Can you repair cast iron with JB Weld?

Asked By: Xuefang Doma | Last Updated: 25th February, 2020
Category: hobbies and interests jewelry making
4.1/5 (3,270 Views . 11 Votes)
Purchase a tube of epoxy putty such as JB Weld or Quick Steel at your local hardware store. These types of epoxies act as glue that will adhere to cast iron, filling the crack with a safe seal.

Click to see full answer


Correspondingly, can you repair broken cast iron?

Frequently, broken cast iron parts are repaired by welding. Broken cast iron parts are not unusual, given the brittle nature of most cast iron. When castings are made, molten iron is poured into a mold and allowed to slowly cool. When this high carbon material is allowed to cool slowly, crack free castings can be made.

Additionally, how do you repair a hole in a cast iron pipe?

  1. Put on a dust mask, safety glasses and work gloves.
  2. Remove loose metal debris and rust from the pipe at the area of the hole, using a steel putty knife.
  3. Use the putty knife to fill the hole with cast-iron patching compound.
  4. Loosen and remove the nut from the bolt on a rubber-lined sleeve clamp, using a nut driver.

Similarly one may ask, what is the best glue for cast iron?

Choose a cold-weld type of steel-reinforced epoxy -- commonly known as liquid weld -- for your bonding adhesive. This type of adhesive typically includes two separate tubes: a hardener and a resin.

Will JB Weld work on cast aluminum?

I am a professional tig welder and used to work at a local job shop one thing that I always hate is when someone brings in a case or any other aluminum component that they have tried to fix themselves, cast aluminum is very porous and the jb weld will get into the pores and it is almost impossible to weld.

36 Related Question Answers Found

How long will JB Weld last?

At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

Can JB Weld be sanded?

For the best bond, surfaces should be roughened (or scratched) with fine or coarse sandpaper. When fully cured, J-B Weld can be drilled, formed, ground, tapped, machined, sanded, and painted.

How do you fix wrought iron without welding?

How to Fix Broken Wrought Iron
  1. Sand the broken surfaces to remove approximately 1/4 inch of paint from both ends of the break.
  2. Remove grease and dirt from the surface of the wrought iron with a clean rag dipped in mineral spirits.
  3. Mix the epoxy weld or epoxy resin per the instructions on the packaging.

Is JB weld any good?

General Principles: Although JB WELD makes an excellent filler---and can even be used to cast small parts, it is not remotely as strong as real metal used this way. Whenever possible, use JB WELD as an adhesive---a very thin layer of JB WELD holding two pieces of metal together.

What is the best way to repair cast iron?


How to Repair Cast Iron With Putty
  1. Purchase a tube of epoxy putty such as JB Weld or Quick Steel at your local hardware store.
  2. Sand the cast iron with 80-grit sandpaper to remove rust and paint that may be covering the crack.
  3. Use dish soap, water and a rag to clean out the crack and surrounding surface area.

Will JB Weld work on transmission?

Re: Does JB Weld hold up to tranny fluid? Yes, if you clean the oil off, it will easily repair holes and cracks, been there, done that, Brake cleaner and some compressed air are you friends.

How hard is JB Weld?

J-B Weld™ is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. J-B Weld™ has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

Can you stick weld cast iron?

Cast iron is difficult, but not impossible, to weld. In most cases, welding on cast iron involves repairs to castings, not joining casting to other members. The repairs may be made in the foundry where the castings are produced, or may be made to repair casting defects that are discovered after the part is machined.

What is the strongest glue for metal?

Metal bonding epoxy adhesives

What is the strongest glue in the world?


The Adhesive
The name of the world's strongest adhesive is DELO MONOPOX VE403728. This is a modified version of the high-temperature-resistant DELO MONOPOX HT2860. This epoxy resin forms a very dense network during heat curing.

Does Super Glue work on metal?

Over time, these adhesive forces can deteriorate, and the glue will become less effective in holding the two pieces of metal together. However, for the short term, superglue works really well to glue two pieces of metal together. Yes, Super Bond super glue will work on metal.

Is Gorilla Glue good for metal?

Gorilla Glue bonds various materials such as metal, stone, wood, ceramics, foam, glass and many others – a list which many other glues can't boast. Gorilla Glue is perfect for most household projects, fixes and building repairs.

Can you solder on cast iron?

Soldering is appropriate for joining many types of metal, including cast iron. Since soldering requires temperatures between 250 and 650° F. You can solder cast iron yourself. , you can use a propane torch instead of the more powerful and dangerous oxygen-acetylene torch.

Is JB Weld good for cast iron?

JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials.

What is the life expectancy of cast iron sewer pipe?


In most cases, cast iron sewer pipes should last 75-100 years in a residential application. In commercial applications, the lifespan of cast iron drain pipes is 30-50 years.

Can You Use Flex Seal on cast iron pipes?

Many people have used Flex Seal liquid on cast iron pipes with great success just make sure it's not under pressure.

Can cast iron pipes be repaired?

Sometimes a small section of a pipe starts to crumble or a joint begins to leak even though most of the pipe is sound. If this is the case, you can easily make a repair. But if a cast-iron pipe is failing at several points, the most economical solution is to replace it with PVC pipe. This is a job for a professional.