How do you fix rusted pitted Chrome?
Category:
automotive
motorcycles
How to Clean Rust Pitted Chrome
- Remove the rust from the chrome finish of the part. Use a fine grade of steel wool to lightly buff away the rust.
- Use a toothbrush dipped in household cleanser to clean hard-to-reach areas in the chrome part such as cracks or crevices.
- Polish the cleaned, rust-free chrome using a soft cotton cloth and chrome polish.
Keeping this in view, how do you stop chrome from pitting?
How to Stop Chrome Rim Pitting
- Wash the rims with liquid laundry or dish detergent and water to remove any dirt or grime. Let the rims dry for a few hours, or wipe them dry with a clean rag.
- Locate the pitted areas using your fingers. Sand the affected areas with 180-grit sandpaper.
- Apply high quality chrome polish to the rims.
- Wrap a sheet of 80-grit sandpaper around a sanding block and sand the pitted area aggressively.
- Wipe the sanding dust off the metal with a rag.
- Scrub the metal with a wire brush to remove rust particles from inside the pits and wipe off the particles with a dry rag.
Also to know, what causes pitting in chrome plating?
The two most common causes of pitting and services in a hard chrome plating bath are contaminants on the surface of the part and sticking bubbles.
WD-40 to Remove Rust. While WD-40 isn't only used for removing rust, it's considered a cleaning product that can be used in this capacity as well. The reason it works is due to WD-40's ability to cut through and dissolve the rust, restoring the surface to bare metal.