What are snap cutters?

Asked By: Leslie Louzari | Last Updated: 1st January, 2020
Category: home and garden home appliances
4/5 (151 Views . 16 Votes)
The snap tile cutter is completely different. Also known as a rail tile cutter, it works like a glass cutter. A glass cutter has a carbide wheel, which is forcefully and slowly drawn across the glass to create a score. Once the score is made, the glass is snapped off by hand or with a tool.

Click to see full answer


Also know, can you cut porcelain tile with a snap cutter?

Cutting Porcelain Tile with a Tile Cutter This is a tool frequently used to cut ceramic tile, but it can also be used with porcelain tiles. Because porcelain is harder and more brittle, a tile cutter can be somewhat more difficult to use on porcelain tile. This is another tool that does only straight cuts.

Likewise, do tile cutters work? (Though you do need skill to line up your tiles.) Tile cutters work best for either smaller projects, projects with straight borders, or projects with soft tiles. Smaller projects mean fewer tiles to cut, tile cutters can't cut wavy lines, and softer tiles snap better after scoring.

Also know, how do you score and snap on ceramic tile?

Use a glass cutter to score the tile on the cut line. Place the tile on solid surface with a wire clothes hanger under the tile aligned with the score mark. Press down on either side of the tile to break the tile along the score line. If needed, smooth the cut by rubbing the edge on concrete or a brick.

Can you cut tiles with a glass cutter?

The Right Blade If you can switch the blade to a glass-cutting blade, which is encrusted with tiny diamonds that cut through the glass without cracking or chipping it, you can use a tile cutter to cut glass. Glass is more fragile than ceramic or porcelain tile, so work slowly to reduce the risk of damage.

38 Related Question Answers Found

Can you cut tile without a wet saw?

Cutting Porcelain Tiles Without A Wet Saw
The simplest is using a glass cutter. All you need is a square or anything with a straight edge, a marker and a clothes hanger. Step one, use a marker and a square to draw a straight line of where you want to cut.

How do you cut porcelain tile without chipping it?

Shallow Cut with Adjustable Saw
Fill the reservoir under the platform of a diamond-blade wet saw with water. Adjust the saw to cut to a depth of 1/8 inch into the tile; not completely through it. In saws with a blade that lowers, the depth is usually adjusted at the back end of the saw blade near the hinge.

What is the best tile cutter?

Top 10 best dry and wet tile cutters that we recommend are listed below:
  • Plasplugs Compact Plus XL DWW200 Electric Tile Cutter.
  • Einhell TH-TC 618 600w Tile Cutter.
  • Bellota Manufacturer PRO 65 Manual Ceramic Tile Cutter.
  • Bosch PTC 470 Tile Cutter.
  • Rubi Star-63 - Tile Cutter.
  • Vitrex 102360TC 50cm Heavy-Duty Tile Cutter.

How much does a wet saw cost?

Wet saws are specialty machines, and like table saws, they come in a range of qualities and prices. Online retailers offer wet tile saws ranging from less than $100 to several hundred dollars. Unlike table saws, though, this is a one-use tool that you won't use except when you are tiling.

Does porcelain tile chip easily?


The majority of porcelain tiles are glazed porcelain and when chipped, the porcelain shows. Porcelain is denser than ceramic which means it has a lower absorption rate. A tile with a PEI of 1 will scratch and chip easily and should only be used on walls. A PEI of 2 is good for light residential areas like bathrooms.

What kind of drill bit do I use for porcelain tile?

Diamond-tip drill bits are more expensive, but they do exactly what you need. The diamond-coated end of the tile bit or hole saw is specifically made to drill through tile and porcelain. Really, when you're drilling through porcelain or tile, the bit isn't actually drilling at all.

Can you cut porcelain tile with a table saw?

It is not recommended to cut tile with a table saw but it is possible. You can cut a ceramic tile and some stone tiles with a table saw, but the dry blade used with a table saw will create more chips in the tile than if you used a wet saw.

What is the best blade for cutting porcelain?

One of the best diamond saw blades that RUBI offers to cut porcelain tiles is the Premium Arrowhead. RUBI has two types of blades used on porcelain tiles both of them offering high speed and great precision. Both types, the Premium Arrowhead and the Porcelain blade, are available in 4 ½, 7 and 10 inches.

How do you drill through tiles without cracking them?

Use a carbide-tipped masonry bit; regular twist-drill bits can't cut through the fire-hardened glaze. You'll also need to keep the bit from slipping off the glossy surface. The secret: Put two strips of masking tape onto the tile in an X pattern as shown above.

How do you finish tile edges?


To give the edge a clean, water-tight finish, place a piece of masking tape one grout joint away from the edge of the last tile. Fill this gap between the tile and the masking tape with a smooth bead of caulk. This will finish the edge without extra tiles.

Do you have to use a wet saw to cut ceramic tile?

When to Use a Wet Saw
While all tiles can be cut on a wet saw, you'll get the best results from using a wet saw on the following materials: stone tiles, such as marble or granite; porcelain tiles; glass tiles, when the wet saw has been outfitted with a glass cutting blade; and commercial grade ceramic floor tiles.

Can you score and snap slate tile?

Use a Tile Saw
There are many different ways to cut tiles, including tile saws, carbide tipped pencils and score-and-snap cutters. The way that slate is formed, however, makes it nearly impossible to use anything except a tile saw -- either a wet saw or a dry angle grinder with a tile-cutting blade.

What type of blade to cut porcelain tile?

Diamond blades are great for cutting porcelain tile, but they are some of the sharpest blades in the industry.

What saw to use to cut ceramic tile?

Wet saw. The wet saw is the tool of all tools for cutting tile. It works by using water to keep the blade wet and cool while you saw the tile. You can use it to make straight, diagonal, combination, and even very tiny cuts in ceramic or porcelain tile.

Why do my tiles break when cutting?


Push the handle all the way down and pull back to score the tile with a deeper cut. Pressure snaps the tile at the scored line. Lowes.com recommends applying equal pressure on either side of the tile with both hands. Too much pressure can cause tiles to crack and break.

How do you cut ceramic tile without a tile saw?

If only a few ceramic tiles need to be cut, a glass cutter and a wire hanger can be used to get a clean, precise cut. Mark the tile where it needs to be cut. Guide the glass cutter along the line using a square guide to score the tile.

How do you cut ceramics?

To cut a ceramic tile using a glass cutter, start by using a pencil and a square, or a ruler shaped like a right angle, to measure and mark your tile. Next, place the square right next to the marked line so you can use it as a guide, then press down on the tile with the glass cutter and drag it along the line.