Where do you nail Weatherboards?

Asked By: Palmer Eickmans | Last Updated: 15th January, 2020
Category: business and finance construction industry
3.9/5 (28 Views . 37 Votes)
Weatherboard should be secured by driving the nail as close as possible to the lower most edge of the siding without penetrating the top (or head) of the siding board beneath. E.g.: in observing minimum recommended lap of 21mm, nail entry should be around 25mm up from butt (or lower most edge).

Click to see full answer


Likewise, how much do Weatherboards overlap?

The weatherboards used on the outside of the building are 170mm wide, the manufacturer specifications give a minimum overlap of 25mm, therefore the coverage for each board is 145mm. The 145mm overlap can be increased, if the cut over openings is too severe.

Also Know, what is weatherboard cladding? Weatherboards are a type of cladding that is commonly used to cover the outside of a building so that it looks attractive and also protects the building. Weatherboards are made from timber or reconstituted hardwood that can be painted or stained to choice, or they can be made from vinyl.

In this regard, how do you install cladding?

Cladding is available in many different types and styles.

  1. Step 1 - Measure Exterior Walls of Home.
  2. Step 2 - Complete All Sheathing.
  3. Step 3 - Install House Wrap and Foam Insulation.
  4. Step 4 - Begin Starter Row of Cladding.
  5. Step 5 - Overlap The Next Rows.
  6. Step 6 - Finish a Wall before Installing Trim and Other Items.

How long does it take to clad a house?

2-5 days

32 Related Question Answers Found

How do you paint Linea Weatherboards?

How to paint Linea weatherboards
  1. Ensure the surface is clean and dust free.
  2. Fill any nail holes using Contract filler and gaps with Selleys Exterior No More Gaps.
  3. Spot prime filled areas with Resene Quick Dry Primer.
  4. Topcoat options: Recommend 3 coats of Resene Sonyx 101 waterborne semi-gloss.

What is a weatherboard stop?

Weatherboard stops
Each corner join has the cladding butting up to a weatherboard stop, a narrow piece of timber which is used at corners.

How do you measure for cladding?

When it comes to measuring a regular wall for cladding it's pretty simple, all you have to do is divide either the width or height of the wall (depending on panel orientation) by the width of the panels you intend to install. All of the following examples are based on a panel width of 250mm.

What kind of nails do you use for tongue and groove?

Common gauges for nails used in tongue and groove installation include 15, 16, 17 and 18. The gauge of a nail has nothing to do with its length. As such, it's possible to use 15-gauge nails with lengths of 1 inch, 1.5 inches or 2 inches.

What screws to use for cladding?


Using stainless steel nails is highly recommended for softwood cladding, even if the cladding is to be painted. The length of nails is also important. When using plain wire nails they should be long enough to achieve a point-side penetration of 2.5x the thickness of the cladding board into the support batten.

What is the best timber cladding?

Cedar is a softwood that is light in weight, with a relatively low density. Despite this, Cedar is one of the most suitable timbers to use for exterior cladding as it is stable and not prone to weathering.

How do you hang cedar siding?

Bevel siding should be face nailed to studs with 1-1/4 inch penetration into solid wood using one nail per piece spaced at a maximum of 24 inches on center. Place nail just above the overlap. Take care not to nail through the overlap of two pieces.

Does cladding need an air gap?

A gap (normally at least 25mm (1 inch) for timber) for air circulation is required behind the cladding to ensure that moisture is not trapped. This needs to be considered where insulation is required behind the cladding, most insulation materials will need to go behind the vapour barrier membrane.

Can you glue tongue and groove to the wall?

The boards can be glued or nailed to the walls, or both. I recommend a paneling adhesive and toothed trowel, or a paneling adhesive applied from a caulking gun. The last piece, next to the intersecting wall, should be cut to size and its tongue slipped into the groove of the adjacent board.

How much does it cost to clad a house?


The average cost of cladding a house of standard size is estimated at around $30,000 to $35,000. a home rent during your noisy and dusty house cladding project (may be up to $1,000 per week) and many other specific cost determinants.

Can you put cladding over bricks?

Installing Cladding Over Brick. Installing Cladding Over Brick, Is it possible? The short answer is Yes, You Can. Vynil wall cladding is a durable material that can allow you to change the look and feel of your home without tearing down brick walls.

Can I clad my house?

In most cases, you do not need to apply for planning permission for repairs, maintenance and minor improvements such adding external cladding to your house, provided that the materials you are using are of a similar appearance to those used in the construction of your house.

How do you install exterior wall panels?

  1. Prep. The first step in how to install paneling is to remove all wall plates, outlets and any nails in the wall.
  2. Measure. To install sheet paneling properly, you'll need to know how many sheets you will need.
  3. Level.
  4. Trim to Fit.
  5. Cut Openings.
  6. Apply Adhesive.
  7. Use Finishing Nails.