Can you replace baseboards?

If you damage the wall beneath the level of the new baseboard, you can usually install the baseboard on top and it will cover the damage. If you damage the wall above the level of the baseboard, however, repair the damage and repaint the wall before installing the new baseboard.

Simply so, how much does it cost to replace baseboards?

Typical baseboard materials There are a variety of baseboard sizes and styles available, but generally speaking, fiberboard will be less expensive, with costs averaging 60 cents to $1 per foot. For wood baseboard, expect to pay 80 cents to $1.20 per foot, not including installation.

Similarly, how much does it cost to replace trim in a house? For the most part, however, homeowners can expect to spend anywhere between $400 and $600 on trim replacement at their homes. This includes not only the replacement materials but labor and cleanup as well. Those with larger homes or more trim to replace may wish to budget closer to $1,000 to be on the safe side.

Keeping this in consideration, how hard is it to replace baseboards?

Difficulty: Intermediate While the installation of the baseboard trim itself isn't hard, the cutting and measuring of the angles can be a bit tricky. The process is similar to installing crown moulding. A homeowner can easily learn how to install baseboards with this easy-to-follow project guide.

How do you fix loose baseboards?

Use a putty knife to spread a small amount of putty in any dents or holes in the wood above the nails. Allow it to dry overnight, then gently sand it smooth with 150- to 180-grit sandpaper. Touch up the area with paint that matches the baseboard to complete the job.

37 Related Question Answers Found

How tall should baseboards be with 8ft ceilings?

Here is a great rule of thumb: A standard 8-foot wall typically has a baseboard 3 to 5 inches tall, while a 10-foot ceiling calls for 5 to 7 inches.

How much does it cost to install and paint baseboards?

Cost to Paint Baseboards

Paint Baseboards Costs	Zip Code	Lineal ft.
	Low	Mid
Paint Baseboards – Installation Cost	$30.00 - $30.00	$50.00 - $70.00
Paint Baseboards – Total	$170.00 - $195.00	$300.00 - $345.00
Paint Baseboards – Total Average Cost per Lineal Foot	$1.82	$3.23

Do you have to remove the baseboards when installing laminate flooring?

If you already have baseboards in the room, you can do one of two things: Remove the baseboards and either reuse or replace them after you install your laminate.

How much does it cost to have baseboard trim installed?

Professional installation starts around $1.50-$2 a linear foot when included as part of a larger flooring or remodeling job, or $2-$4 for a stand-alone trim installation--making it $120-$320 for labor for a living room, or $750-$2,000 for for an average-sized home.

How do you install new baseboards?

First hold the base molding against the wall after you cut it to length, and look for gaps. If you see some, cut a few braces from 4- to 6-in. lengths of scrap baseboard and put 45-degree angles on the ends. Then apply construction adhesive at the top and bottom.

How do you price trim work?

Cost breakdown

Materials: wood trim averages $2-$3 per linear foot. More detailed trim tends to be more expensive (around $3-$4 per linear foot).
Labor: carpenters typically charge $70 per hour and can take one to three days (8-24 labor hours or $560-$1700) to complete the project.

What tools do I need to remove baseboards?

Tools You'll Need for Baseboard Removal:

Hammer.
Putty knife.
Utility knife.
Small pry bar.
Pliers.
Pencil.

Will Home Depot cut baseboards?

Yes, they can do straight cuts (no angled cuts) for you. Home Depot also offers a table saw that you can use yourself to cut the molding. Then, if you need help, you can take it to the back for assistance.

Do you caulk the bottom of baseboards?

Bottom Application

A bead of caulk is applied to the area where the baseboard meets the floor. Over time, as joists sag and foundations recede, gaps develop under the baseboard. In some cases, these gaps are wide enough that they allow air infiltration and can seriously impact your energy consumption.

How do you cut baseboards without a miter saw?

Draw a pencil line along the cut edge. This will be the contour of the baseboard. Cut along this pencil line 25 degrees away from the miter. This is called coping because it was traditionally done with a coping saw, but any rotary tool with a cutting blade can replicate the cut.

Where do you nail baseboards?

Nail Baseboard to Wall

Set the scribed baseboard in place. Next, at each stud location, hammer two 8d finish nails through the board, at a slight downward angle, near its top and bottom edges. To avoid marking the wood, use a nail set to drive the heads just below the wood surface.

How much does it cost to install baseboard per linear foot?

The costs of baseboard materials are generally reasonable, ranging from $0.60 per linear foot for basic styles in fiberboard to about $1.20 per linear foot for wood.

How much does it cost to install quarter round?

They want $18,000 for the work.

Shoe molding or quarter round installation	$ 1.25 L/F
Baseboard installation	$ 2.00 L/F
Shoe or base remove and re-install	$ 2.50 L/F
Cork Underlayment (sound control)	$ 1.25 S/F
Install common borders¹	$ 5.00 L/F

Is installing baseboards easy?

The most common baseboard corner is an inside 90 degree corner, and the easiest way to install baseboards to fit this corner is to cut two pieces of the baseboard at the edges and at an angle so they fit together when installed.

Does molding increase home value?

Does Crown Molding Increase Appraisal Value? Anything that gives a house a more stylish or elegant appearance will raise its appraised value. Simple, inexpensive additions like crown molding can add dollars when an appraiser walks through your house – but only if the crown molding is done correctly and tastefully.

Are crown moldings still in style?

If they have crown molding in their house=Crown molding never goes out of style. The only reason you no longer see it is because people can't afford it. If they don't have crown molding=Crown molding is out of style. The truth=Probably depends on the style of the house and the quality of workmanship.

How long does it take to trim a house?

It usually takes us about 3 or 4 weeks to complete one of these houses.