How do you drywall a curved wall?

Asked By: Rokia Bontrup | Last Updated: 27th June, 2020
Category: hobbies and interests woodworking
4.6/5 (223 Views . 30 Votes)
Measure the length of the curved surface and cut drywall to size. Using drywall screws, screw edge of drywall to stud in far corner. Attach a temporary piece of 1 x 2 to outside edge of drywall. Secure with drywall screws, through the drywall and into stud.

Click to see full answer


Similarly, you may ask, how do you plaster a curved corner?

How to Plaster a Rounded Corner

  1. Apply plaster to the surface of the flat trowel.
  2. Press your middle finger in the center of the trowel while holding it.
  3. Pull the flat trowel down the wall maintaining gentle pressure and its location relative to the corner.
  4. Apply some plaster to the bullnose corner tool.

Similarly, how do you build a curved wall shelf? To create a long shelf on either and inward- or outward-curved wall, make a continuous floating crescent from plywood. Simply use the traditional method of scribing -- using a compass or dividers to simultaneously trace the curve of the wall and mark it on a scrap of cardboard -- to make a cutting template.

In this way, how much can you bend drywall?

According to the Gypsum Association, standard 1/2-inch drywall can be bent around curved framing to a radius as small as 10 feet, as long as the panels are installed with their long edges perpendicular to framing members that are spaced no more than 6 inches on center.

How do you install trim on uneven walls?

First hold the base molding against the wall after you cut it to length, and look for gaps. If you see some, cut a few braces from 4- to 6-in. lengths of scrap baseboard and put 45-degree angles on the ends. Then apply construction adhesive at the top and bottom.

17 Related Question Answers Found

What is a scribe tool?

A scriber is a hand tool used in metal work to mark lines on workpieces, prior to machining. The process of using a scriber is called scribing and is just part of the process of marking out.

How do you copy a curve?

To Copy Curves or Edges
  1. In the graphics window, select the curves or edges to copy.
  2. Click Edit > Copy. The selected items are copied to the clipboard.
  3. Click Edit > Paste. The copy curves dashboard opens.
  4. By default, the curve type is set to Exact.
  5. Click on the dashboard.

How do you scribe a wall for a countertop?

Use a compass to scribe, or transfer, the wall's contour onto the laminate.
  1. Set the countertop in place where you plan to install it.
  2. Set your compass to fit the tip in the widest gap between the countertop and the wall.