What is the measurement in tape measure?

A tape measure is a portable measurement device used to quantify the size of an object or the distance between objects. The tape is marked along the tape edge in inches and fractional inches, typically in quarter-, eight-, sixteenth-inch increments.

Similarly, it is asked, what is CM on a tape measure?

The small, tight, narrow lines between centimeter markings represent millimeters (or one-tenth-centimeters). There are ten millimeters in a centimeter (and, thus, one thousand in a meter.) If your measuring tape doesn't have 0.5 centimeter markings, the fifth millimeter after each centimeter marks the 0.5 centimeter.

Similarly, what is 1/8 on a tape measure? The 1/8-inch mark is located between any two 1/4-inch marks. Most work tends to stop at this point, though in some cases you will need to measure down to the 1/16-inch mark. The 1/16-inch mark is the absolute shortest line on the tape measure.

Also, what comes after 7 8 on a tape measure?

As an example, the image below shows a length that goes from the inch mark to an unlabeled marking. We know it's more than 3/4 of an inch and less than one full inch. The marking is half way between 3/4 (6/8) and 7/8. Therefore, the marking is half of 1/8, or 1/16.

What is half of 1/3 8 on a tape measure?

Half of the number is nothing but dividing that number into two equal parts. So to calculate half of a number simply divide the number by 2 whether the given number is whole number or a fraction. Half of 3/8 = ((3/8)/2)=> (3/8)*(1/2)=3/16.

28 Related Question Answers Found

What is 1/3 of an inch on a tape measure?

1/3”= nearest to 0.85cm so 8mm or 9mm or somewhere I between if you can manage it! The ridiculous idea is that you need to be accurate with such approximate equipment. If you need to be more accurate than 8–9mm or 5/16” then you need proper measuring devices.

Why is 16 inches marked on a tape measure?

Standard US construction practice separates wall studs by 16 inches. Marking these on the tape makes it easier for the carpenter to see the relevant multiples.

What are the red numbers on a tape measure?

THE RED NUMBERS

Many tape measures add red numbers (or some other graphical standout) every 16-inches, a very common spacing for studs in house framing. This spacing allows for six supports in each 8-foot length.

What is half of 5/8 on a tape measure?

1 Expert Answer

Multiply 5/8 by 1/2.

How do you read a 1/32 tape measure?

To see how many thirty-seconds the object is in addition to the inches, count the number of 1/32 lines beyond the inch mark. If the tape measure is only marked in 1/16 inches, count the number of 1/16 lines, multiply by two and add one if the length is half of the distance toward the next mark.

How many 32nds are in an inch?

mm to Inch Conversion Chart
mm	Inches (approximate)
16	5/8	20/32
17	11/16	21/32
18	11/16	23/32

Can I use my phone as a tape measure?

Google AR 'Measure' app turns Android phones into virtual measuring tapes. Using the app appears to be rather simple. Simply launch Measure, point the phone's camera to an object, then pick two points to measure the distance in between. The virtual tape measure can measure either height or length.

How long is a tape measure in meters?

The tape is marked along the tape edge in inches and fractional inches, typically in quarter-, eight-, sixteenth-inch increments. Some tape measures are marked in millimeters, centimeters, and meters on one edge. The most common tape measures are 12 feet, 25 feet, or 100 feet in length.

How can I measure 1 meter without a ruler?

Check the length of your arm against a ruler or measuring tape to find out how close to 1 meter this distance is for you. One elbow length, or the distance from your bent elbow to the tips of your fingers, is 15 to 18 inches (35 to 48 cm) for most people.

What is an 8th of an inch in decimal?

Fractional Inches to Decimal Inches

Fraction	Decimal Inches	Millimeters
³⁄₃₂”	0.09375	2.38125
⁷⁄₆₄”	0.109375	2.778125
¹⁄₈”	0.125	3.175
⁹⁄₆₄”	0.140625	3.571875

Can you measure your height with a tape measure?

Use a tape measure — ideally a metal one that will remain straight — to measure the distance from the floor to the mark on the wall. Take note of the measurement to the nearest 1/8th of an inch or 0.1 centimeter.

How many 16ths are in an inch?

In this case, there are 16 units of smaller quantity (1/16 inch) in one unit of the larger quantity. Multiply the larger-quantity amount by the number of smaller units per unit of the larger quantity. Multiplying 16 by 0.5 gives you 8, so 8/16 equals 0.5 inches.

What are the fractions on a tape measure?

Reading a Tape Measure

Tape measure markings represent the fractions of an inch. Each large tick represents one inch (1″) and the ticks between represent the following fractions: ¹⁄₁₆“, ¹⁄₈“, ³⁄₁₆“, ¹⁄₄“, ⁵⁄₁₆“, ³⁄₈“, ⁷⁄₁₆“, ¹⁄₂“, ⁹⁄₁₆“, ⁵⁄₈“, ¹¹⁄₁₆“, ³⁄₄“, ¹³⁄₁₆“, ⁷⁄₈“, and ¹⁵⁄₁₆“.

How do you measure inches with your fingers?

* Use your own body for fast, approximate measuring. The first joint of an index finger is about 1 inch long. When a hand is spread wide, the span from the tip of the thumb to the tip of the pinkie is about 9 inches; from the tip of the thumb to the tip of the index finger, around 6 inches.

How do you read mm on a ruler?

To read a metric ruler to measure centimeters, look at the long lines on the ruler that are numbered 1-30, which are the centimeter marks. The distance between them is equal to 1 centimeter. There are smaller lines between the larger centimeter lines, which represent millimeters.

How do you measure mm on a ruler?

On a metric ruler, the numbers represent centimeters. The individual lines between the numbers represent millimeters. Each millimeter is one-tenth of a centimeter, so ten millimeters equals one centimeter. Before you start measuring, make sure that one end of the object is lined up with the 0 cm mark on the ruler.