How much do concrete pavers cost per square foot?

Pavers cost between $1 and $15 per square foot, with most homeowners spending $2 to $4 per square foot on average depending on the size, material, style, and texture. Paver material choices include clay bricks, concrete, natural stone, cobblestone, rubber, plastic, and more.

Also asked, how much does a 12x12 paver patio cost?

Material Choices

Material	Price Per Square Foot	Total Cost
Concrete	$6-17	$864-2,448
Brick	$8-12	$1,152-1,728
Pavers	$10-25	$1,440-3,600
Flagstone	$15-30	$2,160-4,320

Secondly, what is cheaper poured concrete or pavers? Installation costs are typically lower for poured concrete. Pavers require more time in laying each stone and filling the gaps, and thus typically range higher despite a similar price per hour.

People also ask, how much are concrete pavers per square foot?

Pavers Price List

Type	Each	Average Per Square Foot
Thin Concrete Pavers	$0.50-$10	$2.50-$5
Interlocking Concrete	$0.50-$15	$3-$6
Stone Style Concrete Pavers	$8-$15	$5-$7
Natural Stone & Slate Pavers	$3-$20	$7-$16

How much should a paver patio cost?

A paver patio usually runs $8 – $20 per square foot to install. Natural stone pavers and concrete pavers can be used in a variety of patterns and designs for a patio. The cost to install pavers varies based on the cost of the pavers themselves and the complexity of the design.

37 Related Question Answers Found

What is the cheapest material to use for a patio?

Concrete is one of the most popular patio materials and the cheapest material you can use to build a hard-surface patio. Concrete is made of aggregates and paste—concrete aggregates can be crushed stone, sand, gravel, or even shells; the paste is made up of water and cement.

How many pavers do I need for a 10x10 patio?

Multiply the number of pavers needed to cover one square foot of patio by the number of square feet of the patio. In this example, 5.14 pavers are required per square foot for a patio that is 375 square feet. 5.14 times 375 equals just over 1,927 brick pavers required to complete the patio.

What is the labor cost to install pavers?

Paver Installation Costs

Base material: $2 to $5 per square foot. Average installation: $6 to $10 per S.F.

How much does a small patio cost?

The labour cost will vary depending on where you live, but if you budget for between £75 and £100 per square metre for the preparation and to bed the slabs down on a mortar mixture, you won't be too far off. (The cost of the patio slabs is on top of this, although the other materials should be included.)

How many square feet is a paver?

Paver Square Footage

Divide 144 -- the number of square inches in a square foot, which you determine by multiplying 12 inches by 12 inches -- by the number of square inches in the paver. In this case, 144 divided by 32 is 4 1/2 pavers per square foot.

How many square feet does a pallet of pavers cover?

There are 111 square feet in the Rectangle pallet. There are 104 square feet in the Small Rectangle pallet. There are 104 square feet in the Square pallet. A pallet of each totals 319 square feet.

How much is a square foot of concrete?

A typical concrete slab costs $4 to $8 per square foot with most homeowners spending between $5.35 to $6.17 per square foot, or $113 to $126 per cubic yard for both materials and installation. Your final cost will depend on the slabs size, thickness, and if you any special reinforcement such as wire mesh or rebar.

How many pavers do I need calculator?

The next step is to find the square footage of paver you want to use. Assuming the paver size is 12″ x 12″, multiply 12×12 and then divide 144 by the answer, ie. 144/(12×12) = 1.0. That means you need one paver per square foot, which makes sense since a 12″ x 12″ paver is 1 square foot.

How long does it take to install a paver patio?

Explanation: ground preparation along with installation of pavers can take hours for a few square feet. Explanation: An experienced installer installing proper base and a basic paver pattern should be able to install 800 square feet in 4 days.

Can you lay pavers over concrete?

According to several paver manufacturers, paving blocks can be installed on top of concrete without mortar if you first lay down a 1/2″ to 1” bed of coarse sand. The process is nearly identical to laying a paver patio over ground. Before you begin, make sure your concrete is properly sloped and doesn't puddle.

How do you install square pavers in a curve?

How to Make Curves With Pavers

Clear the area to be paved, the exact same way you would for laying straight pavers.
Use the garden hose to outline the curve you wish to make, laying it on the ground.
Dig out the area to be paved 6 inches to 8 inches deep, using the hose as your guide, and then install flexible bed edging along the boundaries.

How do you install pavers?

Prepare the Patio Area. Mark the perimeter of the patio area with marking paint.
Clear Grass and Soil.
Add Paver Base.
Add and Level Paver Sand.
Place the Paver Stones.
Cut Pavers.
Add Edging Stones.
Finish the Patio.

How much is a concrete patio?

Concrete Patio Costs

The average cost to pour a concrete patio is $2,433, with most homeowners paying between $1,212 and $4,318 for professional installation. Labor costs can run between $3 and $10 per square foot and materials cost $1 to $2 per square foot.

What are the different types of pavers?

There are three basic types of paver materials: natural stone, brick and concrete. Within these materials are hundreds of different styles and colors. For pathways and walkways, plan for a width of at least 3 feet.

What is a paver driveway?

Concrete pavers are available in a variety of shapes, styles, patterns, and colors, giving the homeowner plenty of choices to create a unique driveway that complements their house and landscape. Pavers used for driveways are usually interlocking, which both speeds the installation and strengthens the surface.

Is concrete better than pavers?

Concrete slabs are quite tough and resistant to impacts. However, paving stones are actually even stronger than concrete and can hold more weight on their surface before a crack occurs. On average, most pavers can withstand up to 8,000 PSI while concrete only supports up to 2,500 PSI.

How long will concrete patio last?

If properly maintained, both surface types can last upwards of 30 years. However, the sealant application is far simpler for concrete patios when compared with wooden decks.