How do you clean a Behr DeckOver?

Asked By: Exaltacion Tore | Last Updated: 13th March, 2020
Category: hobbies and interests painting
4.4/5 (692 Views . 40 Votes)
Apply BEHR PREMIUM DECKOVER Cleaner No. 5009 directly on dry, stained areas and work into surface with stiff bristled, non-metal brush or broom. For best results, use a plastic watering can or plastic pump sprayer to evenly distribute product. Let stand 10-20 minutes then scrub vigorously.

Click to see full answer

Thereof, how do you remove Behr DeckOver?

Start with the BEHR PREMIUM® Wood Stain & Finish Stripper to remove all of the previous coating. Apply the finish stripper product to your wood surface. Wait 15 minutes then scrub slightly with a stiff bristled broom. Rinse.

Additionally, can you use Behr DeckOver over paint? Yes, you can spray DeckOver. You will need to use an aireless sprayer (check with your local store to see if they rent them) with a 0.21" - 0.25" tip and remove the filter before spraying. Behr recommends, "when spraying vertical surfaces, apply a very thin coat (one pass only) and do not back brush/ roll."

Accordingly, how long does Behr deck over paint last?

4-6 hours before recoat. Dries to touch in 4 hours. Wait 24-48 hours before light foot traffic. 72 hours to full cure.

Is Behr DeckOver any good?

Feel free to also submit a Star Rating on the Behr Deckover coating. Bring new life to old wood and concrete surfaces with BEHR PREMIUM DECKOVER. This 100% acrylic formula conceals cracks and splinters up to 1/4″, and creates a smooth, slip-resistant finish that also resists cracking and peeling.

35 Related Question Answers Found

Can I paint over DeckOver?

DeckOver is itself an acrylic based product. If the DeckOver is in good condition, there should be no problem with coating it with an acrylic (latex) floor paint or solid hide acrylic deck stain. DeckOver is itself an acrylic based product.

How do you use DeckOver?

Pour Advanced DeckOver coating into a paint tray and work a roller into the tray until it is fully loaded with coating. For best results, use a ½” roller cover. TIP: For a more textured look use a Behr Premium Extra Textured Roller Cover with Advanced DeckOver Textured Coating.

Why is my deck stain peeling?

What causes deck stains to peel? Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. If there is too much stain, it restricts the moisture from evaporating away, so peeling can occur.

How do you restore a peeling deck?

Tips to Repair Peeling Paint on Deck Surfaces
  1. Remove any loose paint from the deck using a stiff brush or scraping tool.
  2. Lightly sand the area until smooth.
  3. Ensure the surface is clean and dry before proceeding.
  4. Apply the paint using a brush or roller.
  5. Allow to dry and apply a second coat if needed.

Should I prime my deck before painting?

The wood surface of your porch must be completely clean and smooth before you can properly apply primer. Otherwise, you will be able to see dirt and dust through the primer and paint. Finally, sand the surface smooth; the primer will have a better bonding surface, and the finished paint job will be more attractive.

Can Behr DeckOver be used on pressure treated wood?

Can Behr DeckOver be used on a new deck? Welcome to our community LaurieJeanne! Yes, you can use Deck Over on a new deck as long as the wood is not "green". Most pressure treated wood is green when it is sold, while yellow wood typically is dry when it is sold.

How do you remove thick paint from a deck?

  1. Remove all the furniture from your deck.
  2. Use a scraper or an iron-bristle brush to scrape away peeling paint on the deck.
  3. Apply the paint stripper with a paintbrush to a 10-by-10-foot section of the deck to soften the remaining paint.
  4. Set the power washer to a low pressure of 800 to 1200 pounds per square inch (psi).

How do you remove decking from concrete?

How to Remove Deck Stain From Concrete
  1. Mix 4 cups of powdered oxygen cleaner with 5 gallons of water in a 5-gallon bucket.
  2. Pour a small amount of mineral spirits over oil based deck stain.
  3. Pour another layer of mineral spirits and scrub the concrete again.
  4. Inspect the concrete for any remaining stain.
  5. Scrub the area with the oxygen bleach and water.

Can I flip the boards on my deck?

You bet you can flip them. There's no harm in doing so. While you're at it, be sure to clean off any debris from the top of the support joists and check for rot at those locations. When reinstalling the decking, keep at least 1/4-inch spacing for ventilation and easy cleaning in the future.

What is aircraft remover?

About Aircraft Remover
Rust-Oleum® Aircraft Remover is fast-acting and will efficiently remove all types of finish from metal surfaces. Effective on acrylics, lacquers, polyurethanes and baked enamels. Non-corrosive to all common metals under normal exposure time.

How long does Behr DeckOver need to dry before rain?

Dry Time. 4-6 hours before recoat. Dries to touch in 4 hours. Wait 24-48 hours before light foot traffic.

Is Behr DeckOver waterproof?

BEHR Premium Advanced DeckOver resurfaces properly prepared weathered wood and concrete and features even better adhesion and cracking resistance. This latest formula utilizes an advanced 100% acrylic resin to create a durable waterproof coating for your tired and worn out deck while rejuvenating its look.

What colors does Behr DeckOver come in?

  • Color Family. Beige / Cream(4) Blacks(4) Blues(8) Browns / Tans(84) Grays(36) Greens(24) Oranges/Peaches(24) Reds / Pinks(20) Yellows / Golds(12)
  • Container Size. 1 GA-Gallon(108) 5 GA-Gallon(108)
  • Brand. Rust-Oleum RockSolid(365) BEHR Premium Advanced DeckOver(216) Olympic(142) Ames(18) PenaShield(1)

What is the best deck coating?

Top-8 Best Deck Paints in 2020
  • KILZ Porch & Patio Latex Floor Paint.
  • KILZ Over Armor Textured Wood/Concrete Coating.
  • Anvil Deck-A-New Resurfacer Paint.
  • RTG Deck, Porch, Patio Anti-Slip Paint.
  • Durabak 18.
  • Interlux Interdeck Slip-Resistant Deck Paint.
  • Rust-Oleum Marine Topside Paint.
  • TotalBoat TotalTread Non-Skid Deck Paint.

What is the most popular deck color?

What are the most popular deck stain colors?
  • Cedar Tones and Semi-Transparent Colors. Cedar is by far one of the most popular deck colors and will fit on any deck and in any garden.
  • Brown Tones and Semi-Transparent Colors.
  • Honey Tones and Semi-Transparent Colors.
  • Redwood Tones and Semi-Transparent Colors.

What is DeckOver?

The new BEHR PREMIUM ADVANCED DECKOVER® resurfaces properly prepared weathered wood and concrete by filling-in cracks and taming splinters, extending the life of your deck and living space so you can enjoy the outdoors. This 100% acrylic formula conceals cracks and splinters up to 1/4".

What is the best deck restore product?

Behr DeckOver is available at Home Depot, and Lowe's sells Restore, made by Rust-Oleum. The 4X version, Rust-Oleum says, is four times as thick as other deck coatings; the 10X version is 10 times as thick. Olympic's version is called Rescue It! They're 100 percent acrylic, like the top exterior latex paint.