Which color cord is audio?

Category: home and garden home entertaining
4.2/5 (645 Views . 32 Votes)
They are often color-coded, yellow for composite video, red for the right audio channel, and white or black for the left channel of stereo audio. This trio (or pair) of jacks can often be found on the back of audio and video equipment.



Besides, what are the 3 color cords called?

The most common type of video cable is called composite video. Component video cables consist of three RCA connectors colored red, green and blue. With component video, not only is color separated from picture, but the color portion is split into two separate signals [source: Miller].

Secondly, can I use RGB cable for audio? An RGB cable refers to 'red, blue, green' the components of a video signal. They typically use the 'RCA' type cable ends. An “RCA” cable refers to the type of the connector. A typical RCA connector on a cable can be used to transmit audio or video.

Besides, what are red white yellow cables called?

It's called an RCA connector. The yellow cable is for composite video, and the the red and white cables are for stereo audio.

Is there a difference between audio and video RCA cables?

the only difference is the color. It's all just a cable so you're not going to hurt anything, Coax cables, which have RCA connectors, are different in that they have a higher resistance and should only be used for coax connectins but youre still not going to hurt anything.

39 Related Question Answers Found

What does YPbPr stand for?

analog component video signals

What do the colors mean on TV cables?

Most Common Colors
Composite video means that the red, green and blue video signals are all being carried by a single cable. In the color code, red and white stand for audio to the right and left speakers respectively, and yellow stands for composite video.

What color is Cable?

For most televisions
Look for component inputs on your TV. These connections have a row of five differently-colored inputs (green, blue, and red for video, white and red for audio). If you have more than one set of component inputs, it's the first set that generally works with standard AV cables.

Does VGA carry audio?

VGA cable (15-pin D-shaped connector) does not carry sound. You'll need separate cable from your computer' audio out / headphones port to TV' audio IN.

Can I use red white and yellow cables for component?


The red, green and blue wires that make up a component cable look just like the red, white and yellow cord you'd use to attach to the old-school audio-video RCA inputs on the back of an old television or another piece of vintage equipment. That's because they use the same basic technology.

Does HDMI carry audio?

HDMI cables can transfer video and audio in high definition quality from one device to another. There are a variety of reasons you may not be hearing source audio on another device when using an HDMI cable; the settings may not be correct on one of the devices, the hardware may be faulty or the cable itself may be bad.

Is VGA digital or analog?

The first and probably most important is that VGA uses an analog signal and HDMI uses a digital one. Due to that, running a VGA signal directly into a HDMI connector on a monitor could actually damage it, because the analog signals is at a higher voltage level.

What is Y Pb and Pr connections?

Basically, Y, Pb, and Pr are component video cables. The Y cable should be connected to the HD decoder, the Pb cable to the Pb outlet, and the Pr cable to the Pr outlet. In most consumer electronics, Y is green, Pb is blue, and Pr is red.

Where do I plug yellow red and white?

Plug the red, white and yellow RCA cables into the matching RCA output jacks on the rear of the device that you would like to connect to your television. Connect the other end of the RCA cables to the RCA inputs on the rear of the television to complete the connection.

What color input is audio?


The White and Red colours are used to represent Audio Line inputs and/or Outputs. The colour Red is conventionally used for the Right Channel of a stereo signal, as Red and Right both start with the letter R. The other channel (Left) will appear on a White connector.

What color is audio output?

Green: Front speakers out. Black (or dark blue on some older boards): Rear speakers out. Orange: Center/subwoofer out. Gray: Middle speakers out.

What does the red cable mean?

Red electrical wire indicates the secondary live wires in a 220-volt circuit, used in some types of switch legs and in the interconnection between smoke detectors that are hard-wired into the power system. You can connect a red wire to another red wire or to a black wire.

Is RCA digital or analog?

An RCA cable can be used to connect a variety of audio and video devices, such as camcorders to TVs or stereos to speakers. In either case, RCA cables transmit analog, or non-digital, signals. Because of this, they cannot be plugged directly into a computer or other digital device.

What is red blue green cables for?

Red/Green/Blue is for component video output signals, and also matches to similar color jacks. R/Y/W is for Right channel audio/composite video/Left channel audio and is colored mostly to let you match to the proper input and output connectors at both ends, since the female jacks are also color coded for simplicity.

Is there a USB to RCA cable?


Simply put, RCA signals cannot be transported through a USB connection unless some form of conversion occurs prior. Although it is possible to create or modify a pre-existing RCA cable by splicing wiring, the average user cannot create their own RCA to USB adapter.

What is Y CB PB CR PR?

Today, most video experts use the term "component video" as short for "analog component video" consisting of the three signals Y (luminance), Pr (or V or R-Y), and Pb (or U or B-Y). The term Y/Cb/Cr stands for the same three video signals but in digital form.

Can I plug RCA into component?

You can use any RCA cable (they're all the same thing even if they have different coloured heads) to connect composite or component video. What is important to know is that they're not interchangeable - ie, composite out has to go to to composite in, and similar for component.