How do you hang blinds from window trim?

Asked By: Anghelina Larrigain | Last Updated: 27th April, 2020
Category: home and garden smart home
4.5/5 (43 Views . 41 Votes)
Outside mount blinds or shades can be mounted 2 ways – to the trim around your window, or to the wall above the window opening (like the photo above). If you're mounting to the trim, measure the width of the trim at the top of the window.

Click to see full answer

Keeping this in consideration, can you mount blinds on trim?

You can mount your blinds to the trim as long as it is flat and meets the minimum requirements for an outside mount. Mounting on the trim of the window is the easiest route because all you need to collect is the size of the trim dimensions.

Furthermore, should blinds match window trim? And since most blinds fit inside the trim, they generally should match or be slightly darker than the trim. If you currently have white blinds or window treatments, wood blinds will of course look darker but won't necessarily darken the room unless all the walls are dark, too.

Furthermore, do blinds go inside or outside window frame?

For this reason, an inside mount is perfect for areas where visual appeal is more important than light control, such as the living room, dining room, and kitchen. An Outside Mount, meanwhile, is installed outside of the window frame, usually on the window trim.

Should blinds touch window sill?

In most cases blinds look and work the best when they rest on the window sill. No one is ever going to notice extra 1/2" of length and this keeps them from blowing in a slight breeze. If you prefer for the blinds not to touch the windowsill, you should deduct 1/4".

24 Related Question Answers Found

Can I screw blinds into window frame?

You can very easily screw into the window, I sometimes use a sharp plasterboard screw to start the hole off, saves drilling a pilot hole. You could also drill through the cloaking at the side, then use a masonry drill into the wall. I'd use the window, and white silicone would cover any holes in future if necessary.

Do outside mount blinds look good?

Outside Mount Blinds
This does not give your window treatments that recessed or flush look, but does provide superior light control. For this reason, outside mounts are recommended for blackout shades. Otherwise, there will be light gaps on the left and right sides of the shades.

How much depth do you need for inside mount blinds?

Inside mount blinds are installed inside the window casing or door, or wall to wall in a room. The window casing must be at least 2 3/4" deep for flush track mount or 3 3/4" deep for flush vane mount (See diagram above). Window should have a minimum recessed space of 2 3/8" for inside mount.

Can I drill into a vinyl window frame to hang blinds?

If you have vinyl windows, you won't be able to screw the brackets directly into the vinyl channel that holds the window. The vinyl is not strong enough to hold the weight of the blinds. Fix the brackets to the top or sides of the inside opening or install them outside the opening.

How much space do you need on side of blinds? recommends at least 1.5" of overlap on each side of the window for blinds and shades, and 2" of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.

Should blinds cover the window frame?

For an outside mount, the blinds are mounted to the front of the window frame or the wall above the window. Outside mount blinds or shades will need to be larger to cover the entire window frame. It gives a cleaner look, shows off your window casing, and will block more light.

Where do you put blinds on a deep window sill?

For outside mount, the brackets should be placed on the face of the window outline on the two sides of the window. And for inside mount, the brackets should be put up against the inside top corner of each side window.

How do you hang blinds without brackets?

How to Hang Wood Blinds Without Brackets
  1. Drill two holes through the face of the head rail approximately 1 inch inward from each end.
  2. Place the head rail over the top window trim and center it over the window.
  3. Drill pilot holes into the top window trim with the drill and a drill bit approximately half the size of your screws.

How do you fit blinds to UPVC windows without drilling?

Here are our simple steps on how to fit blinds to UPVC:
  1. Mark the place where you will fix your brackets.
  2. Perfectly align your brackets for a level blind.
  3. Drill screws into your UPVC window frame to secure the brackets.
  4. Clip your headrail into the brackets to complete your fit.

Should outside mount blinds cover trim?

On the one hand, inside-mounted blinds foster a clean, modern look that shows off the window trim. On the other hand, outside-mounted blinds conceal the window trim but do a better job of blocking light. There's no right choice; it all depends on the room in question and your style preferences.

Can you drill into UPVC window frames?

The idea of drilling into your UPVC frames might sound terrifying but if you take care in doing so there's nothing to worry about. The main thing to avoid is the glass itself as if you can imagine. Using a 3mm drill bit, drill directly into the mark you have created on the frame.

Should blinds be lighter or darker than walls?

Although colors and patterns will vary, depending on your personal preferences and sense of style, it is best to choose window treatments at least one shade lighter or darker than the walls. Coordinating curtains and blinds to match your furniture colors is also worth considering.

Should Roman shades be inside or outside mount?

Inside, is duh… inside the window frame and IMO usually preferable, especially if there's a pretty window casing. Outside mount is when the shade is outside the window frame. There are a few different reasons why we do that sometimes.

Can blinds be longer than window?

Because you're mounting the blinds outside the window on the wall above, they need to be slightly wider and taller than the opening. Without adding these extra inches, your window covering may have gaps on the side where light shines through, or not fully reach the window sill.

Which way should I put my blinds?

The direction -- up or down -- to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With the blinds tilted up, passers-by can't see in: The convex side faces the window, creating less space through which to view.

Should I install my own blinds?

One of the best reasons to install your own blinds is that it allows you to complete the project on your own schedule—not a professional's. When you order window treatments from Blindster, you may be ready to set them up right away, but hiring a professional can mean the job won't get done for days or even weeks.