What can I do with a multi tool?

10 Uses for Your Oscillating Multi-Tool

Trimming pipes and screws. Fitted with the right accessory blade, your multi-tool can become a plumber or labourer's best friend.
Plunge cuts in your decking.
Trimming wood and floorboards.
Cutting out openings in drywall.
Removing rust from metals.
Sanding down furniture.
Removing mortar.
Remove old paint.

Just so, what is a multi tool used for?

The oscillating multi-tool is one of the handiest tools you can have around the jobsite or workshop. It's versatility allows you to accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway.

Also Know, what can I cut with an oscillating tool? An oscillating tool is capable of endless home improvement tasks. It can cut holes in drywall, slice grout, grind thin-set mortar, sand, and cut through door trim, among lots more.

In this way, can you use a multi tool as a grinder?

If you don't own an oscillating multitool, buy one and you'll wonder how you got along without it. It's a saw, scraper, sander, and grinder in one handy power tool. It not only does those jobs, it does them in inaccessible places, speeding difficult jobs to completion in the process.

Are oscillating multi tools worth it?

For the most part, yes. In two out of the three tests (cutting and sanding), even those on the bottom of the oscillating pile were more effective than the control tools.

37 Related Question Answers Found

Are multi tools any good?

The best multi-tools are great for all of the above. No, this multi-tool is the powerful and versatile, oscillating variety that can sand, cut, grind and scrape its way through most building materials, including wood, drywall, grout, plastics and even metal.

Can you cut wood with an angle grinder?

Cutting wood with an angle grinder carries the risk of injury to the tool operator. Angle grinders typically spin the installed disc at 10,000 - 15,000 RPM. You might safely use it for small cutoffs but there are much better tools for safely cutting wood - circular saws, jig saws, oscillating tools, reciprocating saws.

Will an oscillating saw cut skin?

The reason they won't cut skin but will cut the cast is strictly due to rigidity. The "blade" isn't actually sharp, but just a thin disk, and the "cut" it produces in the cast is just a very thin line of ground away plaster.

Are multi tool blades universal?

When it comes to the universal multi tool blades; with so many options available, one of the biggest issues for users is separating the wheat from the chaff. It's important that the blades are of a decent quality, as the machine is only as good as the blade attached.

What is a multi tool called?

A multi-tool (or multitool) is a hand tool that combines several individual functions in a single unit.

Can oscillating tool cut brick?

Multi-tool blades come in many shapes and sizes. Cutting through cement, brick or stone can be very easy and your multi-saw will shine like a star when you use the right oscillating blade. However, for the toughest materials like rock, concrete, brick, stone, and grout, the best option is to use is a diamond blade saw.

Can oscillating tool cut concrete?

Cut Through Concrete with Oscillating Tool Accessories

By adding a carbide grit oscillating tool blade, you can use your oscillating multi-tool to cut and shape concrete. You can also use the device for jobs like grout removal.

Can you cut tiles with a multi tool?

Oscillating multi-tool blades are used for cutting holes in tiles, and they're even great for tight edges. They're ideal for making direct cuts on tile, and you can trim, shape, and file tile with ease. Start cutting the tile little by little, removing the dust that's kicked up as you go.

How do you cut a 3 inch copper pipe?

Method 3 Cutting Copper Pipe with a Hacksaw

Select the right hacksaw blade. Use a hacksaw with a small gap between its teeth so it cuts cleanly through the copper pipe.
Clamp the copper pipe, if possible.
Mark the copper pipe.
Set the hacksaw blade on the mark.
Saw firmly into the pipe.
Clean the cut copper pipe.

Are oscillating tool blades universal?

Compatibility. The blade is not universal and isn't compatible with Fein Starlock, Bosch and Dremel quick release tools, Dremel MM40/MM45 and Bosch MX30 and needs an adapter for Fein Supercut and Rockwell & Worx tools.

Can a Dremel cut metal?

The Dremel 15/16 in. Heavy-Duty Cut-Off Wheel is ideal for cutting, grooving and trimming all kinds of metal. It can also use on other materials, including thin wood, plastics and ceramics. This cutting disc is constructed from a hard abrasive used for slicing and cutting metal including hardened steel.

How do you cut concrete with a grinder?

To make straight accurate cut with the angle grinder, you should mark the position of the line to cut with a straight edge. then use a chisel to score along the pencil line, making sure that the resulting groove is deep enough to hold the blade.

What is the best oscillating tool?

So here is my list of The 10 Best Oscillating Tools.

Bosch StarlockPlus 4.0-Amp Oscillating Tool.
Makita XMT03Z 18V LXT Cordless Oscillating Tool.
Genesis GMT15A 1.5-Amp Oscillating Tool.
BLACK+DECKER BD200MTB 2.0-Amp Oscillating Tool.
Ryobi RMT1801M One+ 18-Volt Oscillating Tool.
Rockwell RK5142K 4.0-Amp Oscillating Tool.

How deep can an oscillating tool cut?

1-5/8" Wide Stainless Steel+CrV Universal Oscillating Long Reach Saw Blade. Saws up to 3" deep. Great for Flush Cuts and Plunge Cuts in Plastics and Wood.

How do you cut cement?

Use a standard circular saw, equipped with a corundum or diamond blade, for small tasks. For slabs, it's best to cut through the top inch, then use a sledgehammer to break off the rest. The jagged edge left below the cutting line provides a good rough edge for the new concrete to bond to.

What is the best cordless multi tool?

Below we pick out some of your best options to fulfill the above demands.

Fein AFSC 18 QSL SuperCut multi tool. Fein are renowned for their multi-purpose machines.
Milwaukee M18BMT compact multi tool.
Makita DTM50 oscillating multi tool.
Dewalt DCS355 multi tool.
Festool OSC18 Vecturo multi tool.

How do you cut drywall with oscillating tool?

Fit a drywall blade in your oscillating multi-tool. Something like a semicircle HSS blade can be good for cutting drywall. If you are cutting a drywall sheet down to size, use a work support to provide a stable surface for making your cuts. Power the tool up and start making your cuts along the lines.