What is 17mm in standard?

17mm. Just short of 11/16 Inch. 0.66929 Inches.

Correspondingly, what is 17mm wrench in standard?

This table is the chart for publication of information of wrench sizes in inches (US) and millimeters (metric), as well as British spanner size information.

Wrench Size And Conversion Table.

Inches	Millimeters	Spanner
0.669	17mm	17mm
0.686		11/16 AF
0.709	18mm	18mm
0.710		3/8 Wworth; 7/16 BSF

One may also ask, what is the standard equivalent to 14mm? Standard / Metric Wrench Conversion Chart

Bolt Diameter	Standard	Metric
3/16"	3/8"	10mm
1/4"	7/16"	11mm
5/16"	1/2"	13mm
3/8"	9/16"	14mm

Keeping this in view, is 17mm the same as 11 16?

17mm = almost 11/16 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.

Is a 3/8 socket the same as a 10mm?

It's the same size. 3/8 is in inch and and its 10mm.

39 Related Question Answers Found

How many 32nds are in an inch?

mm to Inch Conversion Chart
mm	Inches (approximate)
16	5/8	20/32
17	11/16	21/32
18	11/16	23/32

What size is 16mm?

MM	Approximate Size In Inches	Exact Size In Inches
14mm	9/16 Inch	0.55118 Inches
15mm	Just short of 5/8 Inch	0.59055 Inches
16mm	5/8 Inch	0.62992 Inches
17mm	Just short of 11/16 Inch	0.66929 Inches

How thick is 2mm in inches?

Millimeters to inches conversion table

Millimeters (mm)	Inches (") (decimal)	Inches (") (fraction)
1 mm	0.0394 ″	3/64 ″
2 mm	0.0787 ″	5/64 ″
3 mm	0.1181 ″	1/8 ″
4 mm	0.1575 ″	5/32 ″

What size in mm is 3 8?

Fractional Inches to Decimal Inches and Metric Millimeters

Inches		Metric
Fractional	Decimal	mm
.	0.3740	9.5000
3/8	0.3750	9.5250
25/64	0.3906	9.9219

Is 8mm bigger than 5 16?

A lot of tool manufacturers consider 5/16 and 8mm interchangeable. 5/16 is roughly 2 thousandths of an inch smaller, 0.06096mm but on a hardened Allen bolt that should not be significant, and I have never stripped the interior socket of a harden steel Allen bolt.

How do you measure bolt size?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What size is 30mm in inches?

Millimeters to Inches table

Millimeters	Inches
29 mm	1.14
30 mm	1.18
31 mm	1.22
32 mm	1.26

What is smaller than a 7/16 wrench?

SAE to Metric Conversion Chart

SAE Size	Metric Size	Inches Decimal
13/32"		0.406
	11mm	0.433
7/16"		0.438
15/32"		0.469

How many millimeters are in an inch on a ruler?

25.4 Millimeters

What is 11/16 as a decimal?

fraction	decimal	fraction
21/32	0.6563	1 21/32
43/64	0.6719	1 43/64
11/16	0.6875	1 11/16
45/64	0.7031	1 45/64

What is the equivalent of 11 16?

68.75%

What does a millimeter look like on a ruler?

On a metric ruler, the numbers represent centimeters. The individual lines between the numbers represent millimeters. Each millimeter is one-tenth of a centimeter, so ten millimeters equals one centimeter. Before you start measuring, make sure that one end of the object is lined up with the 0 cm mark on the ruler.

What is the metric size for 11 16?

Math for the Toolbox. SAE to Metric Conversion.

inch	inch	mm
11/16	0.688	17.463
45/64	0.703	17.859
23/32	0.719	18.256
47/64	0.734	18.653

Decimal	Fraction	Percentage
1.25	²⁰/₁₆	125%
1.1875	¹⁹/₁₆	118.75%
1.125	¹⁸/₁₆	112.5%
1.0625	¹⁷/₁₆	106.25%

What size is 3/4 in MM?

Ear Gauge to MM Conversion Table

Gauge	Millimeters(mm)	Inches
8g	3.2 mm	1/8"
6g	4 mm	5/32"
4g	5 mm	3/16"
2g	6 mm	1/4"