What is stretch Board drywall?

Asked By: Abdel Killick | Last Updated: 27th April, 2020
Category: home and garden indoor environmental quality
4.8/5 (179 Views . 14 Votes)
1/2 in. ( ( 12.7 mm) tough rock stretch 54 lite-weight gypsum board is a wall or ceiling covering material for use in new building construction or renovation work. It has been specifically designed to perform like a ceiling board where improved sag resistance is desired.

Click to see full answer

Likewise, how wide is stretch Sheetrock?

ToughRock (Common: 1/2-in x 4-1/2-ft x 12-ft; Actual: 0.49-in x 4.49-ft x 11.99-ft) Stretch 54 Drywall Panel.

Furthermore, does drywall come in 9 foot lengths? Today most building supply warehouses carry drywall sheets in 54 inch widths. 54 inch widths allow you to stack two sheets and create 108 inches or 9 feet!

In this manner, does Home Depot sell drywall?

Drywall Sheets - Drywall - The Home Depot.

Do they make 1/4 inch drywall?

1/4-inch: Not a common thickness, 1/4-inch-thick drywall is used as a skimming (or double-wall) material for placing over an existing surface. 1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings.

32 Related Question Answers Found

How much is a sheet of Sheetrock at Home Depot?

Compare Similar Drywall Sheets
Price $11.28 $16.47
Ratings (317) (19)
Drywall Features No Additional Features Fire Resistant,Sag Resistant
Width (ft) x Length (ft) 4x8 4x12
Drywall Product Thickness (in.) 3/8 in. 1/2 in.

How much drywall do I need?

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.

Is sheetrock the same as drywall?

Drywall is a panel made of gypsum plaster pressed between two thick sheets of paper. It is used to make interior walls and ceilings. Drywall construction became prevalent as a speedier alternative to traditional lath and plaster. Sheetrock is a trademark for drywall made by the US Gypsum company.

Can I hang drywall myself?

Although you can install drywall by yourself, the job will be much easier if you have a helper or two--especially if you are covering the ceiling. The drywall is attached to framing with drywall screws or nails. Fill in low spots with shims attached with nails or glue.

How far should drywall be off the floor?

Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall.

How long should drywall screws be?

When installing 1/2 inch drywall, nails or screws should be at least 1 1/4 inches long and nails should be of a ring shank variety to provide better security and reduce the chances of “popping”. 3/4 inch drywall necessitates a slightly longer 1 1/2 inch nail or 1 3/8 inch screw.

Is drywall dust toxic?

What Is Drywall Dust? Short-term exposure to drywall dust irritates the eyes, skin, and respiratory system. Dusty construction sites can create coughing spasms, throat irritation, and breathing difficulties. Long-term exposure increases the risk for more serious health conditions associated with the dust ingredients.

What are the different types of drywall?

7 Drywall Types, Applications, and Uses
  • Green Board Drywall. Green board drywall, also known as moisture-resistant drywall, has a green covering that makes it more resistant to moisture than regular drywall.
  • Blue Board Drywall.
  • Paperless Drywall.
  • Purple Drywall.
  • Type X Drywall.
  • Soundproof Drywall.

Which way do you hang drywall?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls nine feet high or shorter, hanging the drywall horizontally has a number of benefits.

What is standard drywall thickness?

Standard Walls
The most common thickness of drywall used in residential interior construction is 1/2 inch. This material is recommended for walls with studs placed 16 inches on center. If the wall studs are placed 24 inches on center, a 5/8-inch drywall is recommended.

Can I buy small pieces of drywall?

x 1/2 in. Gypsum Patching Panel Drywall delivers a conveniently sized piece of interior drywall for making small repairs in damaged walls. This panel helps you patch your walls with minimal waste while offering a panel that is easier to transport compared to a full-sized sheet of drywall.

How much does a 4x8 sheet of drywall cost?

4' by 10': $11 per sheet. 4' by 14': $13 per board. 4' by 16': $15 per sheet. 4' by 9': $9 per board.

Is lightweight drywall as good as regular drywall?

Although both standard drywall and lightweight drywall are good for any room in your house (except the bathroom) the lightweight option is more user-friendly. Since it is lighter, carrying it around and hanging it isn't incredibly difficult.

How much does it cost to tape and finish a sheet of drywall?

Labor and prep costs
Type of Drywall Project Total Cost
Drywall installation for one or two standard-size rooms $900-$1,500
Hang and tape an outbuilding with about 40 drywall sheets at $0.75 per square foot $1,450
Scrape a popcorn ceiling in a kitchen, repair cracks in walls and prime $475

How much does a sheet of drywall cost?

The cost to install drywall is about $1.50 per square foot.
After material and labor are added in, the cost per panel can range from around $40.00 to $60.00. A typical 12x12 room, for example, will use 12 panels.

Will Home Depot cut drywall in half?

Yes, they will cut it for you and help you load it into your vehicle. You do need to realize that Home Depot will not take responsibility for accurate cutting or any breakage in the sheetrock, so you may need to buy an extra sheet to allow for damage in transit or whatever else might happen.

How much does a drywall hanger make?

The national average salary for a Drywall Hanger in the United States is $70,804 per year or $34 per hour. Those in the bottom 10 percent make under $32,000 a year, and the top 10 percent make over $151,000.