How much does it cost to have a shadow box fence installed?

How Much Does a Shadow Box Fence Cost?

Fence Type	Cost Of Materials	Total Project Cost
Basic Shadow box Fence	$984-$1804	$1312-$2452
Quality Cedar Shadow box Fence	$2460-$3936	$3075-$3756
Vinyl Shadow box Fence	$3608-$5248	$4376-$6232

Likewise, people ask, what does a shadow box fence look like?

A shadowbox fence is a specific style of privacy fencing. Contractors use tall pickets to create a fence that resembles a standard picket or dog-ear fence when you look at it head on. However, rather than attach the pickets all on one side of the rail, they alternate the boards.

Also Know, can you see through a shadow box fence? Since there's a board in between the pickets on the outside of the fence and the pickets on the inside of the fence, this causes a shadow effect. Shadow box fences are typically 6 or 8 feet tall but aren't completely private. When you look straight at them, you can't see what's on the other side.

Furthermore, how many pickets do I need for a shadow box fence?

Add the slat or picket spacing to the width of each one, then divide this number into the total length of the fence to find the number of slats or pickets you need. For example, if you're using 6-inch slat, which is 5 1/2 inches wide, and you're spacing them by 1/2 inch, you need 400 of them for a 200-foot fence.

What is shadow box fencing?

Shadow box fences are a style of fence that looks good on both sides of the fence. Another positive of the shadow box is that it allows air to flow through the fence.

34 Related Question Answers Found

How much does a shadow box fence cost per foot?

Cost of Shadowbox Fence

Shadowbox Fence Costs	Zip Code
	Basic	Best
Shadowbox Fence – Installation Cost	$550.00 - $575.00	$700.00 - $700.00
Shadowbox Fence – Total	$1375.00 - $1475.00	$1825.00 - $1985.00
Shadowbox Fence – Total Average Cost per square foot	$14.25	$19.05

How much does a partial fence cost?

On average, fence installation costs between $13 and $25 per linear foot with most homeowners spending between $1,580 and $3,418 depending on the type of fencing materials selected.

Fence Installation Cost.

National Average Cost	$2,711
Maximum Cost	$7,500
Average Range	$1,580 to $3,418

How much will my privacy fence cost?

Privacy Fencing

A 4- to 6-foot tall privacy fence typically runs between $10 and $30 per foot to install, including materials. Depending on the type of wood you choose and the type of structure you need, installation can cost range from $8 up to $100 per foot.

Do you need a permit to replace a fence?

In most cases, you won't need to obtain a permit if your fence meets the following criteria: The work is routine repair and maintenance (for example, replacing the pickets on a fence) The fence is 1.5m or less in height.

How many rails do I need for a 6 foot fence?

three rails

How far apart should fence rails be?

Start this project by setting square fence posts 8 feet apart on center. Two parallel rails are sufficient for fences shorter than 4 feet. Three rails are necessary for taller fences and for heavier privacy fences.

How deep should a fence post be?

2 feet

How do you redo a wooden fence?

Fence Preparation

Rent a pressure washer to thoroughly clean the fence before continuing to restore it. Attach the pressure washer to water and power sources and spray the fence slowly and precisely to remove flaked paint or varnish, mold, mildew and dirt.

How do you replace a fence panel?

Lay your fence panel on the ground with its "front" facing up.

Step 1: Reinforce Your Fence Panel.
Step 2: Make Legs.
Step 3: Clamp the Legs.
Step 4: Roll it Over.
Step 5: Lift the Structure to Sit Vertically.
Step 6: Remove Clamps and Lengths of Wood.

When should I replace my fence?

With proper maintenance, your fence should be expected to last anywhere between 20 to 50 years, depending on the material. If your fence is older than you are, it's probably time for a new one! Damage isn't the only reason to replace your fence.

How do you work out the spacing between pickets?

Divide the total spaces area by the number of pickets plus one: 33 divided by 18 equals 1.83 (inches). This is the precise width of each space between pickets (and between the pickets and posts).

How many pickets do I need calculator?

First, multiply your fence length by the number of posts. A 100-foot fence with 12 posts would equal 1,200. Then, add the width of picket to your desired gap between pickets. Many pickets are 5.5 inches wide and a common gap is 1/2 an inch.

How do you calculate fencing?

Equations used in the fence calculator

Post length = fence height * 1.5. Total number of rails = number of rails per section * number of sections. Total number of pickets = fence length in inches / (picket width + picket spacing) (round the result up)

Should you leave a gap between fence boards?

When building a solid privacy fence, the fence boards are either butted tightly together, or spaced 3/8 to 1/4 inch apart to allow the wood to expand and contract in wet and dry weather. Thus, 6-inch fence boards would be spaced approximately 3 1/2 inches apart, since the actual width of a 6-inch board is 5 1/2 inches.

How much does it cost to fence 1 acre?

Cost To Fence Per Acre

Acreage	Wire or Electric	Split Rail or Wood
1	$1,050 – $1,700	$5,000 – $14,200
2	$1,500 – $2,350	$7,100 – $20,100
5	$2,300 – $3,750	$11,200 – $31,700
10	$3,300 – $5,300	$15,800 – $44,900

How many bags of concrete do I need for a fence post?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

What is a linear foot in fencing?

Linear Feet: a straight line. If you have a fence that is 6 feet high and 100 feet long then your fence is 100 linear feet long (the width is not taken into consideration). Wood fence, chain link fence, aluminum fence, vinyl fence and chain link privacy slats are often sold by the linear foot.