How do you use a Creosote Sweeping Log?

Instructions for use:

Place CSL into your fireplace or wood-stove on the hot embers. For larger fireplaces or those with excessive creosote build-up use two CSL at the same time. CSL will burn for approximately 90 minutes. Let CSL burn out completely.

Also asked, do creosote sweeping logs really work?

Getting back to the question of “do those chimney sweeping logs really work?” the first part of the answer is yes, they do work – to some extent. These types of logs contain a chemical catalyst with can reduce the early stages of creosote buildup up to 60% with repeated use.

Similarly, will a hot fire remove creosote? A hot fire will burn out any creosote that may have formed overnight. They either burned the creosote before it could accumulate or kept the chimney temperature above 250ºF so that the smoke escaped without its gases condensing. The burn was controlled by the amount of wood in the stove.

Additionally, how long does a Creosote Sweeping Log burn?

approximately 90 minutes

Do Duraflame logs clean chimney?

In fact, tests show that a duraflame^® firelog has 66% less creosote accumulation per hour of fire than the creosote accumulation from burning a wood fire. Nevertheless, we recommend you have a certified chimney sweep inspect your chimney on an annual basis and clean it if necessary, no matter what you burn.

38 Related Question Answers Found

How often should you have your chimney cleaned?

How Often Should I get my Chimney Cleaned? This depends a lot on how much you use your fireplace or stove. The National Fire Protection Association says, “Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits, and correct clearances.

What is in a chimney sweeping log?

Chimney sweeping logs advertise themselves as an alternative to a professional chimney sweeping. As they burn, the smoke from the logs loosens creosote in the flue; as it loosens, the creosote then falls down and into the firebox where it can be easily removed.

Can I sweep my own chimney?

In many cases, you can clean the chimney yourself and save a few hundred dollars. Removing ordinary chimney soot is pretty simple. But if you have heavy creosote buildup, you'll have to call in a pro. Otherwise, hire a certified chimney sweep.

Do you burn a creosote log by itself?

Place CSL into your fireplace or wood-stove on the hot embers. For larger fireplaces or those with excessive creosote build-up use two CSL at the same time. CSL will burn for approximately 90 minutes. The creosote will be rendered less flammable and may begin to fall.

How do you prevent creosote build up?

How to Minimize Creosote Buildup & Prevent a Chimney Fire

Only burn dry, seasoned firewood.
Never burn artificial logs.
Build hot, clean burning fires.
Make sure the fire gets enough oxygen.
Reduce condensation by warming up a cold flue.
Schedule an annual chimney cleaning and inspection.

Do wood burning stoves need chimney sweep?

Where you have a wood burning stove or multi burner or, indeed, any type of solid fuel or wood fire, the chimney and stoves flue pipe must be swept regularly to remove all soot deposits and prevent blockage. Another indication a chimney is badly in need of cleaning is when soot falls on the register plate.

Do potato peels clean chimneys?

In all honesty, however, the old wise tale about burning potato peelings/skins does in fact help. Although you still need to have your chimney cleaned regularly, because even potato peels won't prevent the chimney from getting dirty, but it will help decrease chances of a chimney fire due to creosote.

What dissolves creosote?

How to Dissolve Creosote

Mix a bottle of anti-creosote liquids into a spray bottle.
Spray the liquid directly onto the creosote and scrub it clean with a wire brush.
Spray the liquid onto logs and burn the logs in the fireplace.
Burn a specially-treated log in the fireplace.

How can I tell if my chimney needs cleaning?

The following signs indicate a chimney in need of a cleaning:

Burned wood odors coming from the fireplace when it's not being used.
Fires that seem to burn poorly or that dump a bunch of smoke into the room.
A black damper. Since it sits right above the firebox, the damper is often the easiest thing to see and reach.

How long should logs dry before sawing?

one to two years

How fast does creosote build up?

It typically takes between six months and one year for cut wood to get to a low moisture content. Do not burn artificial packaged logs in your fireplace or your woodstove, since they leave a large amount of creosote deposits. Burn hot fires that have plenty of air.

Do aluminum cans clean chimneys?

One method to loosen crusty or tarry creosote so it flakes off and falls down into the firebox or fireplace is to burn aluminum cans in a very hot fire. While this method works, it does not clean the chimney of creosote completely, and chimney brush cleaning is still necessary.

How much should a chimney sweep cost?

Chimney sweeps typically charge per job. It is generally a straightforward job, assuming there are no abnormal blockages such as a bird that has become trapped or a large bird's nest. On average, we have found that a chimney sweep will cost £50 to £80 in most parts of the country, and closer to £90 or more in London.

What temp does creosote form?

451 degrees

How do you test for creosote build up?

How to Tell You Have Creosote

Gather your supplies. You should wear a face mask and goggles, and grab a flashlight and your fireplace poker.
Check that it's safe. Make sure there is a downdraft first.
Use your fireplace poker. Scratch the smoke chamber above your damper to see if there is any creosote.
Shine the light.

Will a chimney fire burn itself out?

Any combustion will cease when all the available fuel has been consumed. A flue fire will be extinguished when there is nothing left to burn. Flue fires rapidly reach temperatures in excess of 2000° F. The thermal shock caused by this rapid escalation of temperature will damage ceramic or clay flue liners.

How do I burn a CSL log?

For large fireplaces or when using 2 CSL at the same time:

Remove the two CSLs from the box and place them both in your fireplace, 1 foot between each.
DO NOT place the two CSLs on hot embers. Placing two CSL logs on hot embers may cause the fire to burn too intensely.