How is AdvanTech made?

Asked By: Elinor Tokin | Last Updated: 24th April, 2020
Category: home and garden indoor environmental quality
4.5/5 (366 Views . 29 Votes)
How are AdvanTech panels made? AdvanTech Flooring and Sheathing panels are bonded with an advanced resin technology system. Wood strands are mixed with resin and wax and pressed under heat to produce the most stable engineered panel product available in the industry today.

Click to see full answer

In this regard, is AdvanTech flooring waterproof?

AdvanTech flooring is a water resistant, dimensionally stable engineered strand product that was designed to withstand exposure to moisture during normal construction delays. In some areas, frequent and lengthy rain storms result in standing water on the floor systems of buildings under construction.

Additionally, what is AdvanTech subfloor? A Lot is Riding On Your Subfloor. Build with AdvanTech® flooring for award-winning performance you can rely on. Specifically engineered to combine industry-leading strength, superior moisture resistance and installation ease, AdvanTech flooring is the FLAT OUT BEST for a quiet, stiff floor.

In this way, is AdvanTech a OSB?

Advantech is still an OSB subfloor and is NOT recommended for use as a single layer solution under a tile installation according to Huber (Advantech's Company) or the TCNA.

Is it OK if OSB gets wet?

This is not to say that OSB has no problem whatsoever when exposed to excessive moisture. OSB's other moisture challenge has to do with dimensional stability - in other words, OSB can irreversibly swell, especially at the edges, when it gets too wet.

32 Related Question Answers Found

What is AdvanTech made of?

How are AdvanTech panels made? AdvanTech Flooring and Sheathing panels are bonded with an advanced resin technology system. Wood strands are mixed with resin and wax and pressed under heat to produce the most stable engineered panel product available in the industry today.

What is the best material for a subfloor?

Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.

How much does a 4x8 sheet of AdvanTech weigh?

AdvanTech Sheathing Mill Specifications (4' x 8' sheet)1, 2
Easton, ME 1/2 5/8 52 lbs. 64 lbs.

How thick is AdvanTech flooring?

AdvanTech sheathing panels are offered in three thicknesses (1/2", 5/8", 23/32") for a wide range of conditions. All panels are available in nominal 4 by 8 foot sheets†† with square edge profiles, and a tongue and groove edge profile is also available in the 5/8" thickness.

Where is AdvanTech manufactured?

Manufacturing. Advantech complements its design strengths with three world-class production centers in China and Taiwan that are fully capable of meeting all your manufacturing needs.

Can you paint AdvanTech flooring?

AdvanTech panels can be left natural, stained, varnished or painted with oil or epoxy based paints or oil based primer and latex paint. Water seal is not recommended. AdvanTech panels are not recommended for exterior siding or other applications that are permanently exposed to the weather.

How thick should a subfloor be?

Typically made of plywood or OSB and ranging in thickness from 19/32" to 1 1/8" thick, the subfloor is truly structural, second only to joists in this respect. Subfloor holds up all of the above layers of flooring, as well as everything in your house—people, dogs, cats, pianos, furniture. All houses have subfloors.

Do you nail or screw subfloor?

When you use a nail gun to attach subfloor sheathing to the floor joists, the nail sometimes misses the joist. Remember, nails can pull up; screws don't. This gives us stronger floors that will not move or squeak.

Which is better OSB or plywood for flooring?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn't have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Can you use OSB as a subfloor?

When used as flooring sub-floor or underlayment, OSB runs neck-and-neck with plywood, according to the opinion of contractors, tradespeople, and other industry influencers. Installers find OSB slightly more difficult to work with than plywood since OSB is heavier and more prone to breakage than plywood.

Which is stronger plywood or OSB?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.

What does OSB stand for in lumber?

Oriented strand board

How do you protect OSB from rain?

Soak the tip of your paintbrush in your sealer and begin brushing it over the surface and on the ends of the OSB pieces. Make sure you repeat this process on each side, not just where your cuts were made. Coat the pieces as they lay on the tarp, and then let the waterproofing sit to dry for 12 to 14 hours.

How do you seal OSB edges?

  1. Use a measuring tape to mark off the needed length and width of OSB. Cut the wood using a circular saw.
  2. Mix a can of exterior waterproof paint using a stir stick. Use a small paintbrush to coat all newly cut edges.
  3. Allow the paint two hours to dry.
  4. Give the wood an additional two hours of drying time.

How do I protect my OSB board?

If you want to use OSB to sheathe the walls of your shed, you need to build those walls like the walls of a house: with a weather-resistant barrier like Tyvek over the OSB, and then cover that with siding of some sort. Vinyl siding is cheap and DIY-friendly.

What is best plywood for subfloor?

While OSB is the most popular structural panel, CDX plywood is the most popular type of traditional or "veneer" plywood. CDX plywood is like other laminate plywoods, but the outer layers of laminate are grades "C" and "D," which means they are cosmetically rough and contain many imperfections, thus lowering their cost.

What does AdvanTech plywood weigh?

AdvanTech Flooring Panels Thickness, Span Rating, Panel Weight, Panel Units by Mill Location
Panel Thickness Approx Wt./Panel
19/32" 23/32" 7/8" 1" 1-1/8" 68 lbs 78 lbs 94 lbs 110 lbs 124 lbs