What is board board fencing?

Asked By: Saliou Albutt | Last Updated: 10th April, 2020
Category: home and garden home appliances
4/5 (509 Views . 35 Votes)
What is Board on Board Fence? Board on board fencing is constructed with an overlapping pattern of vertical pickets where every other board is attached to the opposite side of the fence rails, creating a gap in the fence.

Click to see full answer


Also know, what is a board on board fence?

A board on board fence is a fence that consists of central wood posts with wood fencing panels on either side. In other words, board on board fences layer vertical boards on top of each other. If installed correctly, every other board is attached to an opposite side of the fence rails, with small spaces in between.

Furthermore, how much does board fencing cost? Board Fencing Costs The cost of a typical wooden board fence is around $7 to $10 per foot while a privacy fence can cost up to $50 per foot. Fence posts can cost as little as $3 each while the horizontal boards cost around $8 to $10.

Beside this, what do you call fence boards?

Pickets, also called slats or boards, attach to the backer rails with nails or screws. They make up the body of the fence and are therefore the most visible component of the fence project. Pickets are available in multiple top styles such as dog ear, flat top and french gothic.

Should you leave a gap between fence boards?

When building a solid privacy fence, the fence boards are either butted tightly together, or spaced 3/8 to 1/4 inch apart to allow the wood to expand and contract in wet and dry weather. Thus, 6-inch fence boards would be spaced approximately 3 1/2 inches apart, since the actual width of a 6-inch board is 5 1/2 inches.

38 Related Question Answers Found

How many pickets do I need for board on board fence?

Add the slat or picket spacing to the width of each one, then divide this number into the total length of the fence to find the number of slats or pickets you need. For example, if you're using 6-inch slat, which is 5 1/2 inches wide, and you're spacing them by 1/2 inch, you need 400 of them for a 200-foot fence.

What is a good neighbor fence?

Technically, a “good neighborfence is a fence between two properties that both property owners are responsible for. The Civil Code provides that in California there is a legal presumption that a fence between two properties is for the benefit of both properties and is therefore the responsibility of both landowners.

What type of wood fence lasts the longest?

The most commonly used woods for fences are pine, cedar, and spruce. Each has a different lifespan. The longest lifespan belongs to cedar, which can last anywhere from 15 to 30 years. Pine is the middle ground and can last from about five years all the way up to 12.

How do you make a wooden fence with rot board?

How to Install a Rot Board on a Privacy Fence
  1. Determine the number and length of all required two-by-six rot boards.
  2. Stretch a tape measure from the outer side of the starting end post to the front and center of the next post.
  3. Set the board's narrow edge on the ground with its wider side against the front of the end post and the next post.

Is a gate considered a fence?


is that fence is a thin, human-constructed barrier which separates two pieces of land or a house perimeter while gate is (senseid)a doorlike structure outside a house or gate can be a way, path.

What is the top of a gate called?

The simple spiked top of the gate is called the spike/spear railhead but the more decorative bits are called finials.

Why is a picket fence called a picket fence?

Origin of the Picket Fence
According to the Online Etymology Dictionary, the term “picket” originates (in 1690) from the French “piquet,” from the verb “piquer,” meaning “to pierce,” hence the pointed shape of the picket. Once used as a weapon, the picket also helped form a barrier.

What is a metal fence called?

A chain-link fence (also referred to as wire netting, wire-mesh fence, chain-wire fence, cyclone fence, hurricane fence, or diamond-mesh fence) is a type of woven fence usually made from galvanized or LLDPE-coated steel wire.

What is a wood fence slat?

A horizontal slat fence is a fence that uses horizontal boards or planks that are usually spaced to provide some visibility through the fence. Slatted fences can use wood planks or pickets of the same width or varying widths. Check out these slat fences to get an idea of material options for your fence.

How much does a 3 board fence cost?


Average 2-, 4-, & 3-Rail Fence Prices
Number of Rails Total Material Cost
2 $50-$200
3 $75-$300
4 $100-$400
5 $125-$500

What is the cheapest fencing for horses?

Although you should never scrimp on safety for horses to save money, some less expensive choices exist.
  • Electric Fence. Electric wire or rope fencing is one of the cheapest horse fence materials, and it's also the easiest to install and remove.
  • High-Tensile Polymer Fences.
  • Rubber Fences.
  • Woven Wire.
  • Wood.

How tall is a 3 board fence?

Fences that are four feet tall are typically of the three rail or three board variety- and you will find that nearly all horse-wire distributors sell their standard field fence wire at the 48 inch mark.

How far apart should fence posts be?

Determine Spacing for Fence Posts
Decide how far apart you'd like to set the fence posts. Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

How tall is a 4 board fence?

Normal finished height is 48 inches, but a 4 board “post and rail” fence can be stretched up to 5 ft. tall without it looking odd.

How do you build a rural fence?


Six simple steps to building your Waratah fence
  1. Plan & clear your line. After designing your fence on paper, it's time to build it.
  2. Erect strainer assemblies.
  3. Lay out your posts.
  4. Drive in your posts.
  5. Strain the wire.
  6. Attach the Wire.

How do you make a wooden fence step by step?

wood fence posts
  1. Step 1: Plan Your Fence.
  2. Step 2: Measure and Lay Out the Fence Posts.
  3. Step 3: Dig Holes.
  4. Step 4: Add Concrete and Gravel and Position Posts.
  5. Step 5: Attach Rails or Panels to Posts.
  6. Step 6: Attach Pickets to Rails.
  7. Step 7: Attach Post Caps.
  8. Step 8: Stain or Treat the Wood.

What is the cheapest fence to build?

The cheapest backyard fence is barbed wire which costs as little as $1,050 an acre, wheres a split rail wood fence costs about $7,000 for 1 acre.