How do you fit Venetian blinds to UPVC windows?

Asked By: Sindia Balteanu | Last Updated: 10th April, 2020
Category: hobbies and interests woodworking
4.5/5 (67 Views . 11 Votes)
Here are our simple steps on how to fit blinds to UPVC:
  1. Mark the place where you will fix your brackets.
  2. Perfectly align your brackets for a level blind.
  3. Drill screws into your UPVC window frame to secure the brackets.
  4. Clip your headrail into the brackets to complete your fit.

Click to see full answer


Consequently, can you fit Venetian blinds to UPVC windows?

fitting blinds on UPVC. Place your brackets on the UPVC window frame where your blind will hang. 3. Use a pen or pencil to mark both holes where the screws will go in your brackets.

Similarly, can you put a blind on a UPVC door? uPVC Doors. You can drill into the uPVC frame quite easily to face-fix your blind to the door… But if you decide to change the type, style or size of blind you're using at all, the frame could be left with some unsightly holes.

Consequently, can I screw into UPVC window frames?

The idea of drilling into your UPVC frames might sound terrifying but if you take care in doing so there's nothing to worry about. The main thing to avoid is the glass itself as if you can imagine. Using a 3mm drill bit, drill directly into the mark you have created on the frame.

Can I drill into window frame?

Short answer yes. But the wood frame around a window is usually thin, about ¼″, so there's not a lot of material for the screw to 'bite' into. Use your drill with a 3/16″ drill bit to make a pilot hole so the wood frame does not split. Also avoid drilling within 1″ of any of the edges of the wood frame (if possible).

37 Related Question Answers Found

Do uPVC windows have metal in them?

uPVC windows are very rarely uPVC all the way through – they often contain metal cores which can make drilling problematic.

What are INTU blinds?

INTU Blinds are an alternative to Perfect Fit Blinds. All of our Intu Blinds are "bead-fit" which means no drilling or screwing is required to fit them to your windows, doors or conservatory. They simply Snap Fit!

What are perfect fit Venetian blinds?

With its water-resistant and wipe clean properties, our Perfect Fit Venetian Blinds are a practical as well as stylish choice. These blinds offer you complete control, with slats that have a high degree of rotation, meaning you can effectively choose how much light, heat and privacy you wish to have.

Can you fix curtain rails to plastic windows?

OF SUITABLE LENGTH AND DIAMETER TO GO THROUGH HOLE IN BRACKET AND EXTEND FAR ENOUGH THROUGH SO IT CAN BE SCREWED INTO THE UPVC SECURELY. OF THE RECOMMENDE SIZE FOR THE SCREW. (DRILL SIZE ON SCREW PACKAGING) OR ASK STAFF. BRACKETS ARE FITTED JUST FIX YOUR RAIL TO THEM.

Can you drill into PVC?


Because PVC is a soft plastic, you can use both wood and metal drill bits to make small holes, and spade bits can be used for larger holes. To keep the drill bit from slipping, make a small divot in the pipe using a hammer and nail or center punch.

Should blinds go inside or outside window frame?

Inside Mounts
They offer a clean, finished look because the blinds or shades are recessed and contained inside the window casing. Inside-mounted window treatments are NOT the best choice for you if: Your window frame is not deep. If your window is not set deeply enough, recessed blinds may extend outside the frame.

How do you drill holes for blinds?

Using your pencil, mark the spots where you will need to drill your pilot holes (there should be two of them). You should choose two diagonal holes to drill into so that your brackets are sturdier. Take the brackets away and hold up a level to the two holes are even.

Can you screw into plastic?

Many plastics are more rigid and prone to cracking than wood, and you should always pre-drill a hole before driving a screw through them. There is a simple technique that will allow you to drive screws without drilling holes first. It's always best to pre-drill holes before screwing through rigid plastic.

Can you screw blinds into vinyl windows?

If you have vinyl windows, you won't be able to screw the brackets directly into the vinyl channel that holds the window. The vinyl is not strong enough to hold the weight of the blinds. Fix the brackets to the top or sides of the inside opening or install them outside the opening.

What are self drilling screws?


A Self-Drilling Screw is a Self-Tapping Screw with the added feature of a drill point. The drill point looks a lot like the point of a drill. It will drill a hole and form the mating threads in one operation. If a screw will drill its own hole it is a Self-Drilling Screw.

How do you cut PVC venetian blinds?

Cutting down the slats
  1. Align the slats so that they are even.
  2. Using a clamp or rubber bands, secure the slats together into position.
  3. Wrap the slats with masking tape to prevent chipping.
  4. Measure where you want to cut and mark a line with your pencil.
  5. Lay them on the saw and line up the blade where you need to cut.

How do you clean Venetian blinds?

Thorough cleaning of your Venetian blind outdoors
Next, fill a bucket with warm water mixed with a mild detergent. Then carefully take down your blind and lay it on the prepared surface. Using a soft brush or non-abrasive sponge, gently clean each slat. Then rinse with cold water or a garden hose.

Can you cut Venetian blinds to fit?

You should be able to cut aluminium and pvc slats with a pair of strong and sharp scissors or maybe tin snips if you have them. The slats from wood venetian blinds can be cut individually with a hand panel or jigsaw but for the best results all the slats should be cut together with a powered chop saw or bench saw.

Can I drill into a UPVC door?

Yes is the answer. Drill a small pilot hole for the screw and use a self tapping type of screw. Don't use a screw that is too long or you may cause damage to something inside the door. You may find that the door has some steel re-enforcing under the upvc but you should be OK if you have drilled said hole first.

Can I drill through UPVC window frame?


You can very easily screw into the window, I sometimes use a sharp plasterboard screw to start the hole off, saves drilling a pilot hole. You could also drill through the cloaking at the side, then use a masonry drill into the wall. I'd use the window, and white silicone would cover any holes in future if necessary.

Can I drill into UPVC window frame?

The idea of drilling into your UPVC frames might sound terrifying but if you take care in doing so there's nothing to worry about. The main thing to avoid is the glass itself as if you can imagine. Using a 3mm drill bit, drill directly into the mark you have created on the frame.

What Are Perfect Fit blinds?

Perfect Fit blinds are the revolutionary new type of blind for uPVC windows, doors and conservatories. The blinds require no drilling as they clip directly onto the window. Once the clips are in place a frame is added which holds the blinds.