What is a 18mm in standard?

17mm. Just short of 11/16 Inch. 0.66929 Inches. 18mm. Just short of 3/4 Inch.

Simply so, what is 19mm in standard?

Standard / Metric Wrench Conversion Chart

Bolt Diameter	Standard	Metric
3/8"	9/16"	14mm
7/16"	5/8"	16mm
1/2"	3/4"	19mm
9/16"	13/16"	21mm

Secondly, what is a 22mm socket in standard? 22mm socket equals: a 22mm socket approximately equals 7/8". 7/8" is just a hair larger (. 875 vs . 866) but should not round the bolt as long as you keep the socket 'square' to the bolt.

Just so, what's between 17mm and 18mm?

15mm = almost 19/32 inch. 16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch.

How many mm means 1 inch?

25.4mm

39 Related Question Answers Found

How many 32nds are in an inch?

mm to Inch Conversion Chart
mm	Inches (approximate)
16	5/8	20/32
17	11/16	21/32
18	11/16	23/32

How big is 2mm?

MM	Approximate Size In Inches	Exact Size In Inches
1mm	1/25 Inch	0.03937 Inches
2mm	1/16 Inch	0.07874 Inches
3mm	3/32 Inch	0.11811 Inches
4mm	1/8 Inch	0.15748 Inches

How thick is 2mm in inches?

Millimeters to inches conversion table

Millimeters (mm)	Inches (") (decimal)	Inches (") (fraction)
1 mm	0.0394 ″	3/64 ″
2 mm	0.0787 ″	5/64 ″
3 mm	0.1181 ″	1/8 ″
4 mm	0.1575 ″	5/32 ″

Is a 3/8 socket the same as a 10mm?

It's the same size. 3/8 is in inch and and its 10mm.

What does a millimeter look like on a ruler?

On a metric ruler, the numbers represent centimeters. The individual lines between the numbers represent millimeters. Each millimeter is one-tenth of a centimeter, so ten millimeters equals one centimeter. Before you start measuring, make sure that one end of the object is lined up with the 0 cm mark on the ruler.

What size is an inch?

One inch (2.5 cm) is roughly the measurement from the top knuckle on your thumb to your thumb tip. Measure yours to see how close it is to 1 inch.

What is standard and metric?

For both metric and standard bolts, the head size is the distance across the flats. For standard bolts, the head size is measured in inches or fractions of an inch. For metric bolts, head size is measured in millimeters. However, metric bolt head size is measured in millimeters.

How big is a mm on a ruler?

Rulers are often 30 centimeters long, which are designated by large numbers on the ruler. Between each centimeter (cm) mark, there should be 10 smaller marks called millimeters (mm).

What is the metric equivalent of 3/4 inch?

Math for the Toolbox. SAE to Metric Conversion.

inch	inch	mm
3/4	0.750	19.050
49/64	0.766	19.447
25/32	0.781	19.844
51/64	0.797	20.241

What size is 7/8 in MM?

This means 7/8 inches is the same as 22.225 millimeters.

What size is 3/4 metric?

US to Metric Conversion Table

US (inches)	Metric (millimeters)
9/16	14
5/8	16
11/16	17
3/4	19

What size is 30mm in inches?

Millimeters to Inches table

Millimeters	Inches
29 mm	1.14
30 mm	1.18
31 mm	1.22
32 mm	1.26

What size is 3/8 in MM?

Fractional Inches to Decimal Inches and Metric Millimeters

Inches		Metric
Fractional	Decimal	mm
3/8	0.3750	9.5250
25/64	0.3906	9.9219
.	0.3937	10.0000

What size is 32mm?

Wrench Size And Conversion Table

Inches	Millimeters	Spanner
1.181	30mm	30mm
1.200		11/16 Wworth; 3/4 BSF
1.250		1 1/4 AF
1.260	32mm	32mm

Is 8mm bigger than 5 16?

A lot of tool manufacturers consider 5/16 and 8mm interchangeable. 5/16 is roughly 2 thousandths of an inch smaller, 0.06096mm but on a hardened Allen bolt that should not be significant, and I have never stripped the interior socket of a harden steel Allen bolt.

What is smaller than a 7/16 wrench?

SAE to Metric Conversion Chart

SAE Size	Metric Size	Inches Decimal
13/32"		0.406
	11mm	0.433
7/16"		0.438
15/32"		0.469

Is 24mm the same as 15 16?

Not only is 15/16" basically the same as 24mm, but 1 1/16" is the same as 27mm.