Will any car stereo fit in my car?

Car Stereo Sizing Options

Before considering other factors, the most important question you need to ask yourself is, “Will any car stereo fit?” The short answer to this is No. Not every head unit can fit in your car. Essentially, there are two main sizes: Single and Double DIN car stereos.

Thereof, are all car radios the same size?

The standard car stereo size is referred to as single DIN. Most cars have single DIN stereo slots. The measurement of a standard DIN slot is 2-1/8” (50mm) height by 7-1/8” (180mm) width. DOUBLE DIN slots are twice as tall as the standard single DIN slots, but they have the same width as single DIN stereos.

Additionally, will any double DIN fit my car? Before considering other factors, the most important question you need to ask yourself is, “Will any car stereo fit?” The short answer to this is No. Not every head unit can fit in your car. Essentially, there are two main sizes: Single and Double DIN car stereos.

Likewise, people ask, how much does it cost to install a stereo in a car?

Columbus Car Audio & Accessories sells a subewoofer package that includes an amplifier and an enclosure for $299. For a pair of car speakers, Columbus Car Audio & Accessories start prices at $39, with an average cost of about $70 for installation. Adding an anti-vibrator to a pair of speakers costs another $25.

Does Best Buy install car stereos?

Hi Nate – It'll depend on the specific radio you buy and the vehicle you're installing it in, as some cars will require additional hardware, and some decks may come with a free installation. Please reach out to an Autotech at your local Best Buy to get an estimate for your setup.

37 Related Question Answers Found

What is RMS power?

Mean power, or root mean square (RMS) power handling, refers to how much continuous power the speaker can handle. For example, a speaker with a 30W RMS rating but a peak rating of 60W means that speaker can comfortably run with 30 watts of continuous power, with occasional bursts of up to 60W.

How do I upgrade my car radio?

Build your system one step at a time. Building a great car audio system doesn't have to be a budget-straining, all-at-once proposition.
Replace the factory radio.
Get new speakers.
Quick tip about speakers.
Give your system more power.
Time for some bass.
Add a dedicated amp to the sub.

What does double din mean?

DIN refers to size 2″ x 8″ opening that a radio fits into. DIN stands for Duetch Industri Normen which the Germans starting using to standardize the radio's in Audi's, BMW's, Mercedes, VW's way back in the mid 80's. DOUBLE DIN is the same width of 8″ but is 4″ instead of 2″.

How do you install a car radio?

Step-by-step instructions

Prepare to install. Connect your new car stereo to the wiring harness. Prepare the dash kit, and insert your new stereo into the car stereo mounting kit.
Install. Connect the wiring harness, and install the antenna adapter.
Reassemble. Reassemble the dash, and enjoy your new system.

What are the best speakers for a car?

Best Performance: JL Audio C2-650X Evolution Series. You have likely heard of JL Audio if you have ever done any research on car audio.
Best on a Budget: Pyle Speakers.
Best Mid-Range: JBL GTO Series.
BOSS Audio Chaos Exxtreme.
Rockford Fosgate Prime.
Polk Audio db651.
Alpine SPS-610.
Kenwood KFC-1695PS.

How many watts is a factory car stereo?

Most dealers indicate the power rating of their standard factory car stereos to be 200w. However, this is quite misleading because there are differences between peak and RMS wattage.

Can I put a single DIN in a double din?

Single DIN or Double DIN Radio

If your radio measures roughly 7 inches long by 4 inches tall, then it's double DIN. In that case, you can install another double din radio, or you can use a single din unit with an installation kit. There is also a 1.5 DIN size that falls in between, but it is rarely used.

How many watts should my car stereo be?

If you're using your car's factory stereo — 50 to 200 watts RMS of power for the bass will do nicely. An aftermarket receiver — you might want 200 to 300 watts RMS of power for your sub. Amplified speakers with around 50 watts RMS per channel — plan on 250 to 500 watts RMS for bass.

What is single din?

DIN radio. A standard automobile radio body size. A DIN radio (single DIN) measures 2x7", while a double DIN measures 4x7". When factory radio/CD players are replaced with after market units, the DIN standard ensures compatibility; however, new or altered dashboard trim may be required. See DIN and DIN connector.

How do I match my speakers to my car stereo?

How to Match Speakers to a Car Stereo

Match the speaker's power handling specifications to your car stereo's power output. Car stereo speakers are designed to handle specific amounts of amplifier power.
Consider the sensitivity of the speakers. This is measured in decibels (dB) and is listed in specifications as SPL.

What are door tweeters?

Installing tweeters in your factory tweeter locations, or custom-mounting them on the upper part of your doors, will give you better stereo imaging and raise the soundstage to your ears. This is especially true if the tweeters are part of a component speaker system.

What is single DIN car stereo?

When a unit is referred to as a single DIN car stereo, or a single DIN car radio, that means it is the height and width outlined in the DIN standard. A small number of head units are 1.5 times the height of the DIN standard, which technically makes them 1.5 DIN.

Can you put a touch screen radio in any car?

Can we put touch screen infotainment in old cars? Yes you can indeed! You have 2 choices and they are only limited by the space left on the dash after you remove your old stereo.

What is a 2 way speaker?

2 way speaker system means that your speaker system has 2 types of speakers. One is the woofer and other is the tweeter. The woofer is meant to drive the mid range to high frequencies. These systems have the tweeter speaker which is meant to drive efficiently the high frequency range, i.e.,from 2KHz to 20KHz.

Do I need single DIN or double DIN?

A single DIN player is smaller and easy to operate. Size – Double DIN units are larger and their faceplate measures 7×4 inches. The double DIN head unit is twice as tall as a single DIN stereo head. Features – The 2 DIN heads have more features than their 1 DIN counterparts.

What is the difference between a car stereo and a receiver?

One such topic of confusion is the difference between car radios, car stereos, head units, and receivers. Car stereo: The entire sound system in a vehicle—includes both head units and speaker systems. Receiver: A specific type of head unit that features a built-in amplifier.

What is the size of a double DIN radio?

Head units come in either single (180 x 50 mm panel) or double DIN (180 x 100.3 mm panel) size.