Is AdvanTech waterproof?

Asked By: Monina Balbino | Last Updated: 11th January, 2020
Category: home and garden indoor environmental quality
4.6/5 (446 Views . 37 Votes)
Rest assured, AdvanTech® flooring's moisture resistance helps prevent headaches such as warping, swelling and delamination – leaving your finished floors smooth, flat and quiet.

Click to see full answer


Besides, is AdvanTech subfloor waterproof?

With AdvanTech, puddles are not a problem. AdvanTech flooring is a water resistant, dimensionally stable engineered strand product that was designed to withstand exposure to moisture during normal construction delays. The floor deck should be dry prior to installation of finish floor coverings.

Subsequently, question is, what is AdvanTech flooring made of? AdvanTech Flooring and Sheathing panels are bonded with an advanced resin technology system. Wood strands are mixed with resin and wax and pressed under heat to produce the most stable engineered panel product available in the industry today.

Also to know, what is AdvanTech plywood?

With an industry-leading warranty and unmatched 500-day no-sanding guarantee, AdvanTech flooring is the flooring panel that more builders trust. It's engineered for superior strength, moisture resistance and quality so you can build the quiet, stiff floor your homeowners demand.

Are wafer boards waterproof?

It is a structural material made from rectangular wood flakes of controlled length and thickness bonded together with waterproof phenolic resin under extreme heat and pressure. The layers of flakes are not oriented, which makes it easier to manufacture. Waferboard is used as a material to build cheap furniture.

34 Related Question Answers Found

How do you waterproof a subfloor?

Apply a bead of the silicone caulk around the entire perimeter of the subfloor. Place the angled part of the nozzle flat against the crevice between the subfloor and the bottom of the wall and squeeze the trigger slowly. Move the caulk gun evenly along the crevice to apply a bead of caulk.

How thick is AdvanTech flooring?

AdvanTech sheathing panels are offered in three thicknesses (1/2", 5/8", 23/32") for a wide range of conditions. All panels are available in nominal 4 by 8 foot sheets†† with square edge profiles, and a tongue and groove edge profile is also available in the 5/8" thickness.

How long can zip system be exposed?

ZIP System Sheathing should not be used with adhesively-attached EFIS, but can be used with mechanically attached EIFS. Avoid exposing ZIP System Sheathing for more than 180 days.

Can AdvanTech be painted?

Can I paint AdvanTech panels? AdvanTech panels can be left natural, stained, varnished or painted with oil or epoxy based paints or oil based primer and latex paint. Water seal is not recommended. AdvanTech panels are not recommended for exterior siding or other applications that are permanently exposed to the weather.

What can I use for a subfloor?


Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.

Can Plywood be waterproofed?

Plywood is a laminated material that accepts waterproofing easily. When plywood is used in any capacity outdoors, waterproofing prolongs its life. Since plywood is made by gluing layers of wood together and finishing it with a veneer, the layers are vulnerable to water damage.

What is the best water resistant plywood?

While marine plywood is recommended for any plywood application where the timber will be directly immersed in water for a period of time as in boat building and other marine activities, MAXI Plywood advises that birch plywood offers a more functional alternative for design applications requiring general moisture

What is Dry Max flooring?

DryMax® High-Performance OSB is not only the most moisture-resistant OSB sub-floor Georgia-Pacific manufactures, it's also designed to help prevent costly and time-consuming joint sanding. No wonder DryMax® High-Performance OSB carries a 500-day no-sand warranty. It's performance you can count on – day in and day out.

How much does a 4x8 sheet of AdvanTech weigh?

AdvanTech Sheathing Mill Specifications (4' x 8' sheet)1, 2
Easton, ME 1/2 5/8 52 lbs. 64 lbs.

What does AdvanTech plywood weigh?


AdvanTech Flooring Panels Thickness, Span Rating, Panel Weight, Panel Units by Mill Location
Panel Thickness Approx Wt./Panel
19/32" 23/32" 7/8" 1" 1-1/8" 68 lbs 78 lbs 94 lbs 110 lbs 124 lbs

What is the best subfloor material?

Hardwood flooring: Plywood is the best subfloor for hardwood flooring installation. CDX plywood ranging from 1/2 to 3/4-inch-thick and rated A/C will serve well for any hardwood flooring installation. Tongue-and-groove plywood is available to reduce squeaks and help the subfloor fit together better.

What thickness plywood should I use for flooring?

The National Wood Flooring Association recommends a minimum plywood panel thickness of 7/8-inch for joist spans of 19.2 to 24 inches, and a minimum plywood panel thickness of 5/8-inch for joist spans of 16 inches or less.

What is better for subfloor OSB or plywood?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn't have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Which is stronger plywood or OSB?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.

How much does 3/4 plywood cost?


Cabinet Grade Plywood
Thickness Type Price
1/4" Oak Plywood $25.97
1/2" Oak Plywood $42.97
1/2" Birch (3 ply) $41.97
3/4" Birch (5 ply) $44.97

Where is Advantech manufactured?

Manufacturing. Advantech complements its design strengths with three world-class production centers in China and Taiwan that are fully capable of meeting all your manufacturing needs.

What does OSB stand for in lumber?

Oriented strand board