How do I connect my iAquaLink 2.0 to WiFi?

Asked By: Angelberto Krup | Last Updated: 21st June, 2020
Category: home and garden home entertaining
4.7/5 (186 Views . 41 Votes)
After clearing the WiFi settings and with the Wired/WiFi switch set to WiFi, use a smartphone or WiFi enabled device to go to WiFi settings. Connect to the network labeled iAquaLink. iAquaLink will display the networks it detects, as well as signal strength. Select the network iAquaLink should use.

Click to see full answer


Furthermore, how do I connect iAquaLink to Alexa?

1. How do I connect an Amazon Alexa-enabled device to my AquaLink® Pool Systems? Search for “iAquaLink” in Alexa skills and click “Enable to Use”, it will redirect to the iAquaLink login page. Log in with your iAquaLink app credentials.

Subsequently, question is, how does iAquaLink work? How it Works. The iAquaLink app lets you monitor and adjust all equipment controlled by the Jandy AquaLink pool control system. First, your equipment is wired to an AquaLink control center, which is installed at your equipment pad. Then an iAquaLink 2.0 Web Connect Device is connected to the control center.

Also to know, how can I control my pool from my phone?

iAquaLink allows you to control your pool anytime, anywhere. Using our free app for your smartphone or web-connected device, you can control all the elements of your pool or pool/spa system, even when you're on the go. iAquaLink can be used on more mobile device platforms than any other pool control system.

How do I reset my Jandy AquaLink?

  1. Press the "Menu" button.
  2. Scroll to and highlight "System Setup" using the arrow keys. Press "Enter."
  3. Scroll to highlight "Clear Memory," then press "Enter." You have now reset your AquaLink system.

17 Related Question Answers Found

How does a pool system work?

Water in a swimming pool needs to circulate through a filtering system to remove dirt and debris. During normal operation, water flows through the filtering system through two or more main drains at the bottom of the pool and multiple skimmers around the top of the pool.

Where should a pool check valve be installed?

The most common use for a check valve is to hold the water in the pump when the motor shuts off. As such, a common location for a check valve is on the incoming suction pipe, in front of the filter pump.

How long can a pool go without a pump?

If you want to activate the pump once a day, start with six hours, but never go lower than five hours, especially in the summer. If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.

Can you turn a pool into a hot tub?


Turning your pool into a spa is the best option. The spa uses the same plumbing and mechanical systems as your pool, so installation will not break the bank. Adding a spa will extend your pool usage beyond summer because of the high temperatures of the water. Your pool can be a hot spring this fall.

What order do I add chemicals to my pool?

I would do chlorine first, pH second, then any order after that (because everything else changes so slowly that frequent dosing won't be necessary). Wait 30-60 min between each chemical addition.

How do I get my pool water clear?

Follow these simple steps to prevent cloudy pool water in the future:
  1. Run the pump for at least 8 hours daily.
  2. Maintain a pH within the ideal range of 7.2-7.6.
  3. Maintain chlorine within the ideal range of 1-4 ppm.
  4. Shock your water with a pool shock weekly and more frequently after heavy rain, high heat or heavy use.

What is pool automation?

Pool automation uses a control panel to control certain pool functions remotely through actuators and relays—most commonly the pump and heater, but it can also extend to lights, water features, and spas. Some automation systems are pool-specific.