How do I set up a Meshare camera?

VIDEO

Beside this, how do I add a device to meShare?

Steadily hold your phone's display in front of your meShare camera until you hear “Device connected”. The distance between your phone and the meShare camera should be about 8 inches. Name your device and set a password for it. Tap "Next" to proceed.

Furthermore, how do I change the WiFi on my meShare camera? First, delete the camera from your account in the MeShare app. Then, connect your mobile device to the new wireless network that your camera will use. Plug your camera into a power source in the new location, launch the MeShare app from your smartphone, and login with your existing username.

Secondly, how do I reset my meShare camera?

Press and hold the factory reset button found on the side of the camera for 10 seconds. The LED light will turn off, then flash red. You will need to set up your camera again after factory resetting it.

Where is the reset button on Zmodo camera?

For the CM-I11123BK, flip the camera upside down and locate the "RESET" button on the bottom of the base. Press and hold the button for 15 seconds.

29 Related Question Answers Found

What is meShare?

The meShare Cam includes a Free 6 Month 7-Day Cloud Service Plan. You can record and playback from the Cloud. After the first 6 months, you can choose to continue the subscription. meShare cameras are now compatible with Amazon Alexa, allowing you to easily control them with voice command.

Is Zmodo and meShare the same?

Actually, Meshare app works the same as Zmodo app. These cameras can be added to both Meshare and Zmodo app.

What is Zsight?

Zsight app is designed to scan the QR code as ID of network video recorder or IP cameras. Just follow the steps in the manual to set up in your iPhone or Android smartphone, you can instantly view the live footage streaming from your IP cameras. Download Zsight for Your Operating System.

How do I delete my meShare account?

Just in case some is looking for this information:

login to Meshare ( you have to use the email where the device is registered on to remove it)
go to my account and click on the device you want to remove ( trash can icon side ) click yes to remove.

Is the Zmodo app free?

Zmodo is a great option for customers who want camera-based home security without paying a monthly monitoring charge or signing a contract. All of Zmodo's products can be self-monitored. The cameras all include 36 hours of video and audio storage for free.

How do I connect my meShare camera to Alexa?

Then open the Amazon Alexa application. Via the menu, navigate to the Skills & Games section. Search skills for meShare and enable the meShare skill. Sign in using your meShare account credentials and add supported devices.

How do I reset my WIFI camera?

Factory reset your Insteon Wi-Fi Camera

Connect your camera to your router using an ethernet cable.
Ensure your camera is connected to power.
Use a straightened paperclip to press and hold the recessed reset button for 10 seconds.

Why does my backup camera Say no signal?

Why does my backup camera say no signal? If you have a wired backup camera, wiring is more likely the problem. Again, checking your fuses to ensure everything is connected (and not blown) and going and tracing the wiring and cables from the camera to the display will reveal the problem to you.

Why does my trail camera take pictures of nothing?

Re: Trail-cam takes too many pics of nothing!

Might be grass or a limb triggering the cam. Post some pix. Sometimes sunlight on tree limb blowing in the wind is enough to trigger cam. Try low setting or clear objects from in front of cam.

How do I reset my Bayit camera?

If you forgot your camera password, you would need to reset the camera to factory settings and setup the camera as new. To do so, hold a pin in the reset hole on the bottom of the camera for about 10 seconds.

How do I reset my Android camera?

Go into Settings > Applications Manager and then swipe left for All Apps. Scroll down to the Camera app and tap on it. Now tap on Force Stop, then Clear Cache, then Clear Data. Don't worry: this won't delete any of your photographs, but it will delete your camera's settings so you'll need to set those again.

Why is my blink camera flashing red?

The red light on the Sync Module indicates an error in connecting to our servers, please try the following to resolve: 1. Please ensure you are using the correct password for your in home wi-fi network. This is usually printed on the router label or may have been set during the configuration of your router.

How do I reset my Lizacam?

What happens if it doesnt work?

plug the camera in and wait till its on for 30 seconds.
push a pin in the hole next to the light and hold it in until the light goes off AND goes back on. Then release the pin.
It will restart.

How do I reset my momentum camera?

To reset your Momentum Camera, hold the Reset button on the back of the camera for 5 seconds. During the reset sequence, the LED indicator light on the front of the camera will first display a solid red, then blinking red and blue. The camera will then be ready to pair again.

How do I reset Blink Sync module?

If you are having any issues with your Sync Module, it is best to first power cycle the Sync Module by unplugging the power cord from the back of the unit for 10 seconds and then plug it back in. This should cause the device to reboot and then reconnect within 45 seconds displaying a solid blue and solid green light.

How do I change the WiFi on my Zmodo camera?

First, delete the camera from your account in the MeShare app. Then, connect your mobile device to the new wireless network that your camera will use. Plug your camera into a power source in the new location, launch the MeShare app from your smartphone, and login with your existing username.

How do I connect my Zmodo to a new WiFi?

Press "Tap here to select WiFi" to go to your smartphone's WiFi settings page, and select your device's WiFi signal. If you're connecting a Beam, connect to the SSID called "AP_ZMD". If you're connecting any other 'Zink' WiFi device, connect to the SSID called 'ZMD_SAP'.