tongue & Groove Subfloor Panels

Everyday Low Price	$54.99
11% Mail-In Rebate Good Through 2/29/20	$6.05

How much does a 3/4 sheet of AdvanTech weigh?

Panels per Unit

23/32” 4' x 8' 24 oc ESR-1785 T & G 78 lbs 45 pcs.

What kind of wood is CDX plywood?

CDX is a type of plywood. Basically, plywoods are thin veneer sheets that are glued and held together with linking plies. Plywoods are known for their strong resistance to cracking, breaking, or twisting. There are different grades/classes of plywood which are represented by letters A, B, C and D.

How many sheets of 3/4 plywood are in a lift?

1./2" = 60 sheets = 2,400 (40 lbs) 5/8" = 50 sheets = 2,400 (48 lbs) 3/4" = 40 sheets = 2,400 (60 lbs)