Can Trex be glued?

In conclusion, sanded and flame treated TREX and SmartDeck produced the best adhesion. In both cases, a builder should see favorable results bonding TREX and SmartDeck (with some surface preparation) plastic/wood decking with WEST SYSTEM epoxy.

Regarding this, can you glue down Trex decking?

Glue cannot be used as a primary fastener for Trex decking. When using Trex Fascia, glue can be used as a secondary fastener-see Fascia instructions in the Installation Guide for more details Installation Guide for more details.

Secondly, can you screw into Trex? Screwing the Boards You can screw or nail composite decking boards just like wood ones. Three-inch decking screws are the best fastener choice; they sink a secure distance into the joists and won't back out like nails. There's little danger of splitting the boards when driving them, so you don't need to pre-drill.

Also to know is, can you router Trex decking?

We do not recommend routing Trex Brasilia® or Trex Escapes®. Routing will change the unique surface of this product. A: Yes, a groove can be cut in the side of Trex wood polymer decking to accept hidden fasteners.

What is the best cleaner for Trex decking?

Spray the deck with a hose to remove surface dirt and debris. Clean the deck with a soft-bristle brush and warm, soapy water. (Trex doesn't specify a brand of soap, so a dish soap such as Dawn is a good choice.) The brush will ensure you'll get any dirt in the embossed pattern.

39 Related Question Answers Found

Is Trex decking worth the money?

Is Trex Decking Worth the Price? We say YES! Here are some of the major benefits to making the investment in Trex decking: Trex decking is eco-friendly because it is made up of 95% recycled materials.

Can I put Grill on Trex Deck?

The Original Grill Pad

The flexible, lightweight pad is safe for use with any surface, including composite decking. Designed for use with both charcoal and gas grills, it is also suitable for a fryer, smoker, or other outdoor appliances.

Can you paint a Trex deck?

Yes, it is important to wait for Trex to fade (approximately 12-16 weeks) before applying paint or stain. If the Trex decking is painted or stained before it fades, the paint or stain could become discolored and adhesion may be compromised.

Is Trex decking slippery?

Composite Decking Doesn't Have to Be Slippery

Here's what's great about it: Resistance to Damage and Mold: Due to its rubbery quality, it possesses heightened resistance to scraping and gouging, reducing the risk of moisture entering the board and wreaking its slip-inducing havoc.

Is azek better than Trex?

Azek is quite a bit more expensive due to it's reputation of being really tough. However, Trex is also quite tough and is much more resistant to temperature change than Azek. On the other hand, Azek is more resistant to fading while Trex is much more environmental friendly, and the list goes on.

How hot does Trex decking get in the sun?

How Hot Can Composite Decking Get in the Sun? One study found that in direct sunlight, composite decks can reach temperatures from 34° to 76° F hotter than the surrounding air. On an 80° day, that could mean a deck surface temperature of more than 150°.

What is the difference between Trex Transcend enhance?

Unlike wood, high-performance Trex Enhance and Trex Transcend composite decking resists fading, staining, scratching and mold - and won't rot, warp, crack or splinter. Trex Enhance is offered in three nature inspired shades, while Trex Transcend is available in 10.

Does Trex need to be sealed?

You don't have to seal the surface once it's been cleaned, but I suggest you do. By properly sealing or staining composite decking, you could get several years of use out of it before you need to clean it again. If you decide not to seal the deck, you will most likely need to plan on cleaning it again every year or so.

What is the proper spacing for Trex decking?

Most composite decking materials, like Trex composite decking, require minimum joist spacing for composite decking at 16" on center spacing for straight decking and 12" on center joist spacing for 45-degree angle diagonal decking.

What is the gap between Trex boards?

One of the most critical steps for properly securing composite decking in place is to make sure you have at least a 1/8-inch gap between the decking boards. This space (approximately equal to the width of a 16-penny nail) is important for two reasons.

Can you change the color of Trex decking?

Although manufacturers demand that the color of trex or composite decking is permanent, they will surely fade in time. Therefore, you can surely paint your composite decking when you want to change the color completely or simply like to freshen the look of the deck.

How do you restore a Trex deck?

Clean the deck with Messmer's Composite Deck Cleaner, or another high quality wood cleaner of your choice, then rinse thoroughly with clean water. Make sure the deck surface is clean, dry and in good condition. You may need to wait a few days for the deck to completely dry depending on weather conditions.

Does Home Depot have Trex samples?

Trex - Deck Board Samples - Deck Boards - The Home Depot.

Do you need a special saw blade to cut composite decking?

For cutting laminates and composite, a finer tooth blade such as this 84-tooth blade from Diablo is required, however most blades designed for wood will not perform well with Trex or similar composite decking material. Some composites are made entirely of PVC, while others are a combination of PVC and wood.

Should you pre drill Trex?

Do I Need to Pre-Drill My Composite or Capstock Decking? However, with advancements in fastener technology, pre-drilling in most composite and capstock deck boards is no longer necessary. Composite deck screws have been consistently used by the industry for about 10 years now.

What screws do I use for Trex decking?

Trex recommends the use of Starborn® DeckFast® Fascia System, for all composite Trex fascia profiles. For near water applications, you can also use Fascia System HeadCote® stainless steel screws. If using 2 x 8 framing, use two screws every 18" (457 mm).

Should you pre drill deck screws?

Pre-Drilling Holes: The main benefit of pre-drilling holes for deck screws, or any screws, is simply preventing the wood from splitting. Often this is the only way to prevent splitting when driving screws (or nails) close to the end of a board.