How should blinds be hung?

Asked By: Arfang Fonteneau | Last Updated: 25th May, 2020
Category: home and garden smart home
4.2/5 (280 Views . 10 Votes)
You can either mount your blinds on the inside or on the outside of the casing. If you hang your blinds on the outside, your window (and the blinds) will look larger. Hanging the blinds on the inside gives your window a slimmer look. Inside mounts also allow more light to shine around the edges of the blinds.

Click to see full answer

In respect to this, do blinds go inside or outside the window?

Inside mounted blinds and shades will give you the cleanest look. That is because they fit inside the window frame, and can be mounted as deep or as shallow as you like. Outside mounted blinds and shades give the flexibility of choosing almost any window covering for any situation.

Likewise, do you need a drill to install blinds? A screwdriver is all that is needed to install your blinds, or for an easier installation, you can use a cordless screwdriver, or a drill with a 1/4-inch Hex head drill bit. Space your valance clips evenly, avoiding contact with any mechanism inside the top of the blind.

Thereof, where do you put blinds?

Outside the Frame For maximum privacy, mount the blinds above the window frame and extend them past the sides and bottom of the frame. Light bleed around the blinds is decreased with the extra width and length. If necessary, shim the blind bracket out so the blind falls freely.

How do you release blinds?

To release the blinds tug the lift cords to the side pulling towards the center of the blinds. If this does not work, the pawl must be released, follow these easy steps. Remove the blinds by taking the headrail out of the brackets. Take a screw driver and press the pawl down in the track in which it travels.

27 Related Question Answers Found

What are the different types of blinds?

B. Different Types of Blinds
  • Vertical Blinds. Vertical blinds have individual slats that run along a track at the top of the blind.
  • Venetian Blinds. Venetian blinds are the most popular style of blinds.
  • Mini Blinds.
  • Micro Blinds.
  • Panel Blinds.
  • Pleated Shades.
  • Cellular Shades.
  • Roman Shades.

How do you hang blinds without brackets?

How to Hang Wood Blinds Without Brackets
  1. Drill two holes through the face of the head rail approximately 1 inch inward from each end.
  2. Place the head rail over the top window trim and center it over the window.
  3. Drill pilot holes into the top window trim with the drill and a drill bit approximately half the size of your screws.

How do I measure for inside mount blinds?

Inside-Mounted Horizontal Blinds
  1. Measure exact window width at top, middle, and bottom.
  2. Use the narrowest width. Do not make any deductions - provide the exact measurements of the narrowest width.
  3. Measure exact window height at left, middle, and right side.
  4. Use longest height.

How do you fit blinds to UPVC windows without drilling?

Here are our simple steps on how to fit blinds to UPVC:
  1. Mark the place where you will fix your brackets.
  2. Perfectly align your brackets for a level blind.
  3. Drill screws into your UPVC window frame to secure the brackets.
  4. Clip your headrail into the brackets to complete your fit.

Do Roman blinds look better inside or outside recess?

In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.

Are blinds better inside or outside recess?

Blinds generally look better inside the recess. If you position Roman blinds outside the recess, for reasons of light or for inward-opening windows, then you have to accept that from the side view the batten and workings of the blind will be seen.

How much space do you need on each side of blinds? recommends at least 1.5" of overlap on each side of the window for blinds and shades, and 2" of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.

Should Roman blinds be inside or outside recess?

If you have little or no flat wall space to either side of your window then it may be better to consider mounting your Roman blind inside the recess. Ideally Roman blinds mounted outside of a window recess should extend a bare minimum of 5cms (2 ½ “) to either side of the window.

Should Roman shades be inside or outside mount?

Inside, is duh… inside the window frame and IMO usually preferable, especially if there's a pretty window casing. Outside mount is when the shade is outside the window frame. There are a few different reasons why we do that sometimes.

Should blinds cover the window frame?

For an outside mount, the blinds are mounted to the front of the window frame or the wall above the window. Outside mount blinds or shades will need to be larger to cover the entire window frame. It gives a cleaner look, shows off your window casing, and will block more light.

What is inside blinds?

An inside mount is when blinds or shades are installed inside the top of the window frame. Installing window treatments as an inside mount gives your windows a clean, finished look, allows blinds or shades to be flush with the trim or wall, and doesn't cover decorative molding.

Do outside mount blinds look good?

Outside Mount Blinds
This does not give your window treatments that recessed or flush look, but does provide superior light control. For this reason, outside mounts are recommended for blackout shades. Otherwise, there will be light gaps on the left and right sides of the shades.

Where do you put blinds on a deep window sill?

For outside mount, the brackets should be placed on the face of the window outline on the two sides of the window. And for inside mount, the brackets should be put up against the inside top corner of each side window.

How much do blinds cost?

Material Cost Per Window Best For
Fabric $100 Vertical blinds
Vinyl 1 $120 Slat blinds
Bamboo $80 Roller blinds
Faux wood $95 Slat blinds

Is it hard to install blinds?

Difficulty: Beginner
Blinds can be installed two basic ways: mounted inside or outside the window opening. Inside-mounted blinds look trim. Because they don't overlap the window opening, they admit more light around the edges. Tip: The longer the blinds are, the more difficult they are to raise and lower.

Does Home Depot install blinds?

The first step of installing new blinds or shades is proper measurement. With Home Depot's Blinds Installation service, we provide professional measurement and installation of your new window treatments and make sure they are sized and hung correctly.

Can you mount blinds on trim?

You can mount your blinds to the trim as long as it is flat and meets the minimum requirements for an outside mount. Mounting on the trim of the window is the easiest route because all you need to collect is the size of the trim dimensions.