Can you use Clorox on tile floors?

Category: home and garden interior decorating
4.2/5 (564 Views . 14 Votes)
Using Clorox on Your Ceramic Tile Floor
Clorox is a strong bleach that should only be used as needed. Typically bleach is not required for cleaning the actual tile, but more for the grout. Grout can become dirty and dull over time, leaving you in need of a strong cleaner that removes all of the buildup.



Consequently, is it okay to use bleach on tile floors?

For mopping floors (ceramic tile, vinyl, linoleum—not marble or other porous surfaces that aren't safe for bleach), mix up a solution of ¾ cup bleach added to 1 gallon of water (or ½ cup if you are using New Concentrated Clorox® Regular Bleach2).

Likewise, what is the best cleaning solution for ceramic tile floors? Vacuum or sweep the tile to remove any dirt particles. Fill a bucket with a gallon of warm water and mix in a ¼ cup of white vinegar, a small amount of All-Purpose-Cleaner, Dish Soap or the manufacturers recommended cleaning solution (water alone can be used to give an effective cleaning).

In this way, how do you disinfect tile floors?

Ceramic and Porcelain

  1. Mix 1 gallon of water with 1/2 cup ammonia, 1/2 cup white vinegar and 1/4 cup borax.
  2. Pour your disinfecting mix into a spray bottle to spray tile walls, or soak a mop in the solution to spread it across tile floors.
  3. Rinse the tile surface with cool water to remove the disinfectant.

Can you use Clorox on porcelain tile?

While porcelain tile boasts exceptional durability, there are few products and techniques you should take pains to avoid: Never use a product containing ammonia or bleach (or any type of acid-based cleanser); these can alter the tile color and/or stain the grout. Never use oil-based detergents or wax cleaners.

31 Related Question Answers Found

Will bleach damage tile?

Chlorine bleach is a powerful oxidizer that can remove stains in floor tile grout. But it can also remove color. Chlorine bleach can damage nearby fabrics and rugs if it is accidentally applied to them.

Does bleach ruin tile?

Bleach can damage your materials: Whether you're cleaning in between beautiful tiles or you're scrubbing at the grout around a fine porcelain fixture, the damage you're not seeing could be the worse prospect of all when it comes to cleaning with bleach.

Is vinegar bad for tile grout?

Grout that hasn't been sealed or needs to be resealed should not be cleaned with vinegar. The vinegar penetrates into the spaces for air in the grout and weakens them. Over time, vinegar will deteriorate the condition of the grout by etching or wearing away.

Do you need to rinse floor after mopping with bleach?

Once you have applied the bleach and water mixture to the floor with a mop or cloth, you do not have to rinse or take any further action. Instead, you should let the floor surface air-dry to thoroughly disinfect the area. The bleach will evaporate, leaving no harmful residue behind.

Can you leave bleach on tiles overnight?


Let the tile air-dry overnight before resealing the grout lines. Ordinary household chlorine bleach is an effective way to clean grout, but because you are using it full strength, caution is required when using it.

Is vinegar good for cleaning tile floors?

Vinegar is a natural, non-toxic product that safely deodorizes, disinfects and cleans most hard surfaces. When your porcelain or tile floors become soiled, vinegar can effectively clean them without harsh fumes. Mix 1/4 to 1/2 cup white vinegar with 1 gallon of warm water in a bucket.

How do you deep clean tile floors?

Deep Cleaning Techniques. Mop the floor with warm water and a vinegar solution. Mix 1/2 cup vinegar with a gallon of water and proceed to mop as usual. If the floor still doesn't look as clean as you would like, mop the floor again using fresh water and detergent.

How do you make old tile look new?

Give your old ceramic tiles a fresh look by applying a new paint color. Choose a paint color that complements the room's existing furnishings and decor. Clean your tiles and brush on a surface conditioner to prepare the tiles for painting. Use a paintbrush to apply a thin coat of enamel paint to each tile.

How do you make tile floors shine?

Vinegar, Borax and Ammonia
Combine 1/2 cup of white vinegar with 1/2 cup of ammonia and 1/4 cup of borax. Add 1 gallon of warm water to the ingredients and stir slightly to combine them well. Mop the tile floor with the cleaning solution, then rinse the floor well. Allow the floor to air-dry completely.

Is Vinegar a good disinfectant?


Acetic acid (a.k.a. white vinegar) is a great disinfectant. It also acts as a deodorizer and cuts grease. coli and other “gram-negative” bacteria with vinegar. Gram-negative bacteria can cause pneumonia, meningitis and bloodstream, wound or surgical site infections.

How do I keep my floor tile grout clean?

Method 1: Baking Soda, Ammonia and Vinegar
  1. Dip a sponge into the mixture or pour some into a spray bottle. Apply a liberal amount of cleaner to the grout and allow it to sit for several minutes.
  2. Scrub the grout with a small brush or old toothbrush.
  3. Rinse the treated area and wipe dry with a towel or rag.

What is the best product to mop tile floors with?

At a Glance: The 9 Models We've Chosen as Contenders for the Best Tile Floor Cleaners:
  • Black Diamond Marble and Tile Floor Cleaner.
  • The Floor Guys Grout-Eez Tile and Grout Cleaner.
  • Swiffer WetJet Spray Mop Floor Cleaner.
  • Black Diamond Marble and Tile Floor Cleaner.
  • Stainmaster Multi-Surface Floor Cleaner Concentrated.

What is the best product to clean and shine ceramic tile?

One of the best floor cleaning products, though, is one that is readily available in your home. Water is effective in keeping your tile floor looking great. You can also mix a cup of white vinegar with a gallon of water for a wonderfully effective, odor-eliminating cleanser.

Can you use dish soap to clean tile floors?

Floor Mopping
Mild dish soap is a surprisingly good floor cleaner. All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Floors will be clean and shiny in no time. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.

Can you use hydrogen peroxide to clean floors?


Floor Brightener
Brighten dingy floors. Combine half a cup of hydrogen peroxide with one gallon of hot water, then go to town on your flooring. Because it's so mild, it's safe for any floor type, and there's no need to rinse.

Is it OK to use bleach on ceramic tile?

Bleach is not needed in routine cleaning of ceramic tile, and is actually a bit of overkill. Use it only for bad stains and yellow grout.

Can you use CLR on tile floors?

DO not use CLR on natural stone or marble, terrazzo, colored grout, painted or metallic glazed surfaces, plastic laminates, Formica, aluminum, steam irons, leaded crystal, refinished tubs or any damaged or cracked surface. CLR may etch older sinks, tubs and tiles. CLR is corrosive.