What kind of oil does a 2011 Subaru Forester take?

Category: automotive crossover
4.3/5 (555 Views . 41 Votes)
The 2011 Subaru Forester non-turbo recommended oil grade is 0W-20 and turbo models recommended oil grade is 5W-30.



Also, what type of oil does a 2011 Subaru Forester take?

Synthetic Motor Oil

Additionally, what type of oil does Subaru use? Subaru Synthetic Motor Oil comes in two SAE weights: OW-20 and 5W-30. OW-20 is used in the non-turbo engine, designed for improved fuel economy and increased power. 5W-30 is formulated for the turbo engine, which runs at a higher temperature.

Similarly one may ask, what type of oil should I use for my Subaru Forester?

The recommended engine oil for the 2015 Subaru Forester 2.0XT models is a 5W-30 viscosity and synthetic oil. The recommended engine oil for the 2.5i models is a 0W-20 viscosity and synthetic oil.

How do you change the oil on a 2011 Subaru Forester?

  1. Getting Started.
  2. Open the Hood.
  3. Find Oil Drain. Locate the oil drain plug underneath the vehicle.
  4. Drain Oil. Set up the workspace, drain oil and replace plug.
  5. Find Oil Filter. Locate the oil filter.
  6. Remove Filter. Position drain pan and remove the oil filter.
  7. Replace Filter.
  8. Remove Oil Cap.

38 Related Question Answers Found

Can I put 5w 30 instead of 0w 20?

5W-30. The 5W-30 motor oil is another very good and highly efficient motor oil. Motors oils like this 5W-30 are also very widely used and most times general accepted by machine users especially car users instead of the 0W-20 is that they can function very well in all but highly extreme cold and hot temperatures.

Can I use 5w30 instead of 0w20?

It will only flow as a 0W when the temp dictates that it flow like a 0W. The difference in flow between a 0W30 and a 5W30 would only be different when the oil's temp is lower than the flow temp for it to behave like a 5W oil.

What happens if you put the wrong oil in your car?

Motor oil slip-ups.
The brand of motor oil matters little, but its viscosity grade (10W-30, for example) is important. Use only what the owner's manual specifies. Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so.

How much oil does a 2011 Forester take?

The 2011 Subaru Forester non-turbo models oil capacity is 5.5 US quarts (5.3 liters) and the turbo models oil capacity is 4.4 US quarts (4.2 liters).

Can I use 10w40 instead of 5w30?


I would not recommend going to a 10w-40 unless the engine had an oil consumption problem or was used exclusively in a high load application in hot ambient temperatures. 5W30 means that the oil has a thinner consistency in cold weather and will protect your engine at lower temperatures, at less thickness than 10W30.

Do Subarus still burn oil?

Two dealerships have told us that Subarus routinely consume 1/3 quart of oil every 1,200 miles. According to the manual, our Impreza holds 4.7 quarts of oil. By my math, Subaru engines are designed to burn 35% of oil between scheduled 6,000-mile changes.

Who makes Subaru synthetic oil?

Subaru is supplied by Idemitsu. IMHO, an off-the-shelf synthetic oil will just be fine, cost a lot less, and maybe even run better. Personally, go to wal-mart and buy yourself a 5qt jug of Quaker State synthetic for $20 and change.

How many miles can Subaru Forester last?

Though it didn't score quite as high as Legacy or Outback, Subaru Forester has posted a remarkable number of cars exceeding 200,000 miles since 2014.

Is full synthetic oil worth it?

Why Synthetic Oil Is Worth the Extra Cost. Synthetic oil is more expensive than conventional oil but offers superior protection for your car's engine. Synthetic oil provides more effective protection for your car, may even prolong the life of your engine and would cost the average driver just $65 more each year.

How often should I change the oil in my Subaru Forester?

For the most part, your Subaru needs an oil change every 5,000 to 7,000 miles. However, if you tend to travel under more extreme circumstances, you may want to consider having an oil replacement more frequently.

How long does synthetic oil last?

Synthetic Oil Change Interval
If you are using synthetic oil, the interval between oil changes can be extended. Manufacturer recommendations range from 5,000 miles to 7,500 miles, on average. Some recommended intervals might be shorter or longer.

Can I use 10w30 instead of 5w30?


Can I Use 10w30 Instead of 5w30? The 10W30 and 5W30 both have different thicknesses in cold temperatures, and 10W30 is thicker than 5w30. So, it is best for vehicles running in cold climates to use the 5W30 since it is thinner than the 10w30.

What is SAE 0w20?

Product Description. Mobil 1™ 0W-20 is an advanced full synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. Mobil 1 0W-20 is recommended for SAE 0W-20 and 5W-20 applications.

Can I use 5w20 instead of 0w20 Subaru?

At normal engine operating temperature, there is no difference between 0W20 and 5W20. They're both 20 weight oil. 0W20 is thinner than 5W20 at cold engine temperatures the first few minutes after you start your car. New cars spec it because it gives the car a bit better fuel economy.