How much does it cost to strip a deck?

Category: hobbies and interests card games
3.9/5 (3,363 Views . 17 Votes)
Cost To Pay Someone To Stain A Deck
Method Cost Per Square Foot
Stain & Seal $0.50 – $1.50
Power Wash, Stain & Seal $1.00 – $2.50
Power Sanding, Stain & Seal $2.00 – $4.00
Strip, Stain & Seal $2.50 – $5.50

Subsequently, one may also ask, how much does it cost to strip and stain a deck?

The larger the coverage area, the more the deck will cost. On average, the cost to refinish a deck is between $2.20 and $3.82 per square foot. Since a standard deck measures about 200 square feet, the average refinishing project will cost about $775 to $1,600. The cost of labor is typically an additional $350 to $650.

Furthermore, how long does it take to strip a deck? between 10 and 20 hours

Considering this, how much does it cost to remove decking?

According to national averages, the typical deck removal costs between $500 and $1,000. The exact cost of your deck removal project will depend on: the size and complexity of the deck.

Do I need to sand deck before restaining?

You need to let it dry completely before applying new stain. For reference as others have mentioneddon't sand a deck. Sometimes if you're staining the same color you can avoid sanding the whole thing. If you're staining though you want to be aware that some stains get darker with layers.

38 Related Question Answers Found

Do I need to strip deck before restaining?

Staining a previously stained deck
Quickly peel up the tape. If there are flakes of your stain on the tape, then you will need to strip your deck before restaining.

Do you need to remove old stain before restaining?

You don't need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.

How much should I pay to have my deck stained?

Average prices to re-stain a deck range from 50 cents to $2.50 per square foot, depending on the amount of prep work required, the type of stain used, and other variables. The national average cost to stain a deck is $813, which includes both commercial and residential projects.

How much should I pay someone to stain my deck?

Cost To Pay Someone To Stain A Deck
Method Cost Per Square Foot
Stain & Seal $0.50 – $1.50
Power Wash, Stain & Seal $1.00 – $2.50
Power Sanding, Stain & Seal $2.00 – $4.00
Strip, Stain & Seal $2.50 – $5.50

How often do you have to Restain a deck?

Most pros recommend you restain a horizontal surface every two to three years. That said, properly preparing, cleaning and drying the surface before applying a stain will yield the best results for the stain to last at least that long. You want to make sure there are no traces of sealant present on the deck.

How often should a deck be stained and sealed?

Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

Can you put new deck boards over old?

Can You Install New Decking Over Old Deck Boards? No; this is not a recommended practice. In many decking replacement jobs, joists end up being replaced, repaired or capped. This is due to the common discovery of decay beneath the decking, usually where the fastener penetrated the joist.

Can you put stain over stain on a deck?

Stain Choices
Don't use solid stain on a deck or any surface you want to walk on because it's too thin and won't hold up. You can use solid stain over existing solid or semi-transparent stain, but semi-transparent stain over solid stain will look strange and won't last. Don't skimp on stain quality.

Does a deck add value to a house?

Homeowners who installed a 16-by-20-foot pressure-treated wooden deck onto their house recouped an average of 85.4 percent of the cost of the project. On average, a deck which cost $10,347 to build added $8,835 to the value of the home when it was sold [source: Remodeling].

Do I need a permit to replace deck boards?

If you are just replacing some deck boards and maybe some railing then a permit is not required. If you are replacing anything structural like joists then yes you should get a permit. You will also want the deck inspected when you are finished.

Do you need a permit to demo a deck?

Do I Need a Permit to Demo My Deck? Removing your deck should not require a permit, but it's never a bad idea to double-check with your local building code office.

Is a patio or deck cheaper?

The cost of patio supplies will vary, depending on the materials selected. So, is a deck cheaper than a patio? Overall, a patio comprised of large pavers in a simple pattern will offer some savings over a deck built of wood or composite material. Of course, there's no rule that you can't have a deck and a patio.

Can I replace wood deck with composite?

Some homeowners may conclude that they need a new substructure just to get the appearance they want, but some composite deck manufacturers make complete composite deck systems. Wood can be replaced with composite boards on a one-to-one basis, and when properly installed will last against the elements.

Can you pressure wash stain off a deck?

Pressure washing removes all but the most durable deck finishes, but that's not all it removes. The high-pressure stream of water is effective against finishes because it is actually capable of removing the layer of wood to which the finish adheres.

How do you paint a deck without stripping it?

Painting wood without stripping it first requires careful preparation and high-quality primer to help the new paint bond.
  1. Put on a pair of protective eye goggles or safety glasses and a dust mask.
  2. Scrape off any old finish that is chipped or flaking off the wood with a paint scraper.

How do you strip a deck with a pressure washer?

  1. Remove all the furniture from your deck.
  2. Use a scraper or an iron-bristle brush to scrape away peeling paint on the deck.
  3. Apply the paint stripper with a paintbrush to a 10-by-10-foot section of the deck to soften the remaining paint.
  4. Set the power washer to a low pressure of 800 to 1200 pounds per square inch (psi).

What color should I stain my deck?

Gray can also work with contrasting colors like black and white to provide a sophisticated palette. Many homeowners like natural wood stain colors like Cedar because they are lighter and work well with country and rustic designs.