How do I get my GE alarm to stop beeping?

Asked By: Farhad Ballano | Last Updated: 26th March, 2020
Category: home and garden home security
4.6/5 (1,888 Views . 17 Votes)
Turn off the status beeps on the security alarm system by selecting the menu and going to "Disable TR BEEPS OFF/ON." Press 1 to turn off the beeps. The display will flash to indicate that you turned off the trouble beeps.

Click to see full answer


Also asked, how do I get my alarm to stop beeping?

To reset your fire alarm and stop the smoke detector from beeping:

  1. Turn off the power to the smoke detector at your circuit breaker.
  2. Remove the detector from its mounting bracket and unplug the power supply.
  3. Remove the battery from the smoke detector (if there is a battery).

Additionally, how do I get my DSC alarm to stop beeping? Note: DSC keypads also emit "normal" beeping caused by the "Chime" function. You can easily toggle this on or off by pressing and holding the "Chime" button on any keypad that has function keys. For keypads without a chime button, just press "*4".

In this regard, what does it mean when your alarm system keeps beeping?

Most often this is due to a loose sensor or a faulty battery. Household alarms have a display screen on the main control panel that indicates which sensor is causing the beeping. To fix a house alarm system that keeps beeping sometimes requires bypassing the zone that the sensor is in altogether for a short time.

How do you turn off the alarm?

Tap "Clock." Select "Set Alarm." Press and hold your finger against the alarm you want to delete until the "Delete Alarm" option appears, then tap "Delete Alarm." That specific alarm will be removed from your device.

16 Related Question Answers Found

Will house alarm go off if battery dies?

Once your battery dies, your alarm is then completely dead the duration of the power outage. Alarm batteries are not built to handle such frequent, long periods of dependency.

How do I silence my ADT alarm?

In most cases, low battery alerts will make a beeping sound. You can silence them by pressing the [OFF] or [#] buttons on your panel's keypad. Before silencing your alert, you should consult with ADT for guidance on where and how you can find a replacement battery for your system.

How do you disarm a house alarm without the code?

Access the Main Control Panel of Your Alarm System
  1. Locate the main access panel of your home alarm system.
  2. Remove the AC power to the home alarm console from the wall directly.
  3. Use your console's access key (or another item such as a small screw) to unlock and open the system's backing.

How do I stop my house alarm from beeping with low battery?

If faulty or dead batteries are not the cause, try to silence your alarm.

Most standard systems will allow you to stop the beeping using one of the following methods:
  1. Disarm your system by entering your unique code.
  2. Arm your system and immediately disarm.
  3. Press the status button on your keypad.

How do I turn off my ADT alarm without the code?


How Do You Stop an ADT Security Alarm After It Goes Off?
  1. Go to your home alarm's keypad and enter the code you were given that shuts off the alarm. This code is given to you when you first have the alarm installed.
  2. Go to your alarm's transformer box and remove the battery.
  3. Go to your home's circuit breaker.
  4. Flip off the switch and your alarm will shut off.

Why is my house alarm beeping every 30 seconds?

If there is no fire and your smoke detector beeps every 30 seconds or so, see below. A smoke detector or smoke alarm in your home or apartment will beep or chirp if the batteries need to be replaced. The smoke alarm will make this noise to alert you that soon the batteries will be completely dead.

How do I reset my home alarm after changing the battery?

Press the "Home" or "Away" button to arm the system, then immediately enter your access code and press "Off." This action will reset the alarm to illuminate the low-battery signal to the system. The "Low Bat" indicator will go off, and the sensor number will be erased on the keypad of the master console.

Why does my ADT alarm system keep beeping?

The number one reason why your ADT alarm system may be beeping is because the batteries in the keypad are running low or are dead. Then simply replace the battery and turn the unit back on. If the problem was the battery, the beeping should immediately stop.

How do I reset a DSC alarm system?

How to Reset a DSC Alarm After the Power Has Been Off
  1. Open the access door on the unit.
  2. Press and hold the "RESET" key for 2 seconds.
  3. Press the buttons "*72" if the alarm does not reset after pressing the RESET button.
  4. Check the sensors if it still does not turn off.

How do you turn off a house alarm in a power cut?


Be aware, as soon as you remove the lid of the main control panel a tamper switch is released which should activate the internal sounder. You should be able to stop this sound by cancelling the tamper alarm by entering your code into the keypad.