What is a passage lock?

Passage - This is a lockset which has no locking function at all. Used anywhere a locking function is not needed such as closets or entrances to rooms where privacy is not an issue. Full dummy - These sets are full-size door knobs or handlesets that have no mechanical latch mechanism.

Beside this, what is an entry lock?

ENTRY LOCK: A lock that locks and unlocks the outside lever with button/turn on the inside. The key on the outside will either retract the latch and/or unlock the outside. Inside is always free egress.

Furthermore, what is a storeroom lock? STOREROOM LOCKS are used when the outside. lever should remain locked at all times. A key is. used to retract the latchbolt and open the door; when the key is removed, the door is locked on.

In this regard, what is a passage set?

Definition of Passage Set in Construction A hardware set that allows the functioning of a bolt into a door strike, without the ability to lock the mechanism. Normally used in areas that do not require security or privacy.

Do passage door knobs lock?

They are lockable but do not have a keyed cylinder. They can be unlocked with a generic tool that is provided. 3) Passage Door Knobs - Hall and Closet or Passage knob sets do not lock. They are generally used on closets or other doors where a lock is not required.

39 Related Question Answers Found

What are different types of locks?

Although there are many types of locks, the four most common are padlocks, deadbolts, knob locks, and levers.

Padlocks.
Deadbolts.
Knob Locks.
Lever Handle Locks.
Cam Locks.
Rim/Mortise Locks.
Euro Profile Cylinders.
Wall Mounted Locks.

Do I need 2 locks on front door?

Yes and yes. It makes sense to have double locks especially if you live in a high or moderate- crime area. Many burglars break into houses either through the door or the window. Now assuming that your windows are locked and not easily accessible, the burglar will likely make a forced entry through the door.

What is the difference between a passage lock and a privacy lock?

Privacy - This is a lockset which can be locked by a button or turn-piece on the inside, but has no key function. Passage - This is a lockset which has no locking function at all. Used anywhere a locking function is not needed such as closets or entrances to rooms where privacy is not an issue.

What are the different types of door locks?

There are plenty of other door locks and many fall within the five categories of knobs, deadbolts, cam locks, padlocks and mortise locks. For example, lever handle door locks are used for inner doors and work much like knob locks.

What is the difference between mortise and cylindrical locks?

The most glaring difference between a mortise lock and a cylindrical lock is the fact that a mortise lock requires a pocket or an indention to be cut into the door at the specific spot where the lock is to be fitted.

What is the purpose of a door lock?

The obvious purpose of any lock is to keep unwanted people out, but the kind of lock you buy depends on where it's going in the house and your budget. Exterior doors. To be truly secure, any exterior door needs a dead bolt.

What does dummy lever mean?

Dummy knobs do not turn. They don't have locks, axles or latches. Dummy knobs are fake, fixed knobs used to open and close a door that doesn't have a traditional latch. Available in common designs including handlesets and levers, dummy knobs also are used to dress up inactive doors.

What does half dummy door knob mean?

Half dummy - Same as above but instead of a pair of knobs or levers, a single knob or. lever is provided. Generally used on linen closets and other closet applications where a. matching knob or lever is not needed on the inside of a door.

How does a door lock works?

A cylinder lock works using pins. The key (to match the particular lock) lifts the pins to the correct height to allow the latch (the part that protrudes into the door frame) to be pulled back against the spring allowing the door to open. Once the key is removed the spring will automatically push the latch back out.

How do you install a passage door knob?

Steps

Remove the old door knob, latch, and strike plate.
Install a latch plate on top of the latch.
Slide the latch inside the edge of the door.
Use a wooden block and a hammer to tap the latch into place.
Secure the latch into the door with 2 screws.

What is the difference between dummy and passage door knobs?

Passage - This function is used for doors where no locking is required. The knobs or levers freely operate the latch. Dummy - Used on fixed (non-operating) doors and sometimes on closet doors. Sold as a pair, these handles do not operate, they stay in a fixed position, no latch is provided or normally needed.

What is a door pull?

noun A handle used for opening or shutting a door.

What is a backset on a door?

The backset is the distance from the edge of the door to the center of the 2-1/8-inch bore hole. In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify.

What does non turning lock mean?

Knobs and levers for passage doors are non-locking—they do not have keyed cylinders or locking buttons. They provide unimpeded access to any room. Passage, hall, and closet knobs and levers are used on closets, laundry rooms, or other rooms that do not require a privacy lock.

What is the difference between a lock and a latch?

A latch fastens a door, gate or window in position but does not provide security. (See Wikipedia.) A lock prevents anyone without a key from opening a door/gate/etc. A latch keeps something closed but does not lock it.

What is an auxiliary latch?

A supplementary latch in a lock which automatically deadlocks the main latch bolt when the door is closed. Also known as auxiliary latch bolt; deadlocking latch bolt; trigger bolt.

How does a privacy handle work?

Privacy door handles are a one piece backplate handle with a thumbturn knob (not shown) and spindle that turns a special lever inside the handle, which in turn holds the lever in a locked rigid position. There is no special lock needed inside the door as the handle lever locks when the thumbturn is turned.