What thickness does EPDM come in?

Asked By: Yoselyn Bruckhaus | Last Updated: 2nd January, 2020
Category: home and garden indoor environmental quality
4/5 (548 Views . 31 Votes)
EPDM membranes are available in three typical thicknesses: 45 Mil, 60 Mil and 90 Mil. The Mil refers to thousands of inch for example the 60 Mil material would be very close to 1/16th of an inch thick. Even the 45 mil thick EPDM rubber membrane is sufficient for most small to medium size roofing jobs.

Click to see full answer

Consequently, how thick is a roof membrane?

TPO is a type of roofing membrane that can come in a variety of thicknesses. The most common thickness is probably 60 mils. (A mil is a unit of measure where 1-mil is equal to 0.001 inches. So, a 45-mil roofing membrane is actually 0.045 inches thick; whereas a 60-mil membrane is 0.06 inches thick, and so on.)

One may also ask, how thick is PVC roofing? 80 mil

Subsequently, one may also ask, does EPDM roofing come in white?

Sure-White EPDM non-reinforced membrane is available in 60-mil and 90-mil thicknesses, can be ordered in widths up to 20' (6m) and standard lengths of 100' (30m) for fast, economical installations. Sure-White membranes are ENERGY STAR*- qualified, environmentally friendly and LEED® approved.

How long does EPDM last?

50 years

26 Related Question Answers Found

What is the difference between TPO and EPDM?

Believe it or not, TPO is actually in a broad family of rubber roofing materials. TPO is a blend of polypropylene and ethylene-propylene rubber. EPDM stands for Ethylene Propylene Diene Monomer. It is a synthetic rubber derived from oil and natural gas (ethylene propylene).

How much does a roll of TPO cost?

TPO roofing material costs range between $160 and $500 per square. TPO roofing labor costs range between $500 and $800 per square.

What is the difference between TPO and PVC roofing?

While TPO has superior weathering and slightly better tear and break resistance than PVC, PVC does have some characteristics that certain customers need or prefer. Also, PVC is slightly more flexible than TPO, which some contractors like. There used to be talk about welding differences, but both membranes weld well.

How do you apply EPDM roofing?

  1. Roof Deck Preparation. Clean the roof surface prior to installation.
  2. Install Drip Batten. Install the Drip batten wherever a gutter is present.
  3. Install Drip Back Drip Trim. The Drip Trim has a front and back piece.
  4. Chase out Wall Upstand.
  5. Relax Rubber Membrane.
  6. Fold Membrane Halfway.
  7. Apply Deck Adhesive.
  8. Sweep EPDM Membrane.

How thick is a flat roof?

A minimum thickness of 18mm is recommended. The contractor should ensure that it is suitable for the particular roof structure.

What is 60m TPO roofing?

60 mil reinforced, heat-weldable TPO membrane used to cover exposed discs or fasteners. Use: Primarily used to "strip in" flashing details, gravel stops, TPO coated metal joints, and exposed fasteners in the roof field. Material: Flexible, 60 mil (1.52 mm) thick, reinforced TPO (thermoplastic polyolefin).

What is 60mpo TPO?

PRODUCT: TPO Roofing Membrane, 60 Mil, Energy Star WHITE, Reinforced. TPO single ply roofing is designed for all types of commercial and residential single-ply roof construction and re-roofing applications. TPO membrane is suitable for both mechanical and fully-adhered roofing systems.

Is EPDM better than TPO?

That being said, TPO seams tend to be much stronger than EPDM seams because of the way they are adhered to the roof. While EPDM is usually placed in a single sheet without seams, if there are seams, they may not be as strong.

Are EPDM roofs any good?

EPDM rubber roofing is also very lightweight, so the roof deck doesn't need any kind of reinforcement. Because there are few seams, leaks are fairly rare and a good quality EPDM roof can last up to 20 years. Installers also have options of how they will install the material.

Can EPDM be installed on plywood?

EPDM is applied with a body bonding adhesive. You can glue any seams with lap adhesive and lap caulk the very edge. EPDM can be glued to black insul board, roofing foam insulation board, OR directly to OSB or plywood. No need for sheets, blankets, or anything.

How much does it cost to install a rubber roof?

Average cost: $8,000 - $14,000
Rubber roofing costs anywhere between $8,000 to $14,000 to install depending on the slope, pitch, and size of your roof. You can expect to pay $4.25 to $8.25 per sq. foot or $425 to $8825 per square installed on a standard sized single story home.

Does Home Depot sell rubber roofing?

Rubber - Roofing - Roofing & Gutters - The Home Depot.

Is a white roof cooler?

During the hottest point in the day inside the building (5:00pm), a white roof is 8.49% cooler (more energy efficient) than a non-white roof. During the maximum internal temperature increase hours of 7:00am – 5:00pm, a white roof is 6.97% cooler (more energy efficient) than a non-white roof.

What is EPDM roof membrane?

EPDM is an extremely durable synthetic rubber roofing membrane (ethylene propylene diene terpolymer) widely used in low-slope buildings in the United States and worldwide.

How much is an EPDM roof?

The Cost of an EPDM Roof
If you decide to go with an EPDM roof installation, you should expect to pay somewhere between $4 to $8 per square foot which works out to be about $6,000 to $12,000 for 1,500 square feet of roof.