How do I connect my Schlage Lock to my phone?

Asked By: Ovidio Gaisendrees | Last Updated: 8th May, 2020
Category: home and garden smart home
4.9/5 (48 Views . 32 Votes)
In the SmartThings app:
  1. From the Home screen, touch the Plus (+) icon and select Device.
  2. Select Schlage.
  3. Touch Door Locks and Schlage Touchscreen.
  4. Touch Start.
  5. Choose a Hub for the device.
  6. Choose a Room for the device and touch Next.
  7. While the Hub searches: Press the Schlage button. Enter 6 digit programming code. Press 0.

Click to see full answer

Likewise, people ask, how do I connect my Schlage Lock to my Iphone?

Then, use the Schlage Home app to pair the lock again. If adding the lock from an iOS device, select “Explore Other Options” and then “Set up with Schlage system.” A firmware update may be required, after which you will need to restart the “Add a lock” process and select the Schlage system.

Beside above, do you need a hub for Schlage connect? You will need a compatible smart home hub to pair your lock to the device. 2. Which hub is required depends on whether your Schlage Connect Smart Deadbolt uses Z-Wave or Zigbee technology: Z-Wave-certified Schlage Connect Smart Deadbolt: Samsung SmartThings, Wink, Ring Alarm.

Just so, what app do I use for Schlage connect?

The free Schlage Home App for Apple iOS and Android lets you control and monitor your lock from anywhere using your smartphone. The app guides you through the setup process and puts complete access and control of your Schlage smart locks at your fingertips. Peace of mind in the palm of your hand.

Do all smart locks require a hub?

Smart locks that do not require a hub These are smart locks that you will not need a hub to connect to in order to use. Some, however, allows you to choose whether you want to connect them to a hub or not.

25 Related Question Answers Found

Does Schlage connect work with Bluetooth?

Share All sharing options for: Schlage adds Android support for its Bluetooth smart lock. Schlage is adding Android compatibility to one of its Bluetooth-enabled smart locks. Schlage also just announced the Sense Wi-Fi Adapter, which will allow both iOS and Android users to access the lock remotely.

What is the difference between Schlage sense and connect?

Schlage Sense is nearly identical to its brother smart lock, Schlage Connect. The main difference between these two is that the Sense model is HomeKit-enabled. In other words, instead of being Amazon Alexa integrable, it follows Siri voice commands. The unlocking process of the Sense model is a bit different.

How do I register my Schlage products?

to reach the Product Registration Page:
  1. Go to
  2. Click "Commercial"
  3. Click on "Support"
  4. Click "Product Registration"
  5. Click on "Register your Schlage Express software here"
  6. Fill out the form and the information will be send directly to the email you entered.

How do you open a Schlage Lock with a dead battery?

How do you unlock a Schlage Control lock that has a dead battery?
  1. Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw.
  2. Wait for 1 red light and then 3 green lights with 3 beeps.
  3. Present a valid credential.
  4. Rotate the bolt throw away from the door edge.
  5. Replace the batteries.

Why does my deadbolt lock stick?

If the deadbolt works fine with the door open, then you must try to find the cause of the alignment problem that is making it stick. The tolerances between the deadbolt and the hole of the strike plate in the doorframe are relatively tight. Try tightening the screws in the hinges and give the deadbolt a try again.

How do I remove all codes from Schlage Lock?

You can also delete all user codes at once by pressing the Schlage button, entering in the programming code, pressing “6”, and then entering in the programming code again. This will prevent you from unlocking your door with a user code (since there are none) until you create a new user code.

What does the Schlage button do?

What is the purpose of the inside Schlage button on the Sense Deadbolt? The inside Schlage button is used to silence the alarm.

How does Schlage Connect work?

Pair your Schlage Connect Smart Deadbolt to SmartThings and use SmartApps to create customizable scenarios for your home.
  1. Lock and unlock from anywhere.
  2. Check the status of your lock.
  3. Add and delete user codes via the app.
  4. Get app alerts when a user code is entered.

What is Z Wave lock?

Safer, smarter homes are locked with Z-Wave. Smart locks provide you with peace of mind security allowing you to know who is coming and going from your home. Once the smartlock is connected to the smart hub, you now can remotely access your lock. If you didn't lock it, simply lock it with your smartphone.