What size plug does a tanning bed use?

All 120 Volt tanning beds with 16 or less lamps require a NEMA 5-15R receptacle (pictured above left) and a dedicated 15 Amp circuit breaker, while all 120 Volt tanning beds with more than 16 lamps require a NEMA 5-20R receptacle (pictured right) and a 20 Amp dedicated circuit breaker.

Moreover, what kind of plug do you need for a tanning bed?

Sunco Inc. 2013 Energy Ratings

Tanning	Bed Voltage	Cost Per Session
Wolff 16	110VAC, 15A	3.8 Cents
Wolff 24	110 VAC, 20A	3.7 Cents
XS Power 16	110 VAC, 20A	2.5 Cents
XS Power 24	110 VAC, 20A	2.8 Cents

Beside above, what size breaker do I need for a 220v tanning bed? Electrical Requirements: 20 Amp Circuit Breaker. 20 Volt Dedicated Circuit. Important: Voltage must be below 230 VAC or may require a buck booster.

Similarly, are tanning beds 110 or 220?

Most 24 lamp systems are 220 volt, which means an electrician has to run a 220 volt line to the bed. A 110 volt bed can be moved easily around the home without the help of an electrician. While 24 lamps light up, this tanning bed is only slightly more powerful than a typical 16 lamp system.

How much does a tanning bed make your electric bill go up?

Owning your own tanning bed Assumptions: You buy a 24 lamp tanning bed for $2000, change your lamps every 800 hours, have an average session time of 20 minutes and have typical electrical rates. Same 4 sessions per week. 800 hours using Brilliance 5.0% = 2400+ session, at $0.10 cents of lamp cost per session.

30 Related Question Answers Found

Are 110 volt tanning beds any good?

Home Tanning Beds

There's no need for you to pay extra if you (or you and a couple of friends or family members) are going to be the only one using the tanning bed. A home 110 volt bed will also be better for residential use. Commercial beds are 220 volts and require their own circuit breaker.

Can I plug my tanning bed into my dryer outlet?

My question is, could I just plug the tanning bed into the dryer outlet? I would unplug the dryer, plug in the tanning bed when I wanted to use it, and then unplug it when i was done and plug the dryer back in. Yes, that will work, but you may have to have a different "pig-tail" installed on the bed.

What is the equivalent of 10 minutes in a tanning bed?

In a recent survey of adolescent tanning bed users, it was found that about 58 percent had burns due to frequent exposure to indoor tanning beds/lamps. 10 minutes in a tanning bed is equal to four hours on the beach!

Do tanning beds need to warm up?

Do I need to "warm up" the tanning bed? No, but you may find it more comfortable to warm it up if you have the tanning bed in a cool place, such as a storage area, or any other area that does not have heating/cooling. A few minutes is usually enough.

How many hours does a tanning bed last?

You can use your tanning bed bulbs until about the 500- to 800-hour mark, depending on the manufacturer and type of bulb. At the 500-hour mark, your bulbs may be only running at about 50 percent effectiveness. After about 1000 hours, your bulbs may not be working well at all.

What is the best brand of tanning beds?

Top 6 Tanning Beds Complete Chart

Name	Number of Bulbs	Rating (1-5)
Name	Number of Bulbs	Rating (1-5)
1. Solar Storm Wolff Systems Tanning Bed	24	4.6
2. Solar Storm 24S with Arm and Face Tanners	24	4.5
3. Solar Wave Tanning Bed	16	4.4

What is a buck booster for tanning bed?

A buck–boost transformer is a type of transformer used to make adjustments to the voltage applied to alternating current equipment. Buck–boost connections are used in several places such as uninterruptible power supply (UPS) units for computers and in the tanning bed industry.

Can I convert a 220v tanning bed to a 110?

You can convert a receptacle from 220 volts to 110 volts in one of two ways. The first is to use a 220 to 110 adapter. If you choose either of the second options, you'll have to install a new circuit breaker. 220V breakers are rated for more current than a 110V circuit can carry.

Do I need a buck booster for tanning bed?

Therefore you need a buck booster to Boost up the voltage to 220-240 Volts depending on what beds you have. But most likely you WILL need Buck Boosters.

What do I need to know about buying a tanning bed?

What to look for When Buying a Used Tanning Bed

1). Number of Hours on the Tanning Bed. If the tanning bed has a digital timer, most of them have an "Hour counter".
3). Tanning Bed Acrylics Condition and Care.
4). Overall Condition of the Tanning Bed.
5). Check if they have Proper Electrical Requirements.

How much is a good tanning bed?

Residential tanning bed: ranging from $1500 to $3700. With considerable quality and durability on an average, it will cost you approximately $2000.

Are tanning beds heavy?

Residential tanning beds are made to be easily moved around a home, and so don't use the heavy duty materials of many commercial beds, which can weigh as much as 500 pounds. A typical home tanning bed weighs half that much.

What is the difference between a 110v and 220v?

110V is typically the amount of current the wire can handle before it becomes unsafe, and the amount of voltage supplied to the outlet. 220V is, very simply put, 2 wires that combined produce twice the amount of voltage to the outlet.

How much electricity does it take to run a tanning bed?

It depends on the tanning bed, but a typical 24 lamp SunMaster uses less electricity than a hand held hair dryer. Even 220v tanning beds use very little more than this. This figures to about 5 to 10 cents per tanning session, depending on electricity costs in your state.

What is a RUVA tanning bed?

?Ruva. Our Ruva tanning beds offer a relaxing and effective experience. With a combination of primarily safe UVA rays and minimal UVB light crucial to the production of bronzing melanin, Ruva beds are perfect for developing and maintaining your preferred skin tone.

Are top and bottom acrylics always interchangeable?

if it is a bed where the top and bottom acrylic are interchangeable, switch it to the top until you can get in a replacement.

Is buying a tanning bed worth it?

Buying a Tanning Bed. If you only go to the tanning salon once a month or so, it might not be worth it for you to buy a tanning bed. However, if you would like to achieve a glowing tan by tanning for a few minutes each day, then a home tanning bed may be right for you.