Does VHT engine paint need primer?

Asked By: Sulay Patselas | Last Updated: 6th January, 2020
Category: hobbies and interests jewelry making
4.9/5 (1,212 Views . 32 Votes)
No primer is required when the surface is properly prepared. These VHT coatings are specifically designed to withstand high temperatures, extreme weather, rust and corrosion which makes them ideal for exhaust system protections. VHT Roll Bar Paint does not require the use of a PRIMER.

Click to see full answer


Also, does engine paint need primer?

Absolutely, if you are talking about sheetmetal. It is true that you would not want to spray a car without primer first. For one the paint would be splotchy from variations in the body work, but also the paint has a hard time sticking to smooth sheet metal.

Also, is VHT Paint any good? VHT Flameproof Coating paint claims to have silicone ceramic base and good up to 2000*.

Hereof, does Duplicolor engine enamel need primer?

The Engine Enamel Grey Primer is an actual Primer that would require a top coat of Paint/Clear over it. Primer should not be used as a top coat.

What is the best paint for engines?

Best Engine Paints – Buyer's Guide and Reviews

  • Rust-Oleum: Best Value Enamel.
  • POR-15: Best Surface Area Coverage Enamel.
  • VHT: Best Durability and Heat Resistance Enamel.
  • PlastiKote.
  • Dupli-Color: Best Engine Enamel.

33 Related Question Answers Found

Does high temperature paint need primer?

Many high temp stove paints are self-priming with no additional primer needed for most indoor applications. Under rare circumstances (outdoor use and extremely humid climates), a high temp primer may need to be applied prior to painting.

Should I paint my engine block?

Most people consider painting an engine block when rebuilding the motor. Not only does it create a more attractive appearance, but it also protects the engine from rust and corrosion. You can match the color of your engine to the paint of your vehicle which also needs protected for a customized look as well.

How many coats of paint does an engine need?

As a general rule of thumb, a few thinner coats will provide a higher-quality finish than one or two heavy coats. For extra protection, use a high heat engine enamel clear coat applied the same way as the primer and top coat engine enamel color.

How do you prep and paint an engine block?

Completely coat the engine in degreaser spray, letting it soak according to the instructions on the can. Step 2: Rinse the engine with clean water completely. Spray it with a garden hose or a pressure washer to remove the degreaser. Step 3: Remove water from engine block.

Which is better enamel or acrylic paint?

Unlike enamel paints which come as oil- or water-based, acrylic paints are solely water-based. They dry as matte, but a glossy finish can be painted over it if preferred. They are also safer than enamel paints since they do not emit any kind of fumes.

What is engine enamel paint?

About Engine Enamel
This durable coating creates a smooth, high-gloss finish that withstands intermittent high heat and resists oil, gas, grease, rust, salt, humidity and solvents. Resists heat up to 500°F. Gas & Oil Resistant.

What is engine enamel?

VHT ENGINE ENAMEL™ VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane and ceramic resins, which produce a tough and long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed.

Who makes VHT Paint?

A division of Dupli-Color and the Sherwin-Williams family, VHT—which literally stands for Very High Temperature—specializes in paints and coatings for high-temp applications.

How long does VHT caliper paint last?


The coating system products consist of primer, paint, and clear coat. VHT caliper paint dries to the touch in 30 minutes and completely over night. VHT caliper paint only attains its unique qualities after correct curing.

Can I paint my exhaust?

PAINT: Using the same technique you used to apply the primer, apply 2-3 light coats of High Heat spray to the exhaust pipe. Then, let the paint dry for 1-2 hours before moving on to the curing process. FINISH: Once the exhaust pipe is completely cured, it's ready for use.

Is Rustoleum paint heat resistant?

The Rust-Oleum Specialty 12 oz. High Heat Aerosol Paint works well on grills, wood-burning stoves, engines and other metal items. It comes in a variety of colors and is great for use in temperatures up to 1,200 degrees fahrenheit. The paint is rust and corrosion resistant for durability.

What is the best header paint?

Automotive High Heat Primer Spray Paint
The ones produced by Rust-Oleum are the best you will find. The reason why you should always paint the surface of the header with some primer is that it helps the actual paint to adhere better to the metal.

How do you treat high temperature paint?

Bake at 600°F (315°C) for 30 minutes and then allow 30 minutes to cool. Caution: Be sure not to exceed the heat tolerance of the least heat tolerant part. Run the vehicle at idle for 10 minutes and then allow 20 minutes to cool. Run vehicle at idle for 20 minutes, then let cool for 20 minutes.

Do you have to cure VHT Paint?


Curing:VHT Brake Drum, Caliper and Rotor Paint will dry to the touch in 15 to 30 minutes depending on humidity. It will air dry overnight. The paint must then be cured. After the paint is dry to the touch, bake at 93°C for 20 minutes.

What is the best high temp engine paint?

Best Engine Enamel Paints
  • Rust-Oleum. Gas & Oil Resistant Engine Enamel. High-quality engine enamel paint that resists high temperatures and is easy to apply, all at a great price.
  • POR 15. Engine Enamel.
  • Dupli-Color. Engine Enamel.
  • Valspar. PlastiKote Engine Enamel.
  • VHT. High Temperature Engine Enamel.

What is high temp paint?

High Temperature Paints and Primers
XTC is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F. It functions much like galvanizing as it locks itself to bare metal surfaces leaving a perfect primed surface for top coating.