What does Dante stand for in audio?

Dante. Dante stands for “Digital Audio Network Through Ethernet” and describes a combination of software, hardware and network protocols designed by Audinate in Australia.

Similarly, it is asked, what does Dante audio mean?

Digital audio network through

Secondly, what is Dante Via? Dante Via is easy-to-use software that delivers unprecedented multi-channel routing of computer-based audio, allowing a wide range of applications and devices to be networked and interconnected, easily and inexpensively.

In respect to this, how does Dante audio work?

In a Dante-enabled device, the hardware takes digital audio and 'packetizes' it. Basically, it segments the audio and wraps it in IP (Internet Protocol) packets suitable for transmission across an Ethernet network.

What is the difference between aes67 and Dante?

The biggest differences between these two systems are that Dante is proprietary and operates on layer 3 of the OSI 7 layer model. AVB is an open set of standards and it operates on Layer 2. While AVB is a fantastic technology, it is broad in scope and its future definitely lies in more areas than just pro audio.

31 Related Question Answers Found

Is Dante multicast?

Dante configures routing with unicast by default, and multicast will not be required for most of small-to-mid scale Dante systems. To understand when the multicast settings of a switch need to be configured, it's first necessary to understand multicast and "flows".

Does Ethernet carry audio?

In audio and broadcast engineering, Audio over Ethernet (sometimes AoE—not to be confused with ATA over Ethernet) is the use of an Ethernet-based network to distribute real-time digital audio. Because of the fidelity and latency constraints, AoE systems generally do not utilize audio data compression.

Does Dante require special network cabling?

Does Dante require any special network infrastructure? No, special network infrastructure is not required. Since Dante is based upon universally accepted networking standards, Dante-enabled devices can be connected using inexpensive off-the-shelf Ethernet switches and cabling.

How do I setup a Dante network?

Simply connect your Dante-enabled devices to an Ethernet switch, using CAT5e or CAT6 Ethernet cable, then connect your computer to the same switch. If you have only one Dante- enabled device to connect to your computer, you can eliminate the switch and simply connect the two with a CAT5e or CAT6 Ethernet cable.

What is Madi used for?

MADI is a digital audio routing technology that sends literally dozens of audio feeds through one cable. Used by professionals in the studio industry, MADI technology allows the transmission of 56 or 64 channels of digital audio data at up to 48kHz, or 28 to 32 channels of digital audio data at up to 96kHz.

How many channels can Dante support?

How many channels does Dante Via support? Dante Via supports up to 16 x 16 channels with CoreAudio and ASIO, and 2 x 2 channels with WDM applications.

What ports does Dante use?

Internal

Protocol	Port	Usage
UDP	8001	Dante Millau Device Proxy (Internal only)
UDP	8002	Dante Lock Server
UDP	8751	Dante Controller metering port (From FPGA based devices)
UDP	8800	Control & Monitoring (Excluding DVS-4.0 and Via)

Do Dante devices require special IP configuration?

However, by default, Dante devices obtain IP addresses automatically – so there should be no need to specify static IP addresses, unless it is a specific requirement for your network.

What protocol does Dante use to assign IP addresses to devices?

DHCP server

Does Dante support MIDI?

Dante Controller is not required to be present for a Dante network to work. Dante only transports audio data, and does not interfere with MIDI. The names of devices and channels in Dante are: User-definable and remembered by devices.

How do I get Dante certified?

Dante Certification Level 1 - Introduction to Dante

To get certified for Level 1, you must complete the Level 1 course & exam at audinate.com/certify, which includes a one-hour video course. (Note: If you attend an in-person Level 1 Dante training course, you may skip to the exam.)

What does the Dante clock master do?

Dante clocking guarantees that all devices are synchronized to within 1 microsecond or less, and that all devices can play out audio at the level of sample accuracy.

How are device names used in Dante?

In Dante, devices and audio channels are identified by names and labels, not 'magic numbers'. Dante routing is performed using the device names and channel labels. A receive channel can be subscribed to the name of a transmit channel at a device.

What do you mean by Ethernet?

Ethernet is a way of connecting computers together in a local area network or LAN. It has been the most widely used method of linking computers together in LANs since the 1990s. The basic idea of its design is that multiple computers have access to it and can send data at any time.

What is aes50?

AES50 is an Audio Engineering Society open standard defining the bidirectional. transmission of multichannel digital audio over 100 Mbit/s CAT 5/5e cable. AES50-2005. AES standard for digital audio engineering – High resolution multi-channel audio interconnection (HRMAI).

What is Dante Controller?

Dante Controller is a free application that may be downloaded from our website (include URL). Dante Controller allows you to see and make connections between Dante-enabled devices on your network.

What does Dante mean?

Dante's origin is Latin, and its use, English, German, and Italian. The name means 'enduring, steadfast'. The name is known from the Italian poet Dante Alighieri (1265-1321) who wrote The Divine Comedy, as well as the medieval text The New Life (1295) to express his lifelong love for Beatrice.